Owner's Manual

BASIC OPERATION
50
• On manual lenses and accessories, it is not
necessary to push the mUlti-purpose lever in toward
the lens. Simply adjust the f/stop or shutter speed
until the meter needle is aligned with the stopped-
down metering index mark. When using manual
accessories between
the camera body and an FD
lens, lock the automatic/manual aperture lever in the
manual position before installing the lens. On all FD
lens except few, this is accomplished simply by
pushing the largest lever on the back of the lens
counterclockwise until it stops and locks into place.
On
the other lens which has a manual aperture lock
lever, the largest lever must be pushed to the manual
lock position and the manual aperture lock lever to
the "L" position .
•
You cannot make a meter reading w i th the 7.5mm
fish-eye lens mounted on tlje EF, because the
aperture scale
is not visible. Use a hand-held meter
instead.
FD 50mm fIlA S.S .C .
Apertu re Lever
FD 35mm f/3 .5 S.C.
Automatic / Manual
Ape rtu re Lever
Manual Aperture
Lock Lever