User Manual

80
In the < 2 >, < 3 >, < 4 >, and < 5 > Basic Zone modes, you can shoot
with the settings matching the lighting or scene type. Normally, [
Default
setting
] is adequate, but if the settings match the lighting condition or
scene, the picture will look more accurate to your eyes.
For Live View shooting, if you set both [
Light/scene-based shots ] and
[
Ambience-based shots ] (p.76), you should first set [ Light/scene-
based shots
]. This will make it easier to see the resulting effect on the
LCD monitor.
1
Set the Mode Dial to any of the
following modes: <2>, <3>,
<4>, or <5>.
2
Display the Live View image.
 Press the < A > button to display the
Live View image.
Shooting by Lighting or Scene Type
Lighting or Scene A 7 C 2 3 4 5 P 6
(1) Default setting
k k k k
(2) Daylight
k k k k
(3) Shade
k k k k
(4) Cloudy
k k k k
(5) Tungsten light
k k k
(6) Fluorescent light
k k k
(7) Sunset
k k k k