Owner's Manual

DATE
OPT RX OPT TX TEMP
Jan 28 2007 10:02:03 7 8 25
Jan 28 2007 10:03:03 8 8 25
Jan 28 2007 10:04:03 8 8 25
Jan 28 2007 10:05:03 8 8 25
Jan 28 2007 10:06:03 7 8 25
The transceivers can be managed via the SNMP protocol through
the built-in DT-MNG100 management interface. This interface, a
standard feature on all DT-100 Series models, provides out-of-
band management. A simple TELNET menu in the DT-MNG100
allows for management and configuration, and internally-stored
alarm and status logs can be downloaded via the FTP protocol for
problem analysis.
Management capabilities via SNMP, Telnet, and FTP
10Base-T
cable
Optical
fiber
SNMP
Manager
Network
SNMP Connection Sample
SNMP Connection Sample
Data Log Sample
Because the DT-100 series uses lasers, it is not necessary to obtain
radio frequency allocations, permits or licenses. In addition, this
system is not affected by nor does it cause any radio frequency
interference.
Requires no radio frequency allocations, permits or
licenses
Jan 28 2007 10:06:03 7 8 25
DT-100 Series
DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150
Applications
SDH/ATM/FDDI/Fast Ethernet
Gigabit Ethernet HD-SDI/SD-SDI/DVB-ASI
Standard Transmission Distance
(
*
1
)
20

500m
100

2000m
20
20

1000m
Data Transmission Speed
25

156Mbps
25

156Mbps
1.25Gbps
1.485Gbps
1.485/1.001Gbps, 270Mbps
(
*
2
)
Transmission Device
Laser Diode
Laser Wavelength
785

15nm
Laser Output Power
Approx. 7mW
Approx. 11mW
Safety Class of Laser
Class 1M
Receiving Device
Si PIN-PD Si APD
Auto Tracking Adjustment
Horizontal:

1.2

Vertical:

1.2

3R Function
 
� �
Media Interface
SFP SLOT x1
Console Port
RS-232C(DSUB-9Pin), 10Base-T(RJ-45)
Operation Temperature Range

20

C

50

C
Power
100-240VAC 50/60Hz
(DC-48V optional)
Power Consumption
Approx. 20W
Installation Environment
Indoor or outdoor (Weatherproof : IP56)
Dimensions
246(W)

168(H)

487(D)mm
Weight
Approx. 8Kg
Specifications
DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150
Gigabit Ethernet HD-SDI/SD-SDI/DVB-ASI
DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150
20
DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150
Si PIN-PD Si APD
� �
 
(*1) Above values are calculated under conditions of more than 99.5% reliability based on actual visibility data in Tokyo, Japa
n. Longer transmission distances can be achieved but this is a function of weather conditions and
acceptable link availability
(*2) This model is not compliant with SDI Check Field Signals (pathological signals)
Model Name
DT-SFPMM
DT-SFPSM
DT-SFPSX
DT-SFPLX
DT-SFPHD
Data Transmission
25

156Mbps 25

156Mbps
1.25Gbps
1.25Gbps
1.485Gbps,
Speed
1.485/1.001Gbps, 270Mbps
Applicable Model
DT-110, DT-120
DT-130
DT-150
Type of Connector
LC connector
Single-Mode Fiber (SMF)
Type of Cable
Multi-Mode Fiber (MMF) Single-Mode Fiber (SMF) Multi-Mode Fiber (MMF)
9

10/125

m
Single-Mode Fiber (SMF)
62.5/125

m or 50/125

m 9

10/125

m 62.5/125

m or 50/125

m
Multi-Mode Fiber (MMF)
(
*
2
)
9

10/125

m
62.5/125

m or 50/125

m
Maximum Length
2km
15km
220m (MMF 62.5/125

m) 10km (SMF 9

10/125

m)
10km
of Cable
500m (MMF 50/125

m)
550m (62.5/125

m or 50/125

m)
Applications
SDH/ATM/FDDI/Fast Ethernet
(
*
1
)
Gigabit Ethernet
Gigabit Ethernet
HD-SDI
(100Base-FX)
(1000Base-SX)
(1000Base-LX) SD-SDI, DVB-ASI
Optional SFP Module
156Mbps 25
m) 10km (SMF 9
Multi-Mode Fiber (MMF) Single-Mode Fiber (SMF) Multi-Mode Fiber (MMF)
m 9
(1000Base-LX) SD-SDI, DVB-ASI
Multi-Mode Fiber (MMF) Single-Mode Fiber (SMF) Multi-Mode Fiber (MMF)
m 62.5/125
(*1) Fast Ethernet requires 100Mbps fixed Full Duplex interface.
(*2) Please use mode conditioning patch cord with multi-mode fiber.
Management capabilities via SNMP, Telnet, and FTP
Requires no radio frequency allocations, permits or
licenses
DT-110 Type SFP DT-120 Type SFP DT-130 Type SFP DT-150
20

1000m
Specifications
Optional SFP Module