Manual

Basic Operation

2. After pressing a button, turn the < > dial.

When a button is pressed, its function remains active for 6 or 16

seconds. You then look at the LCD panel and turn the < > dial during

this time. After the function turns off or when you press the shutter button

halfway again, the camera will be ready to take a picture.

Buttons which turn on for 6 or 16 seconds are indicated in this instruction

booklet with the following icons:

(66) ; The button's function remains active for 6 seconds after the

button is released.

(616) ; The button's function remains active for 16 seconds after the

button is released.

(2) turn the

3. Just turn the < > dial.

While looking at the LCD panel, you can set the shutter speed, aperture,

or another setting.