Manual

Setting Exposure Compensation

Custom Function C.Fn-6-2 enables the exposure compensation amount to be

set in 1/2-stop increments. (^p.102)

The exposure compensation amount’s 1/2-stop increments enabled with C.Fn-6

are indicated in the viewfinder and on the LCD panel as shown below.

-1 1/2 exposure compensation

Exposure Compensation with the < > Button and < ¿a > Dial

Press the <t^> button and turn

< > dial within ((S6) to set the

desired exposure compensation

amount.

switch is set to < OFF >.

To prevent the <0> dial from turning inadvertently and changing the exposure

compensation amount, set the < ^ > switch to < OFF >■