Manual

Basic Operation

There are three ways to use the <Q>:

1. While holding down a button, turn the <0> dial.

2. After pressing and releasing a button, turn the <©> dial.

3. Just turn the <0> dial.

Look at the LCD panel to confirm the setting.

To restore the button's function or to ready the camera for picture taking,

turn the dial.

The <0> is used to set the following:

1. Real-time exposure compensation

2. Aperture

3. Flash exposure compensation

4. Focusing point selection

<OFF> : Set to this position to disable the

<o>.

<ON>

Set to this position to enable the

<o>.

Reverting to the Default Settings

With the EOS-1 V, you can set the shooting mode, metering mode, and

other settings as you wish. You can also use Custom Functions (->p.95) to

customize camera controls and functions according to your preferences.

These preferences can be reset to the default settings with the following

procedure.