Owner's Manual

61
Troubleshooting
4
Removing Paper Jams
Removing Paper Jams
Paper may have jammed if scanning stops midway or “PXX” appears on the
counter display.
Follow the procedure below to remove jammed paper from inside the DR-5060F.
CAUTION
● Be very careful when you remove a paper jam. You may be injured
unexpectedly. For example, the paper edges may cut your figures, or the
document may be damaged.
● Remove all jammed sheets of paper. Paper scraps left inside the unit may
be drawn into the unit again, causing another paper jam or malfunction.
● When opening or closing the upper unit, take care not to nip your fingers.
Paper Jam in the Paper Eject Section
1
Remove the documents from the document tray and the eject tray.
2
Remove the removable tray or document eject support plate if
they are attached on the document eject tray. Close the document
eject tray extension if it is open.
3
Press the open/close button, and slightly lift up the upper unit.
When the upper unit is lifted up, the error code “C01” appears on the display.