Canon 1 EOS-1 sa HS English Edition INSTRUCTIONS
^ Ш
Thank you for purchasing a Canon product. The EOS-1 V is a high-performance autofocus single-lens reflex camera equipped with high-precision Area AF. Photograph a wide variety of subjects under almost any condition. Let the camera do everything automatically or take full control. In any case, operation is simple with the electronic dials. Before taking pictures, read this instruction booklet and familiarize yourself with your new camera.
Contents Handling Precautions................................................................... 6 Nomenclature............................................................................... 8 Conventions Used in this Instruction Booklet............................. 12 Basic Operation..........................................................................14 Installing the Battery and Checking the Battery Level................ 19 Mounting and Detaching a Lens...............................................
Contents Setting the Film Speed Manually................................................73 ® Multiple Exposures................................................................. 74 Bulb Exposures.......................................................................... 76 Single-Frame and Continuous Shooting.................................... 77 Self-timer Operation................................................................... 79 Depth-of-field Preview..................................................
Handling Precautions Camera Care and Storage (1) The camera is a precision instrument. Do not drop it or subject it to physical shock. (2) This camera is not waterproof and cannot be used underwater. If the camera gets really wet, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe with a well-wrung damp cloth. (3) Do not leave the camera in places prone to excessive heat such as in a car on a sunny day.
Handling Precautions LCD Displays In time, the camera's LCD panel display and the LCD display in the viewfinder may fade and become difficult to read. If this happens, have it replaced (at cost) by a Canon Service Center. At low temperatures, the LCD display response may become slower. And at 60°C or higher temperatures, the display may blacken. In either case, the display will return to normal at room temperature. Lithium Batteries (1) The camera operates on one 2CR5 lithium battery.
Nomenclature • Reference page numbers are indicated in parentheses. • In the text, camera controls are indicated by their respective icons. Focusing screen (-^p.127) Lens mount Lens mount index (->p.21) Reflex mirror (->p.81) Seif-timer lamp (^p.79) Lens lock pin Shutter button (^p.14) Lens release button (->p.21) Depth-of-field preview button (-^p.80) Grip (Battery chamber) (->p.19) Camera back lock release button (->p.25) Grip screw HP-19) Camera back lever (-^p.
Nomenclature Flash-sync contacts Eyepiece shutter lever (->p.80) Hot shoe Shooting mode button (-^p.30) < -,8;- > LCD panel illumination button (^p.82) < [U > Metering mode button / < Flash exposure compensation button (-^p.50 / 89) < AF> AF mode button (-^p.34) Film advance mode button (->p.77) LCD panel (-^p.10) Exposure compensation button / Aperture button (->p.67/65) < ~ ^ > < PEL > FE lock button / Multi-spot metering button (-^p.87/53) < Strap eyelet (^p.
Nomenclature LCD Panel Aperture setting (u S ~ 5 Shutter speed ( 8 0 0 0 ~ 1 0 “ ) DEP points ( I , (?)--------- Bulb ( b u i b ) AEB amount (0 . 3 ~ 1 0 ) Bulb exposure time (OOSO ~ 5 3 3 3 ) Focusing point selection mode(/?F, 0 J , H P )— Depth-of-field AE (H E P ) Custom Function setting { 0 ~ H ) Focusing point selection mode ([ I I I , 5 E L ) Custom Function group (G ~ ISO film speed (5 ~ 6 4 0 0 ) ) ISO film speed stops (- 3 . 1 ~ B ) ■ Custom Function No.
Nomenclature Viewfinder Information Area AF ellipse_______ Spot metering circle Laser-matte screen ____ Focusing points Exposure level indicator Frame counter Frame countdown icon Manual exposure icon AE lock indicator Flash-ready indicator Correct exposure index High-speed sync indicator (FP flash) Exposure level increments 1:1 stop □ : 1/3 stop Shutter speed display (BuDO ~ BB") Overexposure indicator Bulb ( b u L b ) Flash overexposure indicator Depth-of-field AE (d E P ) Exposure level in
Conventions Used in this Instruction Booklet In this booklet, the < > icon indicates the Main Dial, <0> is the Quick Control Dial, <©> is the main switch, and < ^ > is the Quick Control Dial switch. All the operations described in this booklet assume that the <©> switch is already set to . Before proceeding with any operation, first turn the < © > switch to < ON > or < ■»)) >. • For dial operations, make sure the < ^ > switch is set to < ON >.
This chapter explains a few preliminary steps and basic operations of the EOS1V which you should know before you start taking pictures. If you will be using the camera for the first time, read this chapter first. If you are familiar with the basic operations of EOS cameras and want to start using the camera right away, see “Quick Start with Program AE” on page 29. ■ Before You Start Attaching the Strap Pass the end of the strap through the camera's strap eyelet and the strap's clasp on the under side.
Basic Operation Main Switch The camera operates only after the < This switch has three settings: > switch is turned on. The camera does not operate. Set to this position when not using the camera. To turn on the camera, set to this position. < ■»)) > This is the same as except that it also enables the beeper to sound in the following cases: • Focus is achieved in One-Shot AF mode. • Focus is achieved with manual focus.
Basic Operation Halfway pressing When the shutter button is pressed halfway, autofocusing (AF) is activated to focus the subject. Autoexposure (AE) metering is also turned on to set the correct shutter speed and aperture which are displayed in the viewfinder and on the LCD panel for ( < ^ 6 ) . Complete pressing This releases the shutter and takes the picture. After the frame is exposed, the camera advances the film automatically. Using the Electronic Dials There are three ways to use the < > dial: 1.
Basic Operation 2. After pressing a button, turn the < > dial. When a button is pressed, its function remains active for 6 or 16 seconds. You then look at the LCD panel and turn the < > dial during this time. After the function turns off or when you press the shutter button halfway again, the camera will be ready to take a picture.
Basic Operation There are three ways to use the : 1. While holding down a button, turn the <0> dial. 2. After pressing and releasing a button, turn the <©> dial. 3. Just turn the <0> dial. Look at the LCD panel to confirm the setting. To restore the button's function or to ready the camera for picture taking, turn the dial. The <0> is used to set the following: 1. Real-time exposure compensation 2. Aperture 3. Flash exposure compensation 4.
Basic Operation Resetting the camera to the default settings Open the side door and press the < CLEAR > button. ► This will reset the camera to the default settings shown in the table below.
Installing the Battery and Checking the Battery Level Installing the Battery The battery is housed in the camera grip. Remove the grip to install one 2CR5 lithium battery. • For the EOS-1 V FIS, see page 115. Remove the grip. • Use a coin to turn and loosen the grip screw as shown by the arrow in the figure. Slide off the grip downward. Open the cover. install the battery. • Install the battery so that the battery contacts are on the right and bottom. Then close the cover. Reattach the grip.
Installing the Battery and Checking the Battery Level Checking the Battery Level Check the battery level after replacing the batteries or before using the camera. Turn the <©> to . ► The battery level will be checked automatically and the LCD panel will then display one of the following battery level icons: Battery level OK. Keep spare battery handy. Battery will soon be exhausted. :q; Replace with new battery. Hp.7) Battery Life (No.
Mounting and Detaching a Lens Mounting a Lens Remove the caps. • Remove the rear lens cap and the body cap by turning them as shown by the arrow. Attach the lens. Red dots • Align the red dots on the lens and camera and turn the lens as shown by the arrow until it snaps in place. On the lens, set the focus mode switch to AF. • If the focus mode switch is set to MF (or M on older lenses), autofocus will not operate. Remove the front lens cap.
Dioptric Adjustment By adjusting the diopter to suit your vision (with or without eyeglasses), the viewfinder image will look clearer. The camera’s adjustable dioptric range is -3 to +1 dpt. Remove the eyecup. • While grasping both sides of the eyecup, slide it upward to remove. Turn the dioptric adjustment knob. • Turn the knob to the right or left until the focusing point or the center spot metering circle looks sharp in the viewfinder. • The diagram shows the knob set at the standard diopter (-1 dpt).
Film ID Imprinting o Be sure to set the user-settable No. before loading the film. The film ID is imprinted automatically as it advances to frame 1 after loading. You cannot set the user-settable No. once the film has been loaded. You also cannot set the film roll No. I □ _Q.0_0 O.O.O □ □ □ □ □ □ O O O \ User-settable No. I Film roll No. ca Dn, Imprinting position-! 0 □’□■Q 0 □ooooooo Press the < M.Fn > button to set the film ID setting mode.
Film ID Imprinting Press the shutter button halfway. ► The LCD panel will return to the normal display and the user-settable No. will be set. When the film is loaded, the ID icon will be displayed on the LCD panel while the film ID is being imprinted, (^p.26) o •In low temperatures (-10°C), the liquid crystal used for imprinting the film ID will have a slower response. Therefore, it may take a few seconds for the imprinting to be completed.
Loading and Unloading Film On the inside of the camera back, there is a protective plastic sheet. Be sure to remove it before loading film. Shutter curtain Plastic protector The shutter curtains have been manufactured at very high precision. Never touch them with your fingers. When loading film, do not touch or damage the curtains with your fingers or film. Loading Film Open the camera back.
Loading and Unloading Film Right Pull the edge of the film leader to the orange mark on the camera. • Hold down the film cartridge while pulling out the film leader. • If the edge of the film leader goes beyond the orange mark, rewind some of the film back into the cartridge. Wrong Close the camera back. • After checking that the film leader edge is correctly aligned with the orange mark, close the camera back. ► The film will advance to frame 1 automatically.
Loading and Unloading Film • If the film is not loaded properly, the film transport indicator will blink ^ In hot and humid environments, do not remove the film packaging until you are ready to load the film. The frame counter can either count up or count down. (C.Fn-8-1^p.103) Setting the Film Speed The camera sets the film speed automatically within ISO 25 - 5000 with the film's DX code.
Loading and Unloading Film Unloading Film After the film's last frame is exposed, the camera rewinds the film automatically. When the film starts to rewind, the film advance and rewind indicator on the LCD panel will “flow” from right to left to indicate that the film is rewinding. The frame counter also counts in reverse. The film rewind ends automatically. Check that the <(§L> icon on the LCD panel is blinking, then remove the film cartridge.
For quick and easy picture-taking, use the Program AE mode. This mode sets both the shutter speed and aperture automatically to suit the subject's brightness. Anyone can easily take pictures in this mode. By using the large Area AF ellipse in the viewfinder, it is easy to frame and capture a variety of subjects. Quick Start With Program AE First set the < © > switch to < ON >. '-w The Program AE mode is set automatically as the camera's initial shooting mode. (-^p.
Quick Start with Program AE Select
on the LCD panel. • While pressing the button, turn the <^S^ > dial to select . Then release the button. Focusing point In-focus indicator Area AF ellipse Focus the subject. • Look through the viewfinder and aim the Area AF ellipse over the subject. Then press the shutter button halfway. ► The focusing point which achieves focus flashes briefly. At the same time, the green in-focus indicator in the viewfinder is displayed.
Quick Start with Program AE Make sure the exposure setting is not blinking, then press the shutter button completely to take the picture. Exposure Warnings \ \ / X* \\// o n n n uuuucc jtzt '' I \ '^ If the shutter speed or aperture blinks, it means a correct exposure cannot be obtained. Although the picture can be taken, it may come out too bright or too dark. For details, see “Exposure Warning List” on page 124. The focusing point which achieves focus flashes briefly.
Holding the Camera To obtain sharp pictures, hold the camera still to minimize camera shake. Horizontal shooting Vertical shooting Firmly grasp the camera grip with your right hand, and press your right elbow lightly against your body. Hold the lens at the bottom with your left hand. Press the camera against your face and look through the viewfinder. To maintain a stable stance, place one foot in front of the other instead of lining up both feet.
The Area AF ellipse has 45 focusing points. By selecting the optimum focusing point, autofocusing can be executed while you maintain the desired subject framing. You can also set the AF mode to suit the subject or intended effect. iB Using Autofocus (AF) First set the < © > switch and < switch to .
AF Mode Selection AF stands for ‘autofocus’. The camera has two AF modes; One-Shot AF for still subjects, and Al Servo AF for moving subjects. (Al is an abbreviation for Artificial Intelligence.) Select the AF mode that suits the subject. Set the lens focus mode switch to AF. 's Set the AF mode. • While pressing the camera’s < af> button, turn the dial until the desired AF mode is displayed on the LCD panel. Then release the < af > button.
AF Mode Selection One-Shot AF for Still Subjects In-focus indicator ---------- Focusing point Pressing the shutter button halfway activates AF operation and achieves focus once. ► The focusing point which achieves focus flashes briefly and the in-focus indicator (•) in the viewfinder lights at the same time. • With evaluative metering, the exposure setting (shutter speed and aperture) will be set when focus is achieved.
AF Mode Selection Al Servo AF for Moving Subjects While you press the shutter button halfway, the camera focuses continuously. • This AF mode suits moving subjects when the focusing distance keeps changing. • With predictive AF*, the camera can also focus track a subject which steadily approaches or retreats from the camera. • The exposure settings are set immediately before the picture is taken.
Area AF Ellipse and Focusing Points The Area AF ellipse is the area where the camera can focus the subject. The Area AF ellipse has 45 focusing points, making autofocus possible over a wide area in the viewfinder. You can concentrate on composing th picture without worrying about whether a focusing point is covering the subject. As long as the subject is within the Area AF ellipse, the camera v focus the subject automatically.
Focusing Point Selection The focusing point can be selected automatically or manually. • Automatic Selection From among the 45 focusing points, the camera selects the focusing point automatically to suit the subject. • Manual Selection (One of three groups of selectable focusing points can be used) (1) You can select one of the 45 focusing points manually. (2) You can select one of eleven focusing points (C.Fn 13-1/2) (3) You can select one of nine focusing points (C.Fn 13-3) • C.Fn-13 enables (2) and (3).
Focusing Point Selection Automatic Selection Press the button and turn the dial. ► Turn the dial until the viewfinder display is as shown on the left. You can also turn the <0> dial. • While in the manual selection mode, shifting the focusing point beyond the peripheral focusing point will set the automatic selection mode. The automatic selection mode can also be set while C.Fn-13-1/2/3 has been set.
Focusing Point Selection (2) Manual selection limited to 11 focusing points (-^p.106) Since the selectable focusing points are limited to 11, you can better concentrate on framing the subject. Although you select the focusing point in the same way as with the 45 focusing points, having fewer selectable focusing points makes it faster to select a focusing point. (^p.106) □ □ □ ---- \ □( )D Y..___ □ □ □ • You can select one of 11 focusing points.
Focusing Point Selection Selecting the center focusing point • Press the <(!]> button and press the button. ► The center focusing point will be selected. When you select spot metering, it will be linked to the selected focusing point. (->p.52) I 33 With C.Fn-18, you can select the center focusing point by pressing (and releasing) or holding down the <^> button. (-^p.109) The manual selection method can be altered as follows: (1) C.Fn-11-1 gives the < 1^> button the function of the <013 > button.
Focusing Point Registration and Switching By registering the focusing point you often use, you can switch to it instantly. You can register an off-center focusing point which suits your preferred framing or the picture-taking moment. Any of the 45 focusing points can be registered. Only one focusing point can be registered. Registering a Focusing Point Press the button which remains active for (^ 6 ) . Then turn the or <0> dial to select the focusing point to be registered.
Focusing Point Registration and Switching A focusing point can be registered even when C.Fn-13-1/2 has been set to limit the selectable focusing points to 11. (->p. 106) When C.Fn-13-3 has been used to limit the selectable focusing points to 9, a focusing point cannot be registered, (-^p. 106) “SEL” stands for Select, and “HP” stands for “Home Position.” Switching to the Registered Focusing Point Normally, you press the button and button simultaneously to switch to the registered focusing point.
Focusing Point Activation Area C.Fn-17 C.Fn-17 can be set to expand the focusing point's activation area to include more than one active focusing point, (-^p.108) • C.Fn-17-1 Expanding the activation area to 7 points Hp.108) C.Fn-17-1 This larger activation area makes it easier to focus subjects moving irregularly. I : Selected focusing point. The expanded focusing point activation area is not displayed in the viewfinder.
Focusing an Off-Center Subject To focus a subject not covered by the Area AF ellipse, follow the procedure below. This technique is called focus lock. • Focus lock works only in the One-Shot AF mode, (-^p.35) Aim the focusing point on the subject and press the shutter button halfway to focus. rr::-1 W- ÂI Keep pressing the shutter button halfway and recompose the picture as desired. Take the picture.
Focusing an Off-Center Subject ^ AF Sensitivity According to the Lens' Maximum Aperture The EOS-1 Vs focusing points are all horizontal-line sensitive. However, depending on the maximum aperture of the lens, certain focusing points can achieve higher AF precision. □ □ □ CFUCl□□□ □□□□□□□ □ □□CTCrMDDD □ □□M-MDDD □□□□□□□ (1) With lenses whose maximum aperture is f/2.8 or larger, the focusing points highlighted in the figure become cross-type sensors sensitive to both vertical and horizontai lines.
Focusing an Off-Center Subject (3) With the following Extenders and L-series lenses whose maximum aperture is brighter than f/8, the center focusing point will be sensitive to horizontal lines only. The other focusing points cannot be used for AF. • With Extender EF 1.4x: • EF 400mm f/5.6L USM • EF 500mm f/4.5L USM • EF 100-400mm f/4.5-5.6L IS USM • With Extender EF 2.
When Autofocus Fails (Manual Focusing) Manual Focusing Set the lens focus mode switch to MF (or M on older lenses). • The AF mode indicator on the LCD panel turns off. Focus by turning the lens focusing ring until the subject is in focus in the viewfinder. Select the desired focusing point and press the shutter button halfway while manual focusing. When focus is achieved, the selected focusing point will flash and the in-focus indicator will light.
Evaluative, partial, spot, and centerweighted averaging metering modes are provided. Center spot metering, focusing point-linked spot metering, and multi-spot metering can also be set. Select the metering mode that suits the subject or your photographic intention. Evaluative metering Partial metering [V] Spot metering (ZZ! Centerweighted averaging metering Metering Modes First set the < © > switch to < ON >.
Selecting a Metering Mode While pressing the <®> button, turn the dial until the desired metering mode icon appears. ® Evaluative ® Partial H Spot IIIl Centerweighted averaging Release the <{M1> button.
Metering Modes Evaluative Metering This is an all-around metering mode suited even for backlit subjects. The viewfinder is divided into 21 metering zones to which all the focusing points are linked for evaluative metering. After detecting the main subject’s size, position, brightness, background, front and back lighting, etc., the camera sets the proper exposure. • During manual focusing, evaluative metering is based on the center focusing point.
Metering Modes CD Centerweighted Averaging Metering The metering is weighted at the center and then averaged for the entire scene. Focusing Point-Linked Spot Metering To make focusing point selection faster, the selectable focusing points can be limited to 11 (C.Fn-13-1) or 9 (C.Fn-13-3). When C.Fn-13-1 or C.Fn13-3 has been set, the manuallyselected focusing point is linked to 2.4% spot metering. (->p.
Metering Modes Multi-Spot Metering Multiple spot meter readings can be taken and then averaged automatically. As shown in the sample below, you can take multiple spot meter readings. PI Set the spot metering mode. (->p.50) Aim the focusing point over the shadow area and press the < pel > button. ► This obtains the first spot meter reading. Aim the focusing point over a midtone area and press the < fel > button once. Then do the same for a highlight area.
Metering Modes Multi-Spot Metering Display Fixed metering mark for the first spot meter reading Exposure level indicator (moving) before the second spot meter reading is taken. • This indicator shows the exposure level relative to the first spot meter reading. Exposure level indicator (moving) before the third spot meter reading is taken. • This indicator shows the exposure level relative to the second spot meter reading. Exposure setting after the second spot meter reading is taken.
You can set the shooting mode that best suits the subject or your objective. You can also easily achieve various photographic effects. M : Manual H65)------------------------Tv ; Shutter speed-priority AE (-^56) DEP : Depth-of-field AE (->61) Av : Aperture-priority AE bulb (^76) Multiple exposures (-^74) AEB (->69) Film advance (^77) (^58) self-timer (->79) I Exposure compensation (->67) Shooting Modes ■ I First set the < © > switch to < ON >. If necessary, also set the < ^ > switch to .
Tm Shutter Speed-Priority AE In this mode, you set the desired shutter speed and the camera sets the aperture automatically to suit the subject brightness. A fast shutter speed can freeze motion, and a slow shutter speed can achieve a blurred effect. * Tv is an abbreviation for Time value. With a fast shutter speed With a slow shutter speed While pressing the < m o d e > button, turn the dial until Ta appears on the LCD panel. Then release the < mode > button.
Tv Shutter Speed-Priority AE Press the shutter button halfway and focus the subject. ► The shutter speed and aperture will be displayed. Inc I C _• cc J.O Take the picture. • As long as the aperture display is not blinking, a correct exposure will be obtained. Exposure Warnings • If the lens’ maximum aperture (smallest f-number like f/1.4) blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture display stops blinking. n i.-. I* C t u >___“ I.
Av Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to suit the subject brightness. The larger the aperture (smaller f-number) the more blurred the background will become. This effect is suited for portraits. The smaller the aperture (larger f-number), the clearer the focus will be for both near and far objects. * Av is an abbreviation for Aperture value.
Av Aperture-Priority AE Turn the dial to set the desired aperture. Press the shutter button halfway and focus the subject. ► The shutter speed and aperture will be displayed. Take the picture. • As long as the shutter speed is not blinking, a correct exposure will be obtained. • If the shutter speed is slower than the reciprocal of the lens focal length (i.e. 1/200 for a 200mm lens), camera shake may cause a blurred picture.
Av Aperture-Priority AE Exposure Warnings • If the 30” shutter speed blinks, it indicates underexposure. Turn the > dial to set a larger aperture (smaller fnumber) until the shutter speed stops blinking. z< n M c c j u Zi.o If the 8000 shutter speed blinks, it indicates overexposure. Turn the < > dial to set a smaller aperture (larger f-number) until the shutter speed stops blinking. C.Fn-16 enables the safety shift feature. (->p.
DEP Depth-of-field AE This mode is effective when you want a wide depth of field to keep everything in focus near and far. The optimum point of focus and aperture to attain the required depth of field are set automatically along with the shutter speed. • To use this mode, the lens focus mode switch must be set to AF. While pressing the button, turn the < > dial until DEP appears on the LCD panel. Then release the button.
DEP Depth-of-field AE Aim the selected focusing point at the nearest subject you want in focus, then press the shutter button. (66) ► The in-focus indicator lights and dEP ! is displayed. • If two focusing points are active (-^p.43), both focusing points will be used for depth-of-field AE. Use the same focusing point to aim at the farthest subject you want in focus and press the shutter button. (66) ► The in-focus indicator lights and dEP d is displayed. • You can also reverse the above two steps.
DEP Depth-of-field AE Exposure Warnings • If the aperture blinks, the desired depth of field cannot be obtained. (However, you can still take the picture and obtain a proper exposure.) Use a wide-angle lens or move away from the subject and repeat steps 3 to 5. If the 30” shutter speed and the lens’ maximum aperture (smallest f-number) blink, the scene is too dark and the picture cannot be taken in the depth-of-field AE mode.
DEP Depth-of-field AE With automatic focusing point selection in the depth-of-field AE mode, only the center focusing point will be used for focusing. If a slow shutter speed has been set, use a tripod to prevent camera shake. If six seconds elapse before you complete the DEP procedure, the DEP point(s) set so far will be canceled. In such a case, you must start over again. To cancel the depth-of-field AE mode midway, press the button, < AF > button, or < ® > button. .
M Manual Exposure In this mode, you set both the shutter speed and aperture for total exposure control. You can refer to the exposure level indicator in the viewfinder or use a handheld exposure meter to determine the shutter speed and aperture. Using the Built-in Exposure Meter While pressing the button, turn the dial until M appears on the LCD panel. Then release the button. Set the < ^ > switch to < on >. Turn the dial to set the shutter speed and turn the <0> dial to set the aperture.
M Manual Exposure Focus the subject. ► The shutter speed and aperture will be displayed. • On the right of the viewfinder, the exposure level indicator indicates the current exposure level relative to the correct exposure index. Exposure level indicator Correct exposure index Refer to the exposure level indicator and set the shutter speed and aperture to obtain the desired exposure level. Take the picture. C.Fn-5 can reverse the functions of the dial and dial. (^p.101) C.
Setting Exposure Compensation Exposure compensation is used to alter the camera’s standard exposure setting. To set the exposure compensation amount, you can either turn the <0> dial while looking through the viewfinder or press the < > button and turn the < ¿Si?. > dial while looking at the LCD panel. The exposure compensation amount can be set up to ±3 stops in 1/3-stop increments. Exposure Compensation with the <0> Dial Set the < ^ > switch to < on >. Focus the subject and check the exposure level.
Setting Exposure Compensation Custom Function C.Fn-6-2 enables the exposure compensation amount to be set in 1/2-stop increments. (^p.102) The exposure compensation amount’s 1/2-stop increments enabled with C.Fn-6 are indicated in the viewfinder and on the LCD panel as shown below. -1 1/2 exposure compensation Exposure Compensation with the < > Button and < ¿a > Dial Press the < t ^ > button and turn < > dial within ((S6) to set the desired exposure compensation amount.
Autoexposure Bracketing With autoexposure bracketing, the camera automatically changes the exposure level within the set range (up to ±3 stops in 1/3-stop increments) for three successive frames. The three bracketed shots are exposed in the following sequence: correct exposure, underexposure, and overexposure. The current film advance mode (see “Switching the Film Advance Mode” on page 77) is used during the bracketing.
Autoexposure Bracketing Take the pictures. Display for ±1 -stop AEB. • The current film advance mode will be used. ► The viewfinder’s exposure level scale will show the respective bracketing amount as each bracketed shot is taken. • In the continuous shooting mode, holding down the shutter button will take all three bracketed shots continuously. The shooting will then stop automatically.
AE Lock C.Fn-6-2 enables the AEB amount to be set in 1/2-stop increments. (->p.102) C.Fn-9-2/3 can change the bracketing sequence to underexposure, correct exposure, and overexposure. (->p.104) C.Fn-9-1/3 can prevent AEB from being canceled by changing lenses, rewinding the film, replacing the film, and setting the <©> switch to < O F F > . Hp.104) C.Fn-5-1 can have the aperture change instead of the shutter speed during AEB in the manual exposure mode. (-^p.
AE Lock Recompose the shot and take the picture. • When the shot is recomposed, the exposure level indicator will show the new exposure level in real-time relative to the locked exposure level. AE lock exposure level AE lock indicator Real-time exposure level -W' Partial or spot metering is recommended for AE lock over a specific point. (->p.51) |j If One-Shot AF and evaluative metering are set, pressing the shutter button halfway to focus will automatically set AE lock at the same time. C.
Setting the Film Speed Manually If the film is not DX-coded or if you want to set a different ISO film speed, you can load the film and set the ISO film speed manually. • The ISO film speed can be set manually from 6 to 6400. Press and hold down the < af> button and button simultaneously. ► The ISO icon and the currently-set film speed will be displayed.
@] Multiple Exposure By not advancing the film, a single frame can be exposed multiple times. Up to nine multiple exposures can be set for one frame. Multiple exposures can be taken in any shooting mode. Open the side door and press the button. ► The <® > icon appears on the LCD panel and the frame counter displays 11 f ’) (■ Turn the < ¿Si > dial to set the desired number of multiple exposures.
0 Multiple Exposures (I If any of the film’s first or last few frames is used for multiple exposures, the exposures may not align exactly due to film advance characteristics. II • While multiple exposures are being taken, the multiple exposure icon < 0> blinks. •To cancel the multiple exposure setting before taking multiple exposures, set the number of multiple exposures to 1.
Bulb Exposures When bulb is set, the film is exposed during the time you keep pressing the shutter button completely. Bulb is useful when a long exposure is necessary for capturing night scenes, fireworks, the night sky, etc. While pressing the < m o d e > button, turn the dial until tfuLb Is displayed. Then release the < M O D E > button. Set the <^> switch to , then turn the (or <0>) dial to set the desired aperture. Start the bulb exposure.
Single-Frame and Continuous Shooting The film advance mode can be set to single-frame shooting or continuous shooting. Single-frame Shooting < □ > After a picture is taken, the film advances by one frame automatically. Continuous Shooting The pictures are taken continuously while you hold down the shutter button completely. Press the < m o d e > button and <[®]> button simultaneously. ► The current film advance mode is displayed. Turn t h e < £ ^ > dial to set the desired film advance mode.
Single-Frame and Continuous Shooting When □, Q|, O i l , Q!|H,or Qi|H« Blinks If the battery power drops in cold temperatures or the film advance operation becomes slow, it means that the camera is trying to provide film advance power rather than speed. This feature is called automatic film advance transmission. If this is activated, one of the film advance icons (□, Oil, Sl, will blink on the LCD panel.
Self-timer Operation The self-timer can be set to either a 2-second or 10-second delay. When using the self-timer, you should mount the camera on a tripod. While pressing the < m o d e > button and <[U> button, turn the < ¿Si > dial and set the desired self-timer delay time. .10 Ci) 10-second delay 02; 2-second delay Look through the viewfinder and press the shutter button halfway to focus. • Check that the in-focus indicator and exposure setting are displayed. Press the shutter button completely.
Depth-of-field Preview Using the Eyepiece Shutter If you take a picture without looking through the viewfinder, stray light may enter the eyepiece and affect the exposure. To prevent this, use the built-in eyepiece shutter before taking the picture. To cover the eyepiece with the eyepiece shutter, turn the lever as shown by the arrow. To open the eyepiece shutter, turn the lever in the opposite direction.
Mirror Lockup Mirror lockup is enabled with C.Fn-12 (^p.106). This prevents mirrorcaused vibrations which may blur the image during close-ups or when a super telephoto lens is used. To set this Custom Function, see “Selecting and Setting a Custom Functions” on page 96. When mirror lockup is set, the camera operates as follows. • When using mirror lockup. Remote Switch RS-80N3 (sold separately) is recommended. Press the shutter button completely.
LCD Panel Illumination The LCD panel is provided with illumination. The LCD panel illumination button turns the illumination on (^6) and off. It makes the LCD panel readable in darkness. The LCD panel illumination turns off 2 seconds after a picture is taken. For a bulb exposure, the illumination turns off when the bulb exposure starts. Ul Pressing any button while the LCD panel is illuminated prolongs the illumination.
An EOS-dedicated EX-series or EZseries Speedlite makes flash photography as easy as any AE mode. EX-series Speedlites enable E-TTL autoflash photography as well as E-TTL wireless autoflash photography with multiple Speedlites. Speedlite 550EX will be used to describe the flash photography features provided with the EOS-1 V. For details on Speedlite 550EX, see the Instructions booklet that comes with it. Flash Photography OFF First set the < © > switch to < ON >.
Flash Photography with Speedlite 550EX With Speedlite 550EX, flash photography is easy as any AE mode, and you can use the following features: • E-TTL autoflash With E-TTL autoflash (preflash evaluative metering), optimum flash exposure is obtained for the subject in focus. In the aperture-priority AE mode, a slow sync speed is set automatically in low-light situations to obtain a natural-looking, balanced exposure between the subject and background.
Flash Photography with Speedlite 550EX Full Auto Flash Full Auto E-TTL autoflash used with the
Program AE mode is described here. For details on Speedlite 550EX operations, see the Speedlite 550EX Instructions booklet. Set the camera’s shooting mode to p. Check that the SSOEX’s pilot lamp is lit. Focus the subject. Take the picture. • Make sure the flash-ready indicator i is on, and check the shutter speed and aperture before taking the picture.
Flash Photography with Speedlite 550EX High-Speed Sync (FP Flash) When the Speedlite 550EX is set to the high-speed sync mode (EB), it can synchronize at all shutter speeds, even those faster than 1/250 sec. When high-speed sync is enabled, Vh is displayed in the viewfinder to indicate high-speed sync. High-speed sync is effective in the following cases: (1) When you want to use fill flash for a portrait and maintain background blur with a large aperture.
Flash Photography with Speedlite 550EX FE Lock FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of the scene. Check that the Speedlite’s pilot lamp is lit. • The flash mode can be either normal or high-speed sync. FE lock works with either mode. Focus the subject. • Focus at the point where you want to lock the flash exposure. Aim the spot metering circle over the part where you want to lock the flash exposure, then press the < PEL > button 6).
Flash Photography with Speedlite 550EX Below the viewfinder, the display shown by © appears for 0.5 sec. followed by the display shown by (2). 4 !гs s.B Compose the shot and take the picture. For this picture, the flash exposure was locked for the face and then the picture was recomposed. The subject was exposed correctly without being affected by the background reflection. ^ If the subject is too far away resulting in underexposure, the J icon will blink.
Flash Photography with Speedlite 550EX Flash Exposure Compensation With the camera, you can set the EOS-dedicated Speedlite’s flash exposure compensation amount up to ±3 stops in 1/3-stop increments. While pressing the <®> button, turn the <0> dial to set the desired flash exposure compensation amount. • On the LCD panel, the plus side of the scale indicates overexposure and the minus side indicates underexposure. The sample display shows +2/3 stop flash exposure compensation. Take the picture.
Flash Photography with Speedlite 550EX FEB (Flash Exposure Bracketing) With the Canon Speedlite 550EX, three successive flash shots can be bracketed automatically up to ±3 stops in 1/3-stop increments. The flash output is changed for the three shots while the background exposure remains the same. Correct exposure (0). Underexposure (-1/3 stop). Overexposure (-1-1/3 stop). • Flash exposure bracketing is set with the 550EX. For details, see the 550EX’s Instructions booklet.
Flash Photography with Speedlite 550EX Modeling Flash By firing a modeling flash, you can see the shadows and other flash lighting effects produced by one or more Speedlites. Make sure the camera and Speedlite are properly set for flash photography. Press the camera’s depth-of-field preview button. ► The Speedlite 550EX fires at 70 Hz for 1 second.
Flash Photography with Speedlite 550EX Wireless, Multi-Speedlite System Speedlite 550EX has the following three features: (1) E-TTL autoflash (2) Slave unit feature (3) Master unit feature for wireless control of 550EX slave units By using the above features, you can set up a wireless E-TTL autoflash system with multiple Speedlite 550EXs. You can also set a flash output ratio for up to three groups of Speedlites to create the desired flash lighting effect.
Using Other EOS-Dedicated Speedlites With an EOS-dedicated Speedlite other than the EX series, TTL autoflash can be easily used like any AE mode. The flash exposure is controlled by real-time, off-the-film flash metering linked to the focusing point. (1)When you press the shutter button halfway, the shutter speed and aperture are set automatically by the camera as with normal picture-taking without flash. Mode p (Program AE) Shutter Speed Setting Flash Aperture Setting Auto (1/60 sec. - 1/250 sec.
Using Non-Canon Flash Units Sync Speed The EOS-1 V can synchronize with compact, non-Canon flash units at 1/250 sec. or slower shutter speeds. With large studio flash, the sync speed is 1/125 sec. or slower. Be sure to test the flash to see if it synchronizes properly with the camera. PC Terminal The camera’s PC terminal is provided for flash units using a sync cord. The PC terminal is threaded to prevent inadvertent disconnection. Only X-sync is used for synchronization at 1/250 sec. or slower.
INCORPORATING OLDTIMER CAMERAS OTC Ltd, 24 Market Place, Hatfield, Herts, AL10 OLN Tel: 01707 273773 Fax: 01707 273774 Email: sales@otcworld.co.uk www.otcworld.co.
Canon EOS-1 □ HS Englisli Edition ■ INSTRUCTIONS
Custom Functions enable you to customize various camera features to suit your picture-taking preferences. In the previous text, the RCT symbol was used to point out relevant Custom Functions. In this chapter, all the Custom Functions are described in detail. C.Fn-0 C.Fn-1 C.Fn-2 C.Fn-3 C.Fn-4 C.Fn-6 C.Fn-7 C.Fn-8 C.Fri-9 —98 -■98 —99 —99 "100 "101 "102 "102 "103 "104 C.Fn-11 G.Fn-12 C.Fn-14 C.Fn-16 C.
Selecting and Setting a Custom Functions Open the side door and press the button. ► The Custom Function No. appears on the LCD panel. Turn the dial until the desired Custom Function No. appears. Press the button to change the Custom Function’s setting. Custom Function No. Custom Function setting -Altered Custom Function indicator on exposure compensation scale -3- -2. .-1. .CP. .+1. +2. .+3 ► The Custom Function setting changes each time you press the button. • To change C.
Canceling a Custom Function Open the side door and press the button. ► The Custom Function No. appears on the LCD panel. Turn the dial until the Custom Function No. whose setting is to be canceled appears. Press the button until the setting returns to [I. Press the shutter button halfway. ► The LCD panel returns to the normal display and the Custom Function setting is canceled. Open the side door and press the button. Then press the < CLEAR > button. • Except for C.
Custom Function Settings C.Fn-0 Focusing screen characteristics This makes the camera’s built-in exposure meter compatible with the focusing screen characteristics. Be sure to set this Custom Function to suit the focusing screen installed in the camera. (^p.127) C.Fn Function Focusing screen C.Fn-0 characteristics No. 0 w 1 Description For Ec-N, Ec-R For Ec-A,B,C,CII,CIII,D,H,I,L C.Fn-0-0; For New Laser-matte screens. C.Fn-0-1 ; For Laser-matte screens.
Custom Function Settings C.Fn-2 Film leader position When the film rewind is completed, you can leave out the film leader. C.Fn Function No. 0 C.Fn-2 Film leader position 1 u l^ Description Rewinds film leader into the cartridge. Leaves film leader outside the cartridge. C.Fn-2-1; This is convenient if you develop your own film. Q With C.Fn-2-1 set, the shutter speed will always be 1/8000 sec. when you release the shutter with the camera back open. ______ C.
Custom Function Settings C.Fn-4 AF activation/AE lock You can achieve focus and obtain the correct exposure separately. You can also stop the Al Servo AF operation temporarily. C.Fn Function AF activation/ C.Fn-4 AE lock • : Shutter button • ; AE lock button No. Description 0 •AF •AEL Shutter button/AE lock button 1 •AEL •AEAF AE lock button/Shutter button 2 •AF •AFL •AE Shutter button/Disabled (AF lock) AE lock button/Disabled (-^Real-time AE) 3 •AEAF C.
Custom Function Settings Manual Tv/Av settings During manual exposures, you can change the aperture with the dial and set the aperture even while the lens is detached from the camera. C.Fn Function No. 0 Manual Tv/Av setting 1 C.
Custom Function Settings C.Fn-6 Exposure level Increments You can change the increments for the exposure setting (shutter speed and aperture) and exposure compensation (AE, AEB, flash exposure). C.Fn No. Function Increments for the exposure setting (shutter speed/ C.
Custom Function Settings When both C.Fn-4 and C.Fn-7 are set, electronic manual focusing will be enabled or disabled as follows: Custom Function No. Setting 0 C.Fn-7 1 2 C.Fn-4 0,2 X/0 X/X X/X 1,3 0/0 0/X X/X * Before focus is achieved/After focus is achieved O: Enabled X: Disabled CFn-^ Frame counter sequence The frame counter can count down to show the remaining number of frames, or it can be displayed in the viewfinder in the same way as with the EOS-1 N. C.Fn C.
Custom Function Settings _______ C.Fn-9 AEB sequence and auto cancellation You can alter the standard AEB sequence of correct exposure, underexposure, and overexposure and prevent AEB cancellation after changing the lens, reloading film, or turning off the Main Switch. O: Correct exposure Underexposure +: Overexposure C.Fn Function No. Description + 0 O, -, + / Enabled AEB sequence/Auto cancellation after C.Fn-9 lens change, film loading, or Main Switch OFF 0 1 & + 0 2 3 C.Fn-9-1 C.Fn-9-2 C.
Custom Function Settings C.Fn-11 Focusing point selection method This converts the < t ^ > button or < > button into the
- button. You can thereby position the focusing point selector according to your personal preference. The <0> dial can also be used to select a horizontal or vertical focusing point. fel C.Fn Function No. 0 C.
Custom Function Settings C.Fn-12 ¡Viirror lockup C.Fn Function No. Description 0 Disabled 1 Enabled C.Fn-12 Mirror lockup C.Fn-12-1 : Effective for close-up and telephoto shots to prevent camera vibration caused by the mirror’s reflex action. See page 81 to use this feature. C.Fn-13 Focusing point selection limit and spot metering linkage The selectable focusing points can be limited to 11 or 9 to make focusing point selection faster. Spot metering can also be linked to the focusing point.
Custom Function Settings Any metering mode besides spot metering can be used. With C.Fn-13-1/2/3, all 45 focusing points will be subject to automatic selection. C.Fn-14 Automatic reduction of fill flash output C.Fn Function Automatic reduction C.Fn-14 of fill flash output Description No. 0 Enabled OTrfTTi 1 Disabled C.Fn-14-1: This prevents underexposure of a subject in front of a strong backlight such as a sunset. C.Fn-15 Shutter curtain synchronization C.Fn Function Shutter curtain C.
Custom Function Settings Safety shift Safety shift can be set for the shutter speed-priority AE and aperturepriority AE modes. C.Fn Function Safety shift for TvC.Fn-16 AE and Av-AE No. 0 1 (§) ss Description Disabled Enabled C.Fn-16-1; In case the subject’s brightness changes suddenly and the current shutter speed-priority AE or aperture-priority AE setting becomes unsuitable, the shutter speed or aperture is shifted to obtain a suitable exposure. C.
Custom Function Settings iJ The focusing point activation area centers on the selected focusing point. Therefore, if a peripheral focusing point is selected, the focusing point activation area will be smaller as shown below. 7-point activation area Selected focusing point I Activation area 13-point activation area C.Fn-18 Switchover to registered focusing point You can switch to the registered focusing point just by pressing the button, (-^p.42) C.Fn Function No. 0 Switchover to C.
Custom Function Settings C.Fn-19 Lens AF stop button function switching The function of the AF stop button provided with super telephoto Image Stabilizer lenses can be shifted to the AF start button or AE lock button. C.Fn C.Fn-19 Function Lens AF stop button function switching No.
Personal Functions Personal Functions enable you to further customize your camera settings. They are set with EOS LINK SOFTWARE ES-E1 (sold separately, ^p.130) which connects the EOS-1 V to a personal computer. P.Fn-0 (Custom Function group registration) can be set with the EOS-1 V body as well. Personal Functions P.Fn-0 Custom Function group registration. P.Fn-1 Disables unwanted picture-taking mode(s). P.Fn-2 Disables unwanted metering mode(s). P.
I Custom Function Group To suit various shooting situations such as sports, snapshots, and landscapes, up to three different sets of Custom Function settings can be registered with the “Personal Function 0” setting. Custom Function Group Registration Set all the preferred Custom Function settings, (-^p.96) Press the button to set the Personal Function mode. • Each time you press the button, one of the three icons on the left side of the LCD panel will appear in turn.
Custom Function Group Press the button to register the Custom Function settings as a group. • C.Fn-1 to C.Fn-19 will be registered as one set of Custom Function settings. Press the shutter button halfway. PF icon ► The LCD panel returns to the normal display and this completes the Custom Function group registration. When the registered Custom Function group is being used, the # icon is displayed on the LCD panel. • To register a Custom Function group for PF-0-2 and PF-0-3, repeat steps 1 to 5.
Recording the Shooting Data The EOS-1 V can record the shooting data automatically. The recorded data can be viewed and edited with a personal computer by using EOS LINK SOFTWARE ES-E1 (sold separately). Standard Shooting Data Optional Shooting Data Recordable with EOS LINK SOFTWARE ES-E1 1. Selectable No. 1. Bulb exposure time 2. Film ID 2. Date 3. Film-loaded date and time 3. Time 4. DX-coded film speed 4. Custom Function settings 5. Frame No. 5. Focusing point selection 6. Shooting mode 6.
The EOS-1 V HS attached with Power Drive Booster PB-E2 offers four film advance modes. The vertical grip also has its own shutter button, focusing point selector , Main Dial FE lock/multi-spot metering button < > , and AE lock button <*>. The camera is powered by eight size-AA batteries. The NickelHydride Pack NP-E2 and the dedicated Nickel-Hydride Charger NC-E2 (both sold separately) are also available. For better holding comfort, Handstrap El is also available.
For EOS-1 VHS Users Attachment screw Contacts Positioning pin Film advance coupler Gear train switching pin Attachment knob Battery magazine latch <^> Vertical-grip AE lock button <0ir)> Vertical-grip focusing point selector Battery magazine Vertical-grip shutter button ON/OFF switch Vertical-grip Main Dial Vertical-grip FE lock/ multi-spot button Tripod socket Hand Strap eyelet Remove the battery magazine. • Turn the battery magazine latch as shown by the arrow. Then pull out the magazine.
For EOS-1 VHS Users Film Advance Modes (^p.77) • Ultra-high speed continuous shooting With the Nickel-Hydride Pack NP-E2 attached (sold separately ->p.133), shoot up to about 10 frames per sec. while pressing the shutter button. • High-speed continuous shooting Shoot up to about 6 frames per sec. (or 7 fps with NP-E2) while pressing the shutter button. • Low-speed continuous shooting Shoot up to about 3 frames per sec. while pressing the shutter button.
For EOS-1 VHS Users Attaching Grip GR-E2 You can replace the Power Drive Booster PB-E2 with the normal Grip GRE2 (sold separately) found on the EOS-1 V. The GR-E2 uses one lithium 2CR5 battery. Install a battery in the Grip GR-E2. (-^p.19) • As shown in the diagram, insert the battery with the contacts toward the bottom right. Then close the cover. Detach the Power Drive Booster PB-E2. • Turn the Power Drive Booster PBE2’s attachment knob as shown by the arrow to loosen it. Then slide down the Booster.
This section helps you understand your camera and enjoy photography better. It gives reference information for your camera and introduces system accessories.
Basic Photography Terms Exposure Exposure occurs when the film is exposed to light. Correct exposure is obtained when the film is exposed to a proper amount of light in accordance with the film’s sensitivity to light. The correct exposure is adjusted with the camera’s shutter speed and aperture. Shutter speed The shutter speed is the length of time the camera’s shutter opens to expose the film to the light coming through the lens.
Basic Photography Terms This is the range where acceptable focus can be achieved in front of and behind the point of optimum focus. The smaller the aperture (the larger the f-number), the deeper the depth of field. And the larger the aperture (the smaller the f-number), the shallower the depth of field. The depth of field is affected as described below: (1) A smaller aperture (a larger f-number) increases the depth of field. For example, stopping down to f/8 obtains a greater depth of field than f/4.5.
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. If the problem still persists, take the camera to your nearest Canon Service Center. Canon Service Centers are listed on the back of this booklet. Nothing is displayed on the LCD panel. < © > is . ► Set the < © > switch to . (->p.14) The battery is exhausted. ► Replace the battery with a new one. (^p.19, 20) The battery has been installed incorrectly. ► Install the battery correctly. (^p.
Troubleshooting Guide The film does The temperature is cold, and it has suddenly affected the battery level. not rewind automatically. ► Replace with a new battery. (-^p.19) Keep a spare battery on hand and warm the battery in your pocket alternately. (->p.7) C.Fn-1 is set to 1 or 3. Set C.Fn-1 to 0 or 2. (^p.98) The < Q > icon blinks on the LCD panel. The battery level is very low. ► Replace the battery with a new one. (-^p.19) A misoperation has occurred with the camera, lens, or Power Drive Booster.
Exposure Warning List Mode Blinking Warning \^/\^/ /j\/ I Indication Countermeasures The subject is too dark. Use flash. The subject is too bright. Attach a neutral density filter to the lens. The picture will be underexposed. Turn the < > to set a slower shutter speed. The picture will be overexposed. Turn the < > to set a faster shutter speed. The picture will be underexposed. Turn the < > to set a larger aperture (smaller f-number). The picture will be overexposed.
Program Line The program line below applies when the camera is used in the Program AE < P > mode with an EF 50mm f/1.4 USM lens. Program Line Description The bottom horizontal axis represents the shutter speed and the right vertical axis represents the aperture. On the left edge and top edge of the graph, the Exposure Value (EV) is indicated for respective shutter speed and aperture combination set by the Program AE mode and denoted by the colored program line.
Shutter Speed and Aperture Readouts Shutter speed readout The shutter speed is normally displayed in 1/3-stop increments. Numbers from “4” to “8000” denote the denominator of the shutter speed fraction. For example, “125” is 1/125 sec. Also, 0"3 is 0.3 sec., and 15" is 15 sec. Aperture readout The aperture is normally displayed in 1/3-stop increments. The larger the number, the smaller the aperture opening. The range of aperture numbers (f-numbers) displayed depends on the lens used.
Interchanging the Focusing Screen You can interchange the camera’s focusing screen to suit the picture-taking application. You must also set C.Fn-0 so that the criteria for the correct exposure suits the focusing screen. Focusing Screen Type M : New Laser-matte Screen L ; Laser-matte Screen Designation C.Fn-0 Setting Ec-N, Ec-R Ec-series (A, B, C, Cll, Gill, D, H, I, L) 0 1 Open the side door and press the button. • The Custom Function No. appears.
Interchanging the Focusing Screen Ec-series Interchangeable Focusing Screens Ec-A: Standard microprism j~i-.. Compatible with all EF lenses. Lenses with a maximum aperture smaller than f/5.6 will cause the focusing screen’s microprism to darken. Ec-B: New split screen Compatible with all EF lenses. With slow lenses whose maximum aperture is smaller than f/5.6, the split-image circle may darken. Ec-CII: All Laser-matte _r-i EOS-1 N’s standard focusing screen.
Major Accessories • Power Drive Booster PB-E2 Together with the Ni-MH Pack NP-E2, Power Drive Booster PB-E2 enables a top continuous shooting speed of about 10 fps. The vertical grip has its own shutter button, Main Dial, AE lock button, FE lock button, and focusing point selector. It makes vertical shots as easy as horizontal shots, when equipped with Battery Magazine BM-E2, Power Drive Booster PB-E2 is also compatible with the EOS-1 N and EOS-1.
Major Accessories • Battery Pack BP-E1 The grip portion houses a 2CR5 lithium battery while the battery magazine holds four widely-available, size-AA alkaline batteries. You can switch between these two power sources to suit the shooting condition. The continuous shooting speed is the same as with the EOS-1 V. • EOS LINK SOFTWARE ES-E1 This enables the EOS-1 V to be connected to a persona! computer which can be used to further customize the EOS-1 V.
Major Accessories • EX-series Speedlites 550EX, 380EX, and 220EX Three EOS-dedicated E-TTL autoflash Speedlites are available. The 550EX for a large flash output, the 380EX for affordable performance, and the 220EX for compactness. Their respective Guide numbers (at ISO 100 in meters) are 55, 38, and 22. All three Speedlites enable E-TTL autoflash, high-speed sync (FP flash), and FE lock. With the 550EX, an easy-to-use wireless, multiSpeedlite system is possible.
Major Accessories • Date Back DB-E2 This is an interchangeable camera back for the EOS-1 V and EOS-3. It has a Quick Control Dial and date imprinting feature. The date can be imprinted on the photograph up to the year 2019. The following imprinting modes are provided: 1. Year, month, day, 2. Day, hour, minute, 3. Blank, 4. Month, day, year, and 5. Day, month, year. It cannot imprint the film ID. /- l-.V--. '..-'j ‘-I ■■'.
Major Accessories Remote Switch RS-80N3 Remote switch with an 80-cm cord to prevent camera shake for super telephoto shots, macrophotography, and bulb exposures. You can use the remote switch to press the shutter button halfway or completely. It also has a shutter release lock. Its quicklock plug connects to the EOS-1 V’s remote control/data transfer terminal. Extension Cord ET-1000N3 Ten-meter extension cord for connecting the EOS-1 V with Timer Remote Controller TC-80N3 or Remote Switch RS-80N3.
Major Specifications ® Type Type............................35mm AF/AE single-lens reflex with focal-plane shutter and builtin motor drive. Picture size.................. 24 mm x 36 mm Compatible lenses........Canon EF lenses Lens mount................. Canon EF mount • Viewfinder Type........................... Eye-level pentaprism Picture coverage.......... 100 percent vertically and horizontally (20 mm eye relief) Magnification............... 0.
Major Specifications program flash AE, (8) Manual, @ Bulb (Safety shift possible for 2 and 3.) Metering range............ EV 0-20 for all metering modes (at 20°C with 50mm f/1.4 lens, ISO 100) ISO film speed range....ISO 6-6400 (Set automatically with DX-coded film at ISO 255000.) Exposure compensation.(1) Autoexposure bracketing (AEB): ±3 stops in 1/3-stop increments.
Major Specifications AF focusing point indicator.......Superimposed focusing point in viewfinder and also indicated on LCD panel AF-assist beam.............Emitted automatically by the attached EOS Speedlite when necessary. • Shutter Type............................Vertical-travel, focal-plane shutter with all speeds electronicallycontrolled. Shutter speeds.............30 to 1/8000 sec. in 1/3-stops, X-sync at 1/250 sec. Shutter release............Soft-touch electromagnetic release Self-timer..............
Major Specifications to a personal computer for viewing and editing. Data recorded.............. See page 114. The data cannot be viewed or edited with the camera. Shooting data memory capacity........ With the standard number of data items, shooting data fo rolls of 36-ex. film can be stored. • Camera Specifications Flash contacts..............
Index Accessories.....................................129 AEB................................................. 69 AE lock............................................ 71 AF Modes......................................... 34 - selecting......................................34 Al Servo AF....................................36 One-Shot AF.................................. 35 aperture-priority AE.......................... 58 aperture setting..............................120 with shutter speed display............
Index infrared film, using........................... 82 LCD panel........................................ 10 LCD panel illumination...................... 82 lens - mounting.................................... 21 - detaching.................................... 21 manual exposure..................... 65 Main switch......................................14 manual exposure..............................65 manual focusing............................... 48 metering metering mode, selecting...............
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.
INCORPORATING OLDTIMER CAMERAS OTC Ltd, 24 Market Place, Hatfield, Herts, AL10 OLN Tel; 01707 273773 Fax: 01707 273774 Email: sales@otcworld.co.uk www.otcworld.co.
