Owner's Manual

Chapter 3 Preparing Documents

Function Key Settings

Function Key 1 Function Key 2

Function Key 3 Function Key 4

Four function keys are located at the top of the operation panel. These keys can

be used easily by one-touch operation on the operation panel by registering the

following items.

The following settings can be registered to the function keys:

• Manual Thickness Adjustment

Manually adjusts the paper thickness.

• Imprinter ON/OFF

Selects use of the imprinter when the optional imprinter is installed.

• Fixed Thickness Mode ON/OFF

Sets the paper thickness to a fixed thickness.

• Double Feed Detection ON/OFF

Automatically detects simultaneous feed of two or more documents during

scanning.

• Restore Memorized Setting ON/OFF

Registers the scanner settings that are set on the personal computer to the

function keys. Once settings are registered, they can be restored to the scanner

simply by pressing a function key.

Functions are registered to function keys in the application. For details on how to

“Scanning Utility 5000 Instructions”.

• Default settings are as follows:

Function key 1: Manual Thickness Adjustment

Function key 2: Imprinter ON/OFF (when this option is installed)

Function key 3: Fixed Thickness Mode ON/OFF

Function key 4: Double Feed Detection ON/OFF

• Details of functions registered to each function key are saved on the scanner. Note

that these details will revert to their defaults if the scanner is submitted for repair.

MEMO