Setup guide

113
Replacement parts
###HOME > Chapter 13 Appendix > Replacement parts###
Exchange roller kit (product code: 5484B001)
Kit to replace the rollers (feed roller, retard roller) and document holding
guide.
For the replacement procedure, see "When to replace the consumable
parts" on p.94.
Option
###HOME > Chapter 13 Appendix > Option###
Flatbed Scanner Unit 101 (product code: 4101B001)
Flatbed scanner unit that can be connected to and used with a DR
scanner. Connecting the unit to this scanner enables you to use this
scanner as a flatbed scanner with an automatic document feeder.
Flatbed Scanner Unit 201 (product code: 6240B001)
This flatbed unit installs on the DR scanner to support A3 size documents.
Specifications are subject to change without notice due to product
improvements.
About the Flatbed Scanner Unit 101/201
###HOME > Chapter 13 Appendix > About the Flatbed Scanner Unit 101/
201###
The optional Flatbed Scanner Unit 101/201 can be connected to and used
with this scanner.
System requirements
The computer must comply with the necessary system requirements of
Flatbed Scanner Unit 101/201.
The scanner driver of Flatbed Scanner Unit 101/201 needs to be installed
to use the unit.
Contact your local authorized Canon dealer or service representative for
detailed information about the replacement parts.
Product specifications are subject to change without notice.
z The unit cannot be used with OS X.
z CaptureOnTouch cannot be used with Flatbed Scanner Unit
201.