Technical data

54
1. Messages
There are two types of display panel messages: “status indicator messages” and “error messages” that appear when the scanner
encounters a problem.
Status Display
The following messages appear on the display panel to
indicate the scanner’s operating state:
■ Count Only Mode
Status: Operating in Count-Only mode.
■ Ready
Status: The scanner is ready to use. If you do not perform
any operations for 10 minutes, the scanner will enter Sleep
mode.
■ Scanning...
Status: Scanning is in progress.
■ Sleeping...
Status: The scanner is entering the Sleep mode. Press any
key to recover.
■ Wait...
Status: The scanner is busy processing. Wait until the
display changes.
■ 01:XXXXXXXX
Status: The scanner is in Job Mode. Press the Start key to
scan, or press the Stop key to exit Job Mode. (See “About
the Job Function” on p. 25.)
00000
Coun t On l y Mode
00000
Ready
xxxxx
Scann i ng . . .
Sl eep i ng . . .
Wait...
01 : XXXXXXXX