Manual

Focusing Point Selection

Selecting the center focusing

point

• Press the <(!]> button and press the

<B> button.

► The center focusing point will be

selected.

When you select spot metering, it will be linked to the selected focusing point.

(->p.52)

33 With C.Fn-18, you can select the center focusing point by pressing (and

releasing) or holding down the <^> button. (-^p.109)

The manual selection method can be altered as follows:

(1) C.Fn-11-1 gives the < 1^> button the function of the <013 > button.

(-^p.105)

(2) C.Fn-11-2 gives the < > button the function of the <Ei3> button. The

<Q> dial can also be used by itself. (->p.105)

(3) C.Fn-11-2 can switch manual focusing point selection to automatic

selection. (->p.105)

(4) C.Fn-11-3 gives the < PEL > button the function of the <Ei3> button.

(-^p.105)