Setup guide

94
Chapter 10 Replacing Consumable
Parts
###HOME > Chapter 10 Replacing Consumable Parts ###
When replacing the separation pad, perform the following steps to detach
it from and attach it to the unit.
When to replace the consumable parts............................................ 94
Opening and Closing the Front Unit ................................................. 95
Replacing the Feed Roller.................................................................. 96
Replacing the Retard Roller............................................................... 97
Resetting the Counters ...................................................................... 98
Auto Power Off Setting..................................................................... 100
When to replace the consumable parts
###HOME > Chapter 10 Replacing Consumable Parts > When to replace
the consumable parts###
The two rollers (feed roller and retard roller) installed in the scanner are
consumable parts. The feed roller and retard roller wear with scanning. If
the feed roller and retard roller are worn, documents may not feed
correctly and paper jams or double-feed errors may occur.
When more than 100,000 pages have been fed (total number of pages fed
by the scanner), a message prompting you to replace the rollers is
displayed when the computer is started.
If this message begins to be displayed at startup, purchase an exchange
roller kit and replace the worn parts with the consumable parts included in
the kit (feed roller and retard roller). For details on the exchange roller kit,
see "Exchange roller kit (product code: 5484B001)" on p.113.