Manual

Troubleshooting Guide
The film does
not rewind
automatically.
The temperature is cold, and it has suddenly affected the
battery level.
► Replace with a new battery. (-^p.19) Keep a spare battery
on hand and warm the battery in your pocket alternately.
(->p.7)
C.Fn-1 is set to 1 or 3.
Set C.Fn-1 to 0 or 2. (^p.98)
The < Q >
icon blinks
on the LCD
panel.
The battery level is very low.
► Replace the battery with a new one. (-^p.19)
A misoperation has occurred with the camera, lens, or
Power Drive Booster.
- Remove and reload the battery, (^p.19, 116) If the < 0 >
icon stops blinking, picture-taking is possible. If it is still
blinking, consult your nearest Canon Service Center.
123