Setup guide

36
1 Opens the scanner driver's Detail Settings screen.
See "Select document settings" on p.52.
This will open the advanced settings dialog box for the scanner.
2 Click to display the [Scanner Information] dialog box.
The [Scanner Information] dialog box appears.
3 Click [Maintenance].
The [Maintenance] dialog box appears.
4 Select [Long Document mode (1,000 mm)] or [Long Document mode
(3,000 mm)] depending on the length of the document.
5 Click to close the dialog box.
Setting Scanning Conditions
Configure scanning conditions as follows when scanning documents in
Long Document mode.
CaptureOnTouch
Set [Page Size] to [Match original size] under [Scanner setting]. ("Select
document settings" on p.52)
Scanner driver
Set [Page Size] to [Detect automatically]. ("Page Size" on p.66)