Operation Manual

ManualsBrandsCanon ManualsAll in One PrinterDR-5020

Setup Instructions for the Canon DR-5020 and DR-5080C

A. Set Up the Scanner and Driver

The following steps need only be performed once. These steps simply set up the

scanner for use. If the scanner is already installed and working properly, you may skip

this section.

1. Prepare your Canon DR-5020 (black and white model) or DR-5080C (color scanning

model) scanner for use by following the directions in Chapters 1 and 2 of the DR-

5020/5080C Instructions booklet. You will need to provide your own SCSI card and

cable, since these items are not included with the scanner.

2. Turn on the scanner. The power button is located in the lower front left of your

scanner. Note: You must always turn on this scanner before you turn on your

computer, or the computer will not find the scanner.

3. Follow the directions in chapters 1 and 2 of the ISIS/TWAIN Driver Instructions

booklet. This will show you how to install the necessary software drivers for your

Canon DR-5020 or DR-5080C. For updated drivers (in case of problems), please go

to the Canon homepage located at: http://www.usa.canon.com. Under Support,

select Drivers and Downloads. Download and install the appropriate TWAIN driver.

B. Set Up WYNN

The following steps need only be performed once. These steps set up WYNN for you to

use with the Canon DR-5020 or DR-5080C scanner.

1. With the scanner and computer on, launch WYNN.

2. Choose Scanner Selection from the Advanced menu. Verify that the correct

scanner is selected. If not, select it from the list.

• For DR-5020: There should be an entry for "Canon DR-5020." Select that. If it

is not listed, select “Unknown Twain using: Canon DR-5020 TWAIN" or download

the latest Twainscn.ini file from the Freedom Scientific Website

(ftp://ftp.freedomscientific.com/users/hj/private/twainscn.ini).

• For DR-5080C: Select the entry for “Unknown Twain using: Canon DR-5080C

TWAIN."

3. Still in the Scanner Selection dialog, in the TWAIN Properties area, verify that none

of the three check boxes is selected. Then click OK to exit this dialog and save

changes.

4. Choose Scanning Settings from the Settings menu. You will do two things here.

a. Change the Scanning Contrast to “Normal Contrast."

b. Specify whether you are scanning color documents.

Summary of content (5 pages)

PAGE 1
Setup Instructions for the Canon DR-5020 and DR-5080C A. Set Up the Scanner and Driver The following steps need only be performed once. These steps simply set up the scanner for use. If the scanner is already installed and working properly, you may skip this section. 1. Prepare your Canon DR-5020 (black and white model) or DR-5080C (color scanning model) scanner for use by following the directions in Chapters 1 and 2 of the DR5020/5080C Instructions booklet.
PAGE 2
• • For DR-5020: Verify that the Color Scanning check box is not selected, then click OK. For DR-5080C: If you want to retain color in color pages, select the Color Scanning checkbox, then click OK. Otherwise, uncheck this item. Note that color scanning takes significantly longer than black-and-white scanning, so it is better to leave this item unchecked unless you need color. 5. Save these settings. You must save these scanning settings to make them available for future sessions.
PAGE 3
Note: Depending on your particular Windows settings, the file extension (or even the entire file) may be hidden. To change this, open Windows Explorer and choose Folder Options from the Tools menu. Click the View tab and select Show Hidden Files and Folders (this item might be worded slightly differently depending on your operating system). In addition, uncheck the Hide Extensions for Known File Types checkbox (this also might be worded differently). Click Apply to All Folders and then click OK.
PAGE 4
Note that the instructions for double-sided scanning differ depending on whether you are using the Canon 5020 or the 5080C scanner. Single-sided Scanning: When doing a batch scan of single-sided pages: 1. Set the Simplex/Duplex button: Set the scanner's Simplex/Duplex button to Simplex (single-sided). 2. Begin scanning: Place a stack of pages on the scanner and press WYNN's Scan button (make sure you are using Large Batch scanning mode, per the instructions in Section B, Steps 4 and 5). 3.
PAGE 5
Double-sided Scanning using the DR-5080C scanner: When doing a batch scan of double-sided pages using the DR-5080C model, you will use WYNN's duplex capabilities. The 5080C always uses Simplex mode with WYNN, so WYNN must handle the duplex functionality itself. To do this: 1. Set the Simplex/Duplex button: Set the scanner's Simplex/Duplex button to Simplex (single-sided). 2.