Manual

Film ID Imprinting
o Be sure to set the user-settable No. before loading the film. The film ID is
imprinted automatically as it advances to frame 1 after loading. You cannot set
the user-settable No. once the film has been loaded. You also cannot set the
film roll No.
□ _Q.0_0 O.O.O □□□□□□OOO
I
\
User-settable No.
I
Film roll No.
ca
Dn,
Imprinting position-!
0 □’□■Q 0 □ooooooo
M.Fn: Multi Function. This
refers to the EOS-1 V’s
extended functions.
User-settable No.
Film roll No.
Press the < M.Fn > button to set the
film ID setting mode.
• Each time you press the button, the
following icons will be displayed in
turn on the left side of the LCD panel.
Display the ID icon. _
ID icon-
PF icon-
Data transfer icon -
fID
► The blinking number is the user-
settable No.
• After the film advances to frame 1,
the user-settable No. will be
displayed and it cannot be changed.
Turn the < > dial to set the
desired user-settable No.
• You can set any number from 00 to
o o
• The film roll No. is set sequentially
from 00 I to 00B. After 000, it will
start from 00 I again.
23