Instruction manual

97
E
Editing
Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio
signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as
output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder. Refer also to
the instruction manual of the connected device. Use the optional CV-150F (4 pin–4 pin) or CV-250F (4
pin–6 pin) DV Cable.
You can also connect to the VIDEO terminal ( 85).
R
L
AUDIO
VIDEO
S(S1)
-VIDEO
S-150 S-video Cable (supplied)
STV-150 Stereo Video Cable
(supplied)
DV Cable (optional)
Signal flow
Signal flow