Setup guide

33
3 Place the document in the document feed tray.
Under default conditions, place the document with the folded edge facing right.
If the [Upside-down feeding] check box is selected in the scanner driver
settings, place the document with the folded edge facing left.
Setting Scanning Conditions
Configure scanning conditions as follows when scanning folded
documents.
Adjust the document guides to fit the width of the document. Otherwise,
the image may scan as skewed or shifted.
z The side of the folded document that is facing forward will be
the left side of the combined image.
z The maximum size for the combined image is A2.
Set the scanning condition for folded documents on advanced
settings dialog box of the scanner driver. You cannot set the
condition by CaptureOnTouch.