Owner's Manual
45
Preparing Documents
3
Setting Scan Conditions
Selecting the Feeding Option
The procedure for feeding a document varies according to which feed mode is set.
You can choose from the following four feed modes using the Feeding Option key.
● Remote
In this mode, all of the Feeding Option lamps are out. This mode is enabled in
the Backup mode or Scanner Only mode. In this mode, start and end of
scanning are performed entirely on the application, and scanning is started
when start of scanning is instructed on the application with the document
placed on the document tray.
● Semi-Auto
In this mode, the Start key turns green when start of scanning is instructed on
the application. In the Filmer Only mode, the Start key turns green when Semi-
Auto is selected, and scanning is started by pressing the Start key after placing
the document on the document tray.
If you place the next document on the document tray after the first placed
document has finished being scanned, scanning is continued by pressing the
Start key.
● Auto
In the Backup mode or Scanner Only mode, scanning is automatically started
by placing a document on the document tray after instructing start of scanning
on the application. In the Filmer Only mode, scanning is automatically started
by Selecting “Auto” and placing a document on the document tray. If you place
the next document on the document tray after the first placed document has
finished being scanned, scanning is automatically continued.
● Manual
Use this mode to scan documents that are not fed well when placed as an
entire stack, for example, documents of paper quality that is more likely to
cause double feed. In this mode, you load the document one page at a time.
When you select Manual, the document tray rises. In the Backup mode or
Scanner Only mode, first instruct start of scanning on the application, and then
place the document one sheet at a time on the document tray to scan the
document. In the Filmer Only mode, select Manual, select Manual, and then
place the document one sheet at a time on the document tray to scan the
document.