Setup guide

43
5 To check the scanned image, click the [Finish] button.
To edit scan images, see "Operations for the scanned image edit window" on
p.49.
Click the [ ] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the main
window.
When the output has finished, a popup window will be displayed. If saving
the scanned image, a link to open the save destination folder will be
displayed.
This completes the Standard Scanning.
If scanning continuously, set the next document, and click the
[Scan more pages] button to start the document scan.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.