Manual

Installing the Battery and Checking the Battery Level

Installing the Battery

The battery is housed in the camera grip. Remove the grip to install one

2CR5 lithium battery.

• For the EOS-1 V FIS, see page 115.

Remove the grip.

• Use a coin to turn and loosen the grip

screw as shown by the arrow in the

figure. Slide off the grip downward.

Open the cover.

install the battery.

• Install the battery so that the battery

contacts are on the right and bottom.

Then close the cover.

Reattach the grip.

• Reattach the grip to the camera, then

turn the grip screw to tighten

securely.

V Lithium batteries may not be available in certain areas. Carry a spare battery

when going on a trip or when you will use many rolls of film.