Owner's Manual

Chapter 4 Document Feeding and Scanning

Note

◆ Automatic Feeding

To use the automatic feeding mode, after you instruct the scanner to start

scanning from the application, the scanner will start scanning as soon as it

detects a document in the document tray.

Select [Automatic Feeding] in [Feeding Option] on the ISIS/TWAIN

driver’s settings screen.

Place the first page of the document face up in the document tray,

aligning the document’s top edge against the back of the document

tray. Adjust the document guides to the width of the document.

Instruct scanning to start from the application.

Automatic scanning does not start when the document is placed before you instruct

scanning to start from the application. Either press the [Start] key, or remove and

place the document again.

Align a batch of documents to be scanned until the edges are even.