C INSTRUCTION MANUAL E Y P O E INSTRUCTION MANUAL
Thank you for purchasing a Canon product. The EOS-1D Mark IV is a top-of-the-line, high-performance EOS DIGITAL SLR camera featuring a large, fine-detail CMOS sensor with approx. 16.10 effective megapixels, Dual “DIGIC 4”, high-precision and high-speed 45-point AF (39 cross-type points), approx. 10 fps continuous shooting, Live View shooting, and Full HD (Full HighDefinition) movie shooting.
Item Check List Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer. Camera (with eyecup, body cap, and battery compartment cap) Wide Strap L6 Cable Protector (with attaching screw, p.
Conventions Used in this Manual Icons in this Manual <6> <5> <9> <0> 9, 8 : Indicates the Main Dial. : Indicates the Quick Control Dial. : Indicates the Multi-controller. : Indicates the setting button. : Indicates that the respective function remains active for 6 sec. or 16 sec. respectively after you let go of the button. * In this manual, the icons and markings indicating the camera’s buttons, dials, and settings correspond to the icons and markings on the camera and on the LCD monitor.
Chapters Introduction 2 Camera basics. 1 2 3 4 5 6 7 8 9 10 11 Getting Started 27 Image Settings Image-recording quality, ISO speed, Picture Style, etc. Setting the AF and Drive Modes Setting the AF mode, AF point, and drive mode. Exposure Control Y P O Metering mode, shooting mode, flash, and other settings. Live View shooting Shoot photos while viewing the LCD monitor. C Shooting Movies Shoot movies while viewing the LCD monitor. Image Playback Playing back photos and movies.
Contents Introduction Item Check List.................................................................................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters ............................................................................................................ 5 Index to Features ............................................................................................ 10 Handling Precautions ..............
Contents A Registering a Picture Style.......................................................................70 Setting the White Balance................................................................................72 O Custom White Balance..............................................................................73 P Setting the Color Temperature....................................................................78 u White Balance Correction ............................................................
Contents 5 6 Live View Shooting 125 z Preparing for Live View Shooting ............................................................ 126 z Live View Shooting .................................................................................. 127 Shooting Function Settings ........................................................................... 129 Menu Function Settings................................................................................. 130 Using AF to Focus ..............................
Contents 8 Sensor Cleaning 9 Printing Images 10 183 f Automatic Sensor Cleaning ....................................................................184 Appending Dust Delete Data..........................................................................185 Manual Sensor Cleaning................................................................................187 189 Preparing to Print ...........................................................................................190 wPrinting..............
Index to Features Power Battery • Charging • Calibration • Battery check • Battery information Power outlet Auto power off Î p.28 Î p.30 Î p.35 Î p.247 Î p.33 Î p.52 Lens Attaching/Detaching Î p.39 Basic Settings (Menu Functions) Menus Language Date/Time LCD brightness adjustment Beeper Release shutter without card Clear camera settings Î p.46 Î p.49 Î p.49 Î p.180 Î p.52 C Î p.52 Î p.53 Recording Images Format Select card Recording to a card Create/select a folder File name File No. Î p.50 Î p.
Index to Features Drive Drive modes Maximum burst Self-timer Image playback Î p.101 Î p.62 Î p.102 Shooting Program AE Shutter-priority AE Aperture-priority AE Manual exposure Bulb Mirror lockup Depth-of-field preview Î p.106 Î p.108 Î p.110 Î p.112 Î p.116 Î p.118 Î p.111 Exposure adjustment Exposure compensation AEB AE lock Safety shift Flash Y P O Î p.113 Î p.114 Î p.115 Î p.210 C External flash Î p.119 Flash control Î p.121 Flash Custom Functions Î p.
Handling Precautions Camera Care This camera is a precision instrument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater. If you accidentally drop the camera into water, promptly consult your nearest Canon Service Center. Wipe off any water droplets with a dry cloth. If the camera has been exposed to salty air, wipe it with a well-wrung wet cloth. Never leave the camera near anything having a strong magnetic field such as a magnet or electric motor.
Handling Precautions LCD Panel and LCD Monitor Although the LCD monitor is manufactured with very high precision technology with over 99.99% effective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc., are not a malfunction. They do not affect the images recorded. If the LCD monitor is left on for a prolonged period, screen burn-in may occur where you see remnants of what was displayed.
Quick Start Guide 1 Install the battery. (p.32) 2 Attach the lens. (p.39) 3 Set the lens focus mode switch to . (p.39) 4 5 14 Take off the cap and insert a fullycharged battery. To charge the battery, see page 28. Align it with the red dot. C Y P O Insert the card. (p.36) The left slot is for a CF card, and the right slot is for an SD card. Set the power switch to <1>. (p.
Quick Start Guide Set the camera to the default settings. (p.53) 6 On the menu screen under the [7] tab, select [Clear all camera settings]. • Press the button and turn the <6> or <5> dial to select it, then press <0>. • The Program AE mode will take effect. Focus the subject. (p.41) Aim the Area AF frame over the subject. Press the shutter button halfway, and the camera will focus the subject. 7 8 9 C Y P O Take the picture. (p.41) Press the shutter button completely to take the picture.
Nomenclature Lens mount index (p.39) Mirror (p.118,187) Movie microphone (p.143) Self-timer lamp (p.102) Shutter button (p.41) Lens lock pin Lens release button (p.39) Grip Depth-of-field preview button (p.111) Vertical-grip on/off switch (p.43) Vertical-grip FE lock/Multi-spot metering/ Movie shooting button (p.43,119/105/143) C Y P O Lens mount Contacts (p.13) Tripod socket Body number Vertical-grip Main Dial (p.43,42) Hand strap mount (p.26) Vertical-grip shutter button (p.
Nomenclature Exposure compensation/ Aperture button (p.113/112) ISO speed setting button (p.64,144) LCD panel illumination button (p.116) FE lock/ Multi-spot metering/ Movie shooting button (p.119/105/143) Hot shoe Flash-sync contacts <6> Main Dial (p.42) Eyecup (p.40) Strap mount (p.26) C LCD monitor (p.44,180) Y P O <0> Setting/ Live View shooting button (p.44/126) <5> Quick Control Dial (p.43) <9> Multi-controller (p.42) Power/Quick Control Dial switch (p.
Nomenclature Metering mode selection/Flash exposure compensation button (p.104/119) Focal plane mark Top LCD panel (p.21) AF start button (p.41,95,96,127,147) Shooting mode selection button (p.106,127,143,144) AE lock/ Reduce button (p.115/161,197) AF mode selection/ Drive mode selection button (p.94/101) AF point selection/ Magnify button (p.97/161,197) AEB setting button (p.114) Wireless File Transmitter mounting hole C Y P O Eyepiece shutter lever (p.
Nomenclature Menu button (p.44) Info/Trimming orientation button (p.128,148,156,246/197) CF card slot (p.36) Strap mount (p.26) SD card slot (p.36) Card slot cover (p.36) Terminal cover Playback button (p.156) Rear LCD panel (p.22) C Y P O CF card eject button (p.38) Access lamp (p.38) Card slot cover release handle (p.36) Voice memo microphone (p.174) Erase button (p.179) Protect/Voice memo button (p.172/174)/ Picture Style selection button (p.
Nomenclature Viewfinder Information Center spot metering circle Area AF frame AF point : Cross-type AF points : AF points Focusing screen Exposure level indicator Max.
Nomenclature Top LCD Panel Shutter speed Bulb (buLb) Bulb exposure time (min.:sec.
Nomenclature Rear LCD Panel External media selection icon*3 External media connection icon*3 White balance correction SD card indicator Monochrome shooting White balance Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom P Color temperature SD card selection icon CF card indicator CF card selection icon Image size 3 Large 4 Medium1 5 Medium2 6 Small 1 RAW K1 Medium RAW 61 Small RAW C Y P O File No.
Nomenclature Shooting Settings Display Aperture AE lock ISO speed Flash-ready High-speed sync (FP flash) FE lock/ FEB in-progress Shutter speed BULB: Bulb Shooting mode d : Program AE f : Aperture-priority AE a : Manual exposure s : Shutter-priority AE Exposure level indicator Highlight tone priority Metering mode q Evaluative metering w Partial metering r Spot metering e Center-weighted average metering Flash exposure compensation Drive mode u Single shooting o High-speed c
Nomenclature Battery Pack LP-E4 Lock lever Contacts Battery release handle Handle end Contact end C 24 Protective cover Y P O
Nomenclature Battery Charger LC-E4 Charger for Battery Pack LP-E4 (p.28).
Nomenclature Attaching the Neck Strap and Hand Strap Using the Cable Protector Strap Cable Protector Y P O Interface cable HDMI cable (Sold separately) System extension terminal C Hand strap (Sold separately) 1 2 3 Attaching the Neck Strap 4 5 6 After attaching the strap, pull it at the buckle to take up the slack and to make sure it does not loosen.
Getting Started Y P O This chapter explains preliminary steps and basic camera operations. C Minimizing Dust When changing lenses, do it quickly in a place with minimal dust. When storing the camera without a lens attached, be sure to attach the body cap to the camera. Remove dust on the body cap before attaching it.
Charging the Battery 1 Connect the charger to a power outlet. Connect the power plug to a power outlet, and connect the power cord to the charger. When no battery is attached, all the indicator lamps will be off. the protective covers 2 Remove from the charger and battery. Remove the protective cover on the charger by sliding it out. C Y P O the battery. 3 Recharge Slide the battery into the charger’s slot as shown by the arrow, and make sure it is securely attached.
Charging the Battery Tips for Using the Battery and Charger Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually discharge and lose its power. After recharging the battery, detach it and unplug the power cord from the power outlet. When not using the battery and charger, attach the protective covers. Use the battery in an ambient temperature range of 0°C - 45°C / 32°F - 113°F.
Charging the Battery Use the Car’s Cigarette Lighter Socket to Recharge the Battery With Car Battery Cable CB-570 (sold separately), you can connect the charger’s car battery cable socket ( terminal) to your car’s cigarette lighter socket. When recharging the battery this way, be sure that the car’s engine is running. If the car engine is off, disconnect the car battery cable from the cigarette lighter socket.
Charging the Battery All Three Charge Level Indicators Blink If all three Charge level indicators blink in green, it means that the battery’s internal temperature is not within 0°C - 40°C / 32°F - 104°F. The battery will start recharging when the internal temperature is within 0°C - 40°C / 32°F - 104°F.
Installing and Removing the Battery Installing the Battery Insert a fully charged Battery Pack LP-E4 into the camera. 1 Remove the battery compartment cap. the battery. 2 Insert Insert the battery firmly all the way, and turn the release handle as shown by the arrow. Removing the Battery C 1 Y P O Flip out the battery release handle and turn it as shown by the arrow. the battery. 2 PullToout prevent shorting, be sure to attach the protective cover (p.24) to the battery.
Using a Household Power Outlet (Sold separately) With AC Adapter Kit ACK-E4 (sold separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the DC Coupler’s plug. Connect the DC Coupler’s plug to the AC adapter’s DC terminal. the power cord. 2 Connect Connect the power plug to the power outlet, then connect the power cord to the AC adapter. Y P O the DC Coupler.
Turning on the Power Power/Quick Control Dial Switch <2> : The camera is turned off and does not operate. Set to this position when not using the camera. <1> : The camera turns on. : The camera and <5> operate (p.43). About the Automatic Self-Cleaning Sensor Whenever you set the power switch to <1/J> or <2>, the sensor cleaning will be executed automatically. During the sensor cleaning, the LCD monitor will display .
Turning on the Power Checking the Battery Level When the power switch is set to <1>, the battery level will be indicated in one of six levels: Icon Level (%) Indication z 100 - 70 Sufficient battery level x 69 - 50 Battery level exceeds 50% c 49 - 20 Battery level below 50% m 19 - 10 Battery level is low b n Battery Life 9-1 Battery will be exhausted soon Y P O 0 Recharge the battery Temperature At 23°C / 73°F At 0°C / 32°F Possible shots Approx. 1500 Approx.
Installing and Removing the Card The camera can use a CF card and SD card. Images can be recorded when at least one card is installed in the camera. If both card slots have a card, you can select which card to record images with or record the same images simultaneously on both cards (p.56, 57). If you use an SD card, be sure the card’s write protect switch is set upward to enable writing/erasing. Installing the Card 1 Open the cover. Flip out and turn the cover release handle as shown by the arrow.
Installing and Removing the Card Shots remaining Card selection icon CF card indicator the power switch to <1>. 4 Set X The number of remaining shots will be displayed on the top LCD panel and in the viewfinder. X The rear LCD panel will indicate which card(s) has been installed. The images will be recorded to the card with the < > arrow next to the respective card’s indicator. SD card indicator C Y P O SDHC memory cards can be used with the camera.
Installing and Removing the Card Removing the Card 1 Open the cover. Set the power switch to <2>. Make sure the access lamp is off, then open the cover. the card. 2 Remove To remove the CF card, push the eject button. To remove the SD card, push it in gently and release it. Then pull it out. Close the cover. The access lamp lights or blinks while data is being transferred to the card and when data is being recorded, read, or erased on the card.
Attaching and Detaching a Lens Attaching a Lens 1 Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrow. the lens. 2 Attach Align the red dots on the lens and camera and turn the lens as shown by the arrow until it clicks in place. Y P C4 O the lens, set the focus mode 3 On switch to (autofocus). If it is set to (manual focus), autofocus will not operate. Remove the front lens cap.
Basic Operation Adjusting the Viewfinder Clarity 1 Remove the eyecup. While grasping both sides of the eyecup, slide it upward to remove. the adjustment. 2 Make Turn the knob to the right or left until the AF points or the center spot metering circle (p.20) looks sharp in the viewfinder. Attach the eyecup. Y P O If the camera’s dioptric adjustment still cannot provide a sharp viewfinder image, using Dioptric Adjustment Lens Eg (sold separately) is recommended.
Basic Operation Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing halfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture) is displayed on the top LCD panel and in the viewfinder (9). Pressing completely This releases the shutter and takes the picture.
Basic Operation 6 Making Selections with the Main Dial (1) After pressing a button, turn the <6> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <6> dial to set the desired setting. When the function selection turns off or if you press the shutter button halfway, the camera will be ready to shoot.
Basic Operation 5 Making Selections with the Quick Control Dial Before using the <5> dial, set the power switch to . (1) After pressing a button, turn the <5> dial. When you press a button, its function remains selected for 6 seconds (9). During this time, you can turn the <5> dial to set the desired setting. When the function selection turns off or if you press the shutter button halfway, the camera will be ready to shoot.
Menu Operations You can set various settings with the menus such as the beeper, date/ time, etc. While looking at the LCD monitor, use the button on the camera back and the <6> <5> dials.
Menu Operations Menu Setting Procedure 1 Display the menu. Press the button to display the menu. a tab. 2 Select Turn the <6> dial to select a tab. the desired item. 3 Select Turn the <5> dial to select the item, then press <0>. Y P O the setting. 4 Select Turn the <5> dial to select the C desired setting. The current setting is indicated in blue. the selected setting. 5 SetPress <0> to set it. Exit the menu. 6 Press the button to exit the menu and return to camera shooting ready.
Menu Settings 1 Shooting 1 (Red) White balance Page Q / W / E / R / Y / U / I / O (1 - 5) / P (2500 - 10000) / PC-1 - 5 72 Custom WB registration Manual registration of white balance data 73 WB SHIFT/BKT WB correction: B/A/M/G bias, 9 levels each WB-BKT: B/A and M/G bias, single-level increments, ±3 levels 79 80 Color space sRGB / Adobe RGB 92 Picture Style PStandard / QPortrait / RLandscape / SNeutral / UFaithful / VMonochrome / WUser Def.
Menu Settings 4 Playback 2 (Blue) Page Highlight alert Disable / Enable 157 AF point display Disable / Enable 158 Histogram Brightness / RGB 158 Enlarge display Enlarge from image center / Enlarge from selected AF point 161 Image jump w/6 1 image / 10 images / 100 images / Date / Folder / Movies / Stills 160 Slide show Select the images and set the Play time and Repeat settings for automatic playback 168 Auto power off 1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min.
Menu Settings 7 Set-up 3 (Yellow) Page Save/load settings on Save/load camera settings to/from the card media 238 Regist/apply basic settings The camera’s basic settings are registered in and applied to the camera 240 Clear all camera settings Resets the camera to the default settings 53 Copyright information Display copyright information / Enter author’s name / Enter copyright details / Delete copyright information 90 Sensor cleaning Auto cleaning / Clean now / Clean manually 184 Firmware
Before You Start 3 Setting the Interface Language 1 Select [LanguageK]. Under the [6] tab, select [LanguageK] (the third item from the top), then press <0>. the desired language. 2 SetTurn the <5> dial to select the language, then press <0>. X The interface language will change. Y P C1 O 3 Setting the Date and Time Check if the camera’s date and time are set correctly. If necessary, set the correct date and time. Select [Date/Time]. Under the [6] tab, select [Date/ Time], then press <0>.
Before You Start 3 Formatting the Card If the card is new or was previously formatted by another camera or personal computer, formatting the card with the camera is recommended. When the card is formatted, all images and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep. If necessary, transfer the images to a personal computer, etc., before formatting the card. 1 Select [Format]. Under the [5] tab, select [Format], then press <0>.
Before You Start When the card is formatted or data is erased, only the file management information is changed. The actual data is not completely erased. Be aware of this when selling or discarding the card. When discarding the card, execute low-level formatting or destroy the card physically to prevent the data from being leaked. The card capacity displayed on the card format screen might be smaller than the capacity indicated on the card.
Before You Start 3 Set the Power-off Time/Auto Power Off To save battery power, the camera turns off automatically after a certain time of non-operation. You can change this auto power-off time. If you do not want the camera to turn off automatically, set this to [Off]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button. 1 Select [Auto power off]. Under the [5] tab, select [Auto power off], then press <0>. the desired time.
Before You Start 3 Reverting the Camera to the Default Settings The camera’s shooting settings and menu settings can be reverted to the default. 1 Select [Clear all camera settings]. Under the [7] tab, select [Clear all camera settings], then press <0>. [OK]. 2 Select Turn the <5> dial to select [OK], then press <0>. X The camera’s default settings will be as shown below.
Before You Start Camera Settings Auto power off Beep Release shutter without card Review time Highlight alert AF point display Registered AF point Histogram Enlarge display Image jump w/6 Auto rotate Slide show LCD brightness Date/Time Language Video system Basic settings My Menu settings Display from My Menu Custom Functions 54 Live View/Movie Shooting Settings 1 min. On LV z/k setting AF mode Grid display Exposure simulation Enable 2 sec.
Image Settings Y P O This chapter explains image-related function settings: Image-recording quality, ISO speed, Picture Style, white balance, Auto Lighting Optimizer, lens peripheral illumination correction, etc.
Selecting the Card to Record or Playback This Instruction Manual assumes that a CF card or SD card is in the camera. When an external media is used via the Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A (both sold separately), the icon will appear as the third recording media. It can be selected in the same way as with the CF card and SD card . If either a CF card or an SD card is in the camera, the card to record images will be selected automatically.
Selecting the Card to Record or Playback 3 Recording Method with Two Cards Inserted If both the CF card and SD card are inserted into the camera, you can set the recording method for the cards. 1 Select [Record func+media/folder sel.]. Under the [5] tab, select [Record func+media/folder sel.], then press <0>. [Record func.]. 2 Select Turn the <5> dial to select [Record func.], then press <0>. Y P O the recording method. 3 Select Turn the <5> dial to select the recording method, then press <0>.
Selecting the Card to Record or Playback When [Auto switch media] is set, the card for recording will switch from f to g to u. When [Rec. separately] or [Rec. to multiple] is set, the image will be recorded under the same file number to both the CF and SD cards. Also, the top LCD panel and viewfinder will display the number of possible shots of the card having the lower number. If one of the cards becomes full, [Card* full] will be displayed and shooting will be disabled.
Setting the Image-recording Quality You can set the image size (recorded pixels), image type (JPEG or RAW), and JPEG quality (compression rate). Selecting the Image Size 3/4/5/6 will record the image as a JPEG image. In the 1/K1/ 61 mode, the image will require processing with the software provided. You can set the image size in one of the two ways below. Using the Rear LCD Panel to Set the Image Size 1 Press the button.
Setting the Image-recording Quality Using the Menu Screen to Set the Image Size Select [Image size]. 1 Under the [2] tab, select [Image size], then press <0>. image size. 2 SetTotheselect a RAW image size, turn the <6> dial. To select a JPEG image size, turn the <5> dial. On the screen, the “***M (megapixels) **** x ****” number indicates the recorded pixel count, and [****] is the number of possible shots. Press <0> to set it.
Setting the Image-recording Quality Guide to Image-recording Quality Settings (Approx.) Pixels Recorded Print Size File Size (MB) Possible Shots 3 16.0M A3 or larger 5.7 692 85 (121) 4 12.4M Around A3 4.5 874 111 (164) Image Size Maximum Burst 5 8.4M A4 or larger 3.5 1148 182 (309) 6 4.0M A5 or larger 2.0 1957 1957 (5447) 16.0M A3 or larger 26 (28) 22.2 175 1+3 16.0M+16.0M 22.2+5.7 139 20 (20) 1+4 16.0M+12.4M 22.2+4.5 145 20 (20) 1+5 16.0M+8.4M 22.2+3.
Setting the Image-recording Quality About RAW A RAW image is the raw data output by the image sensor, converted to digital data and recorded on the card as is. You can select from 1, K1, or 61 (Commonly referred as RAW in this manual). With RAW images, you can use the provided software to make various adjustments as desired and then generate a JPEG, TIFF, etc., image. Commercially-available software might not be able to display RAW images. Using the provided software is recommended.
Setting the Image-recording Quality 3 Setting the JPEG Quality (Compression Rate) The recording quality (compression rate) can be set for each image size 3/4/5/6. 1 Select [JPEG quality]. 2 Select the image size. Under the [2] tab, select [JPEG quality], then press <0>. Turn the <5> dial to select the image size, then press <0>. C3 Y P O Set the desired quality (compression rate). Turn the <5> dial to select the setting, then press <0>.
Z: Setting the ISO Speed Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. 1 Press the button. (9) the ISO speed. 2 SetWhile looking at the top LCD panel or in the viewfinder, turn the <6> dial. ISO speed can be set within ISO 10012800 in 1/3-stop increments. With “A” selected, the ISO speed will be set automatically (p.65).
Z: Setting the ISO Speed About “A” (Auto) ISO Speed If the ISO speed is set to “A”, the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting mode.
A Selecting a Picture Style By selecting a Picture Style, you can obtain image effects matching your photographic expression or the subject. 1 Press the button. When the camera is ready to shoot, press the button. X The Picture Style screen will appear. a Picture Style. 2 Select Turn the <6> or <5> dial to select a Picture Style, then press <0>. X The Picture Style will be set and the camera will be ready to shoot. Y P O You can also use the [1 Picture Style] menu to select the Picture Style.
A Selecting a Picture Style S Neutral This Picture Style is for users who prefer to process images with their computer. For natural colors and subdued images. U Faithful This Picture Style is for users who prefer to process images with their computer. When the subject is captured under a daylight color temperature of 5200K, the color is adjusted colorimetrically to match the subject’s color. The image is dull and subdued. V Monochrome Creates black-and-white images.
A Customizing a Picture Style You can customize a Picture Style by adjusting individual parameters like [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see the next page. 1 Press the button. a Picture Style. 2 Select Turn the <6> or <5> dial to select a Picture Style, then press the button. a parameter. 3 Select Turn the <5> dial to select the parameter, then press <0>. C Y P O the parameter.
A Customizing a Picture Style By selecting [Default set.] in step 3, you can revert the respective Picture Style to its default parameter settings. To shoot with the Picture Style you modified, follow step 2 on the preceding page to select the modified Picture Style and then shoot. Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast].
A Registering a Picture Style You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as for sharpness and contrast are different. You can also adjust the parameters of a Picture Style which has been registered to the camera with the provided software. 1 Press the button. [User Def.].
A Registering a Picture Style the parameter. 6 SetTurn the <5> dial to set the parameter as desired, then press <0>. For details, see “Customizing a Picture Style” on pages 68-69. Press the button to register the new Picture Style. The Picture Style selection screen will then reappear. X The base Picture Style will be indicated on the right of [User Def. *]. C Y P O If a Picture Style has already been registered under [User Def.
Setting the White Balance White balance (WB) is for making the white areas look white. Normally, the (Auto) setting will obtain the correct white balance. If naturallooking colors cannot be obtained with , you can set the white balance manually to suit the respective light source. 1 Press the button. (9) Press the button once or twice to display the WB on the rear LCD panel’s upper right. WB z Card/Image size the white balance. 2 Select Turn the <5> dial to select the WB.
O Custom White Balance Custom white balance enables you to manually set the white balance for a specific light source for better accuracy. Up to five Custom white balance data can be registered to the camera. You can also append a name (caption) to the registered Custom white balance data. 3 Registering Custom WB There are two ways to register Custom white balance data. You can either take a picture and register it, or register an image already saved in the card.
O Custom White Balance a solid-white object. 4 Photograph The plain, white object should fill the center spot metering circle. Focus manually and set the standard exposure for the white object. Any white balance mode may be set. Spot metering circle X The Custom WB data will be registered. To use the Custom WB, see “Selecting and Shooting with the Custom WB data” (p.76). C Y P O Custom WB data can also be registered as follows: 1. Press the button and turn the <5> dial to select (p.72). 2.
O Custom White Balance Register image on card First follow step 4 under “Capture and register the image” (p.73, 74) to take a picture of a plain, white object. This image saved in the card can then be registered for Custom WB. The procedure up to step 2 is the same as with “Capture and register the image”. 1 Select [Custom WB regist.]. the Custom WB No. to be 2 Select registered. [Register image on card]. 3 Select Turn the <5> dial to select [Register image on card], then press <0>.
O Custom White Balance 3 Selecting and Shooting with the Custom WB data Registered image 1 Select the Custom WB No. On the Custom WB registration screen, select the No. of the registered Custom WB. [Set as white balance]. 2 Select Turn the <5> dial to select [Set as white balance], then press <0>. X The WB will be set to the registered . Y P O the picture. 3 Take X The picture will be taken with the C setting. You can also select the Custom WB No. while looking at the rear LCD panel.
O Custom White Balance [Edit caption]. 2 Select Turn the <5> dial to select [Edit caption], then press <0>. any name. 3 Enter Press the button, and the text C4 palette will be highlighted in a color frame and text can be entered. Operate the <5> dial or <9> to move the and select the desired character. Then press <0> to enter it. You can enter up to 20 characters. To delete a character, press the button. Y P O Exit the setting. After entering the name, press the button.
P Setting the Color Temperature You can set the white balance’s color temperature numerically in Kelvin. This is for advanced users. 1 Press the button. (9) Press the button once or twice to display the white balance on the rear LCD panel’s upper right. WB z Card/Image size
. 2 Select Turn the <5> dial to select
. the desired color 3 Set temperature. Y P O Turn the <6> dial to set the color temperature. The color temperature can be set from 2500K to 10000K in 100K increments.
u White Balance Correction You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter. Each color can be corrected to one of nine levels. This is for advanced users who are familiar with using color temperature conversion or color compensating filters. White Balance Correction 1 Select [WB SHIFT/BKT]. Under the [1] tab, select [WB SHIFT/BKT], then press <0>.
u White Balance Correction White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing (WB-BKT). White balance bracketing is possible up to ±3 levels in single-level increments. Set the white balance bracketing amount.
Auto Lighting Optimizer If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. With JPEG images, the correction is done when the image is captured. Setting information is appended to RAW images and automatic correction is possible with Digital Photo Professional (provided software). By default, [Standard] is set. However, with [8C.Fn II -4: Auto Lighting Optimizer], you can adjust the correction amount (p.215). 1 Set [8C.
3 Lens Peripheral Illumination Correction Due to the lens characteristics, the four corners of the picture might look darker. This is called lens light fall-off or drop in peripheral illumination. With JPEG images, the correction is done when the image is captured. Setting information is appended to RAW images and automatic correction is possible with Digital Photo Professional (provided software). The default setting is [Enable]. 1 Select [Peripheral illumin. correct.].
3 Lens Peripheral Illumination Correction About the Lens Correction Data The camera already contains lens peripheral illumination correction data for approx. 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera. With EOS Utility (provided software), you can check which lenses have their correction data registered in the camera.
3 Creating and Selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder 1 Select [Record func+media/folder sel.]. Under the [5] tab, select [Record func+media/folder sel.], then press <0>. Y P O [Folder]. 2 Select Select [Folder], then press <0>. C 3 Select [Create folder]. Turn the <5> dial to select [Create folder], then press <0>. [OK].
3 Creating and Selecting a Folder Selecting a Folder Lowest file number Number of images in folder With the Select folder screen displayed, turn the <5> dial to select the desired folder, then press <0>. X The folder where the captured images will be saved is selected. Subsequent captured images will be recorded into the selected folder.
3 Changing the File Name The file name has four alphanumeric characters followed by a four-digit image number (p.88) and (Ex.) BE3B0001.JPG extension. The first four alphanumeric characters are set upon factory shipment and unique to the camera. However, you can change it. With “User setting1,” you can change and register the four characters as desired. With “User setting2,” if you register three characters, the fourth character from the left will be appended automatically to indicate the image size.
3 Changing the File Name the setting. 4 ExitEnter the required number of alphanumeric characters, then press the button. X The new file name will be registered and the screen in step 2 will reappear. the registered file name. 5 Select Turn the <5> dial to select [File name], then press <0>. Turn the <5> dial to select the registered file name, then press <0>. If User setting2 has been registered, select “*** (the 3 characters registered) + image size”.
3 File Numbering Methods The four-digit file number is like the frame number on a roll of film. The captured images (Ex.) BE3B0001.JPG are assigned a sequential file number from 0001 to 9999 and saved in one folder. You can change how the file number is assigned. 1 Select [File numbering]. Under the [5] tab, select [File numbering], then press <0>. the file numbering method. 2 Select Turn the <5> dial to select the desired method, then press <0>.
3 File Numbering Methods Auto Reset The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Even after you replace the card, create a folder, or switch the target card (such as f → g), the file numbering continues in sequence from 0001 for the images saved. This is convenient if you want to organize images according to cards or folders.
3 Setting Copyright Information When you set the copyright information, it will be appended to the image as Exif information. You can check the entered copyright information with the camera. 1 Select [Copyright information]. Under the [7] tab, select [Copyright information], then press <0>. the desired option. 2 Select Turn the <5> dial, select either [Enter author’s name] or [Enter copyright details], then press <0>. C Y P O text.
3 Setting Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2 on the preceding page, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2 on the preceding page, you can delete the [Author] and [Copyright] information. C Y P O You can also enter the copyright information with EOS Utility (provided software).
3 Setting the Color Space The color space refers to the range of reproducible colors. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. 1 Select [Color space]. Under the [1] tab, select [Color space], then press <0>. the desired color space. 2 SetSelect [sRGB] or [Adobe RGB], then press <0>. About Adobe RGB Y P O This color space is mainly used for commercial printing and other industrial uses.
Setting the AF and Drive Modes Y P O The Area AF frame has 45 AF points (39 high-precision crosstype points and 6 AF points). You can select any one of the 45 AF points to match your composition. C You can also select the AF mode and drive mode best matching the shooting conditions and subject. stands for auto focus. stands for manual focus.
E: Selecting the AF Mode Select the AF mode suiting the shooting conditions or subject. 1 On the lens, set the focus mode switch to . the button. 2 Press (9) the AF mode. 3 Select While looking at the top LCD panel, Y P O turn the <6> dial.
E: Selecting the AF Mode One-Shot AF for Still Subjects Suited for still subjects. When you press the shutter button halfway, the camera will focus only once. AF point Focus confirmation light C When focus is achieved, the AF point which achieved focus will flash in red, and the focus confirmation light in the viewfinder will also light. With evaluative metering, the exposure setting will be set at the same time focus is achieved.
E: Selecting the AF Mode AI Servo AF for Moving Subjects This AF mode is for moving subjects when the focusing distance keeps changing. While you hold down the shutter button halfway, the subject will be focused continuously. The exposure is set at the moment the picture is taken. AF is also possible by pressing the
button.
S Selecting the AF Point Select one of the 45 AF points to autofocus. Manual selection enables you to select one of the 45 AF points. And automatic selection has the camera automatically select one of the 45 AF points. 1 Press the button. (9) X The current AF point will be displayed in the viewfinder. the AF point. 2 Select Use <9> or turn the <6> or <5> dial. Automatic selection: AF Manual selection : SEL (Center) SEL AF (Off center) Y P O When the EF70-200mm f/2.
S Selecting the AF Point Selecting with the Dial To select a horizontal AF point, turn the <6> dial. To select a vertical AF point, turn the <5> dial. If all the peripheral AF points light up, automatic AF point selection will take effect. Y P O With [8C.Fn III -10: Selectable AF point], the selectable AF points can be limited to 19 or 11 AF points or to the inner or outer 9 AF points (p.223). With [8C.
S Selecting the AF Point Maximum f/stop: Up to f/2.8 [Manual selection] With the 39 AF points indicated by , high-precision, cross-type AF (both horizontal- and vertical-line sensitive) is possible during manual AF point selection. The cross-type sensors’ vertical-line sensitivity is approx. two times higher than their horizontal-line sensitivity. The remaining six AF [Automatic selection] points will be horizontal-line sensitive.
When Autofocus Fails Autofocus can fail to achieve focus (the focus confirmation light blinks) with certain subjects such as the following: Subjects difficult to focus Very low-contrast subjects (Example: Blue sky, solid-color walls, etc.) Subjects in very low light Extremely backlit or reflective subjects (Example: Car with a highly reflective body, etc.) Near and far subjects covered by an AF point (Example: Animal in a cage, etc.
R: Selecting the Drive Mode the button. 1 Press (9) the drive mode. 2 Select While looking at the top LCD panel, turn the <5> dial. u : Single shooting When you press the shutter button completely, one shot will be taken. o : High-speed continuous shooting (Max. 10 shots per sec.) p : Low-speed continuous shooting (Max. 3 shots per sec.) In the o and p modes, the camera will shoot continuously while you hold down the shutter button completely. k : 10-sec. self-timer l : 2-sec.
j Using the Self-timer the button. 1 Press (9) either or . 2 Select Look at the top LCD panel and turn the <5> dial to select or . k : 10-sec. self-timer l : 2-sec. self-timer picture. 3 TakeLookthethrough the viewfinder, focus the subject, then press the shutter button completely. X The self-timer lamp will blink, and 10 sec. or 2 sec. later, the picture will be taken. X The top LCD panel counts down the seconds until the picture is taken.
Exposure Control Y P O Select the shooting mode to suit the subject or shooting objective. You can set the shutter speed and/or aperture to obtain the exposure you want. Also, with an EX-series Speedlite, you can take flash pictures as easily as shooting without flash. C First set the power switch to .
q Selecting the Metering Mode You can select one of four methods to measure the subject brightness. 1 Press the button. (9) the metering mode. 2 Select While looking at the top LCD panel, turn the <6> dial. q: Evaluative metering w: Partial metering r: Spot metering e: Center-weighted average metering q Evaluative metering This is a general-purpose metering mode suited even for backlit subjects. The camera sets the exposure automatically to suit the scene.
q Selecting the Metering Mode Multi-Spot Metering With multiple spot meter readings, you can see the relative exposure levels of multiple areas in the picture and set the exposure to obtain the desired result. 1 Set the metering mode to r spot metering. 2 Press the button. (8) Aim the spot metering circle over the area where you want a relative exposure reading, then press the button. X On the right of the viewfinder, the relative exposure level will be displayed for the spot meter reading taken.
d: Program AE The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. This is called Program AE. * stands for Program. * AE stands for Auto Exposure. 1 Set the shooting mode to . Press the button and turn the <6/5> dial to select . Y P O the subject. 2 Focus Look through the viewfinder and aim the selected AF point over the subject. Then press the shutter button halfway.
d: Program AE the picture. 4 TakeCompose the shot and press the shutter button completely. Y P O If the “30"” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or use flash. C If the “8000” shutter speed and the minimum aperture blink, it indicates overexposure. Lower the ISO speed or use an ND filter (sold separately) to reduce the amount of light entering the lens. During automatic AF point selection (p.
s: Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure suiting the brightness of the subject. This is called shutter-priority AE. A faster shutter speed can freeze the action or moving subject. Or a slower shutter speed can create a blurred effect, giving the impression of motion. * stands for Time value. Blurred motion (Slow shutter speed) 1 Frozen action (Fast shutter speed) Y P O Set the shooting mode to .
s: Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture stops blinking or set a lower ISO speed. Y P O Shutter Speed Display The shutter speeds from “8000” to “4” indicate the denominator of the fractional shutter speed.
f: Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the correct exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/ number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus. On the other hand, a lower f/ number (larger aperture hole) will make less of the foreground and background fall within acceptable focus.
f: Aperture-Priority AE If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “8000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (higher f/number) until the shutter speed blinking stops or set a lower ISO speed. Aperture Display The higher the f/number, the smaller the aperture opening will be.
a: Manual Exposure In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator in the viewfinder or use a commercially-available exposure meter. This method is called manual exposure. * stands for Manual. 1 Shutter speed Aperture Set the shooting mode to . Press the button and turn the <6/5> dial to select . the shutter speed and 2 Set aperture.
O Exposure Compensation Exposure compensation can increase (brighter) or decrease (darker) the standard exposure set by the camera. You can set the exposure compensation up to ±3 stops in 1/3-stop increments. Exposure compensation can be set in the shooting modes. 1 Increased exposure Decreased exposure Check the exposure. Press the shutter button halfway and check the exposure level indicator. the exposure compensation 2 Set amount.
h Auto Exposure Bracketing (AEB) By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three successive shots. This is called AEB. * AEB stands for Auto Exposure Bracketing. 1 Hold down the and buttons simultaneously. (9) X The icon and “0.0” will appear on the top LCD panel. the AEB amount. 2 SetTurn the <6/5> dial to set the AEB amount. “1.0” is the AEB increment, and is the AEB amount. Y P O picture.
A AE Lock Use AE lock when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the button to lock the exposure, then recompose and take the shot. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. Press the shutter button halfway. X The exposure setting will be displayed. the button.
Bulb Exposures When bulb is set, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the shooting mode to . Press the button and turn the <6/5> dial to select . the desired aperture. 2 SetWhile looking at the top LCD panel, turn the <6/5> dial.
Bulb Exposures Using the Eyepiece Shutter If you take a picture without looking at the viewfinder, light entering the eyepiece can throw off the exposure. To prevent this, slide the eyepiece shutter lever as shown by the arrow to shutter the eyepiece. You need not shutter the eyepiece during Live View shooting or movie shooting.
2 Mirror Lockup Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations (mirror shock) can also help when you use a super telephoto lens or shoot close ups (macro photography). When [8C.Fn III -17: Mirror lockup] is set to [1: Enable] or [2: Enable: Down with SET] (p.226), shooting with mirror lockup is possible. 1 Focus the subject, press the shutter button completely and let go of it.
D Flash Photography EOS-dedicated, EX-series Speedlites An EX-series Speedlite (sold separately) makes flash photography as easy as shooting without flash. For detailed instructions, see the EX-series Speedlite’s instruction manual. This camera is a Type-A camera that can use all the features of EX-series Speedlites. To set the flash functions and flash Custom Functions with the camera’s menu, see pages 121-124.
D Flash Photography Using Non-EX-series Canon Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TTL autoflash mode, the flash can be fired at full output only. Set the camera’s shooting mode to (manual exposure) or (aperture-priority AE) and adjust the aperture setting before shooting. When using a Speedlite which has manual flash mode, shoot in the manual flash mode. Using Non-Canon Flash Units Sync Speed The camera can synchronize with compact, non-Canon flash units at 1/300 sec.
3 Setting the Flash When an EX-series Speedlite (such as the 580EX II, 430EX II, and 270EX) settable by the camera is attached, you can use the camera’s menu screen to set the Speedlite’s flash function settings and Custom Functions. First attach the Speedlite to the camera and turn on the Speedlite. Setting Flash Functions 1 Select [External Speedlite control]. Under the [2] tab, select [External Speedlite control], then press <0>. Y P O [Flash function settings].
3 Setting the Flash Functions settable under [Flash function settings] On the screen, the settable functions and what’s displayed will differ depending on the Speedlite, current flash mode, flash Custom Function settings, etc. To see which functions your Speedlite provides, refer to the Speedlite’s instruction manual. Flash mode With an external Speedlite, you can select the flash mode to suit your flash shooting. [E-TTL II] is the standard mode of EX-series Speedlites for automatic flash shooting.
3 Setting the Flash FEB While the flash output is changed automatically, three flash shots are taken. For details, see the instructions for FEB (Flash Exposure Bracketing) in your Speedlite’s instruction manual. Flash exposure compensation The same setting as “Flash exposure compensation” on page 119 can be done. E-TTL II For normal flash exposures, set it to [Evaluative]. If [Average] is set, the flash exposure will be averaged for the entire metered scene as with an external metering flash.
3 Setting the Flash Flash C.Fn Settings 1 Select [Flash C.Fn settings]. Turn the <5> dial to select [Flash C.Fn settings], then press <0>. 2 Set the flash function. Turn the <5> dial to select the function number, then set the function. The procedure is the same as setting the camera’s Custom Functions (p.204). Canceling Speedlite Custom Function Settings In step 1, select [Clear all Speedlite C.Fn’s] to clear all the Speedlite’s Custom Function settings (except [C.Fn -0: Distance indicator display]).
Live View Shooting Y P O You can shoot while viewing the image on the camera’s LCD monitor. This is called “Live View shooting.” Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images. Using a tripod is recommended.
z Preparing for Live View Shooting This sets the camera for Live View shooting of still photos. To shoot movies, see page 141. 1 Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func. set.], then press <0>. [LV z/k set.]. 2 Select Turn the <5> dial to select [LV z/ k set.], then press <0>. “LV” stands for Live View. Y P O [Stills]. 3 Select Turn the <5> dial to select [Stills], C 4 then press <0>. Exit the menu.
z Live View Shooting 1 Select the shooting mode. Press the button and turn the <6/5> dial to select the shooting mode. the subject. 2 Focus Before shooting, focus with AF or manual focus (p.131-138). When you press the shutter button halfway, the camera will focus with the current AF mode. Y P O the picture. 3 TakePress the shutter button completely. X The picture will be taken and the captured image is displayed on the LCD monitor.
z Live View Shooting B About the Information Display Each time you press the button, the information display will change.
Shooting Function Settings As with normal shooting through the viewfinder, while the Live View image is displayed, you can still use the camera buttons to change settings and playback images. Pressing the button will display the setting screen on the LCD monitor. To change the setting, turn the <6> or <5> dial. When you press the button, turn the <6> dial to set the card and turn the <5> dial to set the image size or white balance while looking at the rear LCD panel.
3 Menu Function Settings During the Live View display, you can still set the menu options. Live View functions are listed below. Under the [6] tab with the [Live View/ Movie func. set.] screen, you can set the following functions. AF mode (p.131-137) You can select [Live mode], [u Live mode], or [Quick mode]. Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. You can check the camera tilt before shooting.
Using AF to Focus Selecting the AF Mode The AF modes available are [Live mode], [u Live mode] (face detection, p.132), and [Quick mode] (p.136). If you want to achieve precise focus, set the lens focus mode switch to , magnify the image, and focus manually (p.138). Select the AF mode. While the Live View image is displayed, press the button. (9) Turn the <6> dial to select the AF mode.
Using AF to Focus the subject. 2 Focus Aim the AF point over the subject and press the shutter button halfway. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. the picture. 3 TakeCheck the focus and exposure, then press the shutter button completely to take the picture (p.127). C Y P O u (Face detection) Live Mode: c With the same AF method as the Live mode, human faces are detected and focused.
Using AF to Focus the subject. 2 Focus Press the shutter button halfway and the camera will focus the face covered by the
frame. X When focus is achieved, the AF point will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange. If a face cannot be detected, the AF point < > will be displayed and AF will be executed at the center. the picture. 3 TakeCheck the focus and exposure, then Y P O press the shutter button completely to take the picture (p.127).
Using AF to Focus When you press <9> straight down, it will switch to the Live mode (p.131). You can tilt <9> to move the AF point. If you press <9> straight down again, it will switch back to u (face detection) Live mode. Since AF is not possible with a face detected near the edge of the picture, the
will be grayed out. Then if you press the shutter button halfway, the center AF point < > will be used to focus.
Using AF to Focus Shooting conditions which can make focusing difficult: Low-contrast subjects such as the blue sky and solid-color, flat surfaces. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction. Under a light source whose brightness, color, or pattern keeps changing. Night scenes or points of light. Under fluorescent lighting or when the image flickers. Extremely small subjects. Subjects at the edge of the picture.
Using AF to Focus Quick Mode: f The dedicated AF sensor is used to focus in the One-Shot AF mode (p.95), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation. 1 Select the AF point. Press the button, then use <9> to select the AF point. The AF point selection will change in the direction you tilt the <9>. Pressing <9> straight down selects the center AF point.
Using AF to Focus the subject. 2 Focus Aim the AF point over the subject and press the shutter button halfway. X The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the beeper will sound and the AF point will be displayed in red. (If automatic AF point selection has been set, the AF point which achieves focus will flash in red.) X The Live View image will automatically reappear. AF point Magnifying frame Y P O the picture.
Focusing Manually You can magnify the image and focus precisely manually. 1 Set the lens focus mode switch to . Turn the lens focusing ring to focus roughly. the magnifying frame. 2 Move Use <9> to move the magnifying Magnifying frame frame to the position where you want to focus. Pressing <9> straight down will return the magnifying frame to the image center. Y P O the image. 3 Magnify Press the button. X The image within the magnifying frame will be magnified.
Live View Shooting Cautions Notes About the Live View Image Under low or bright light conditions, the Live View image might not reflect the brightness of the captured image. If the light source within the image changes, the screen might flicker. If this happens, stop and resume the Live View shooting under the actual light source to be used. If you point the camera in a different direction, it might throw off the Live View image’s correct brightness momentarily.
Live View Shooting Cautions Notes About the Shooting Results When you shoot with the Live View function at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. When you shoot continuously with the Live View function for a long period, the camera’s internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images.
Shooting Movies Y P O The Live View image can be recorded to the card as a movie. A movie can be shot with automatic exposure or manual exposure. The movie recording format will be MOV. C Cards which can record movies When shooting movies, use a large-capacity card with a fast writing/reading speed. The CF card’s speed should be 8MB/ sec. or higher. And the SD card should be rated SD Speed Class 6 “ ” or higher.
k Preparing to Shoot Movies Set the camera to record the Live View image as a movie. To shoot still photos, see page 125. 1 Select [Live View/Movie func. set.]. Under the [6] tab, select [Live View/ Movie func. set.], then press <0>. [LV z/k set.]. 2 Select Turn the <5> dial to select [LV z/ k set.], then press <0>. “LV” stands for Live View. [Movies]. 3 Select Turn the <5> dial to select [Movies], Y P O then press <0>. rec. size]. 4 SetFor[Movie details on [Movie rec. size], see C 5 page 151.
k Shooting Movies Autoexposure Shooting When the shooting mode is set to a shooting mode other than , autoexposure control will take effect to fit the scene current brightness. Autoexposure control will be the same for all shooting modes. 1 Set a shooting mode other than . Press the button and turn the <6/5> dial to select a shooting mode other than . Y P O the subject. 2 Focus Before shooting a movie, focus with C AF or manual focus (p.131-138).
k Shooting Movies During movie shooting, you can lock the exposure (AE lock) by pressing the button (p.115). After applying AE lock during movie shooting, you can cancel it by pressing the button. If you set the power switch to and turn the <5> dial, you can set the exposure compensation. The ISO speed will be set automatically within ISO 100-12800. If the [Highest ISO speed] is set to [H1], [H2] or [H3] in [8C.Fn I -3: Set ISO speed range] (p.
k Shooting Movies the shutter speed and 3 Set aperture. Press the shutter button halfway and check the exposure level indicator. Turn the <6> dial to set the shutter speed within 1/30 (1/60) sec. to 1/4000 sec. If you set the power switch to and turn the <5> dial, you can set the aperture. and shoot the movie. 4 Focus The procedure is the same as steps 2 C Y P O and 3 for “Autoexposure Shooting” (p.143). With manual exposure shooting, AE lock and exposure compensation cannot be set.
k Shooting Movies About the ISO speed during manual exposure The ISO speed can be set to [AUTO] (A) or within ISO 100-12800 in 1/3-stop increments. If the ISO speed is set to [AUTO] (A), the ISO speed will be set automatically within ISO 100-12800. (The [8C.Fn I -3: Set ISO speed range] (p.208) setting will not take effect.) Movie shooting as in aperture-priority AE mode (fixed aperture, standard exposure) is then possible.
k Shooting Movies Notes for autoexposure and manual exposure shooting The camera cannot autofocus continuously like a camcorder. During movie shooting, do not point the lens toward the sun. The sun’s heat can damage the camera’s internal components. Even if the [5 Record func+media/folder sel.] menu option has been set to [Rec. separately] or [Rec. to multiple] (p.57), a movie cannot be recorded simultaneously to both the CF card and SD card . If [Rec. separately] or [Rec.
k Shooting Movies B About the Information Display Each time you press the button, the information display will change.
k Shooting Movies Taking Still Photos During Movie Shooting You can take a still photo at anytime by pressing the shutter button completely, even during movie shooting. The still photo will record the entire screen including the semitransparent mask. The still photo will be taken at the exposure setting displayed when you press the shutter button halfway. If a still photo is shot during movie shooting in manual exposure mode, the still photo will be taken with the exposure setting set for the movie.
k Shooting Movies For continuous shooting of still photos during movie shooting, using a high-speed CF card compatible with UDMA transfers is recommended. Setting a smaller image size for still photos and shooting fewer continuous still photos are also recommended. If the drive mode has been set to or and you start shooting a movie, the drive mode will automatically change to (single shooting).
3 Menu Function Settings During movie shooting, you can still set the menu options. Movie shooting functions are listed below. Under the [6] tab with the [Live View/ Movie func. set.] screen, you can set the following functions. AF mode (p.131-137) You can select [Live mode], [u Live mode], or [Quick mode]. Note that the camera cannot focus a moving subject continuously. Grid display With [Grid 1l] or [Grid 2m], you can display grid lines. You can check the camera tilt before shooting.
3 Menu Function Settings Total Movie Recording Time and File Size Per Minute (Approx.) Movie-recording Size Total Recording Time File Size 4GB Card 16GB Card 1920x1080 65 4 12 min. 49 min. 330 MB/min. 1280x720 87 12 min. 49 min. 330 MB/min. 640x480 87 24 min. 1 hr. 39 min. 165 MB/min. After you start shooting a movie, the movie shooting will stop automatically if the file size reaches 4 GB or if the movie time reaches 29 min. 59 sec. To start movie shooting again, press the button.
Movie Shooting Cautions Recording and Image Quality If the attached lens has an Image Stabilizer, the Image Stabilizer will operate at all times even if you do not press the shutter button halfway. The Image Stabilizer may cause the total movie shooting time or the number of possible shots to decrease. If you use a tripod or if the Image Stabilizer is not necessary, you should set the IS switch to <2>. The camera’s built-in microphone will also pick up camera operation noise.
Movie Shooting Cautions Camera’s internal temperature increase and image degradation When you shoot movies at high ISO speeds, noise (horizontal banding, dots of light, etc.) or irregular colors may appear. If you continue to shoot movies for a prolonged period, the camera’s internal temperature will increase. This can degrade the image quality. While not shooting, turn off the power.
Image Playback Y P O This chapter explains how to playback and erase photos and movies, how to view them on a TV screen, and other playback-related functions. C About images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with a computer or whose file name or file format was changed.
x Image Playback Single Image Display 1 Playback the image. Press the button. X The last captured image or last image viewed will appear. the image. 2 Select To playback images starting with the last image, turn the <5> dial counterclockwise. To playback images starting with the first captured image, turn the dial clockwise. Each time you press the button, the display format will change.
x Image Playback B Shooting Information Display FE Microadjustment Exposure compensation amount Protect Voice memo Folder number - File number Flash exposure compensation amount Card Aperture Histogram (Brightness/RGB) Shutter speed/ Recording time AF Microadjustment Metering mode Shooting mode/ Movie/Still photo during movie shooting Color temperature when
is set ISO speed Image size/ Movie-recording format Movie-recording size Frame rate Playback number/ Total images recorded Highlight tone
x Image Playback About the AF Point Display When the [4 AF point disp.] menu option is set to [Enable], the AF point which achieved focus will be displayed in red. If automatic AF point selection was used, multiple AF points might be displayed in red. About the Histogram The brightness histogram display shows the exposure level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The display can be switched with the [4 Histogram] menu option.
x Searching for Images Quickly y Display Multiple Images on One Screen (Index display) Search for images quickly with the index display showing four or nine images on one screen. 1 Î Turn on the index display. During image playback, press the button. X The 4-image index display will appear. The currently-selected image will be highlighted in a blue frame. Press the button again to switch to the 9-image index display.
x Searching for Images Quickly I Jump through Images (Jump display) With the single image display, you can turn the <6> dial to jump through the images. 1 Select the jump method. With the [4 Image jump w/6] menu option, select the desired jump method from [1 image/10 images/ 100 images/Date/Folder/Movies/ Stills], then press <0>. Y P O by jumping. 2 Browse Press the button to playback C Jump method Image location the image. Turn the <6> dial.
u/y Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. 1 Magnified area position Magnify the image. During image playback, press the button. X The image will be magnified. If you hold down the button, the image will continue to be magnified until it reaches the maximum magnification. To reduce the magnification, press the button. If you hold down the button, the magnification will continue to reduce to the single image display. around the image.
b Rotating the Image You can rotate the displayed image to the desired orientation. 1 Select [Rotate]. Under the [3] tab, select [Rotate], then press <0>. the image. 2 Select Turn the <5> dial to select the image to be rotated. You can also select an image on the index display. Y P O the image. 3 Rotate Each time you press <0>, the C image will rotate clockwise as follows: 90° → 270° → 0° To rotate another image, repeat steps 2 and 3. To exit and return to the menu, press the button.
k Enjoying Movies Basically, there are the following three ways to playback the movies you shot. Playback on a TV set (p.170, 171) Use the provided stereo AV cable or HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. You can then playback the captured movies and photos on the TV.
k Enjoying Movies Playback and Editing with a Personal Computer (See the PDF file instruction manual for ZoomBrowser EX/ImageBrowser) The movie files recorded in the card can be transferred to a personal computer and played or edited with ZoomBrowser EX/ImageBrowser (provided software). You can also extract a single frame from a movie and save it as a still photo. To have the movie playback smoothly on a personal computer, the personal computer must be a high-performance model.
k Playing Movies 1 Playback the image. Press the button to playback images. a movie. 2 Select Turn the <5> dial to select an image. With the single-image display, the <1s> icon displayed on the upper left indicates that it is a movie. During the index display, the perforation on the left edge of the image indicates that it is a movie. Movies cannot be played on the index display, so press <0> to switch to the single-image display. Y P O the single-image display, 3 On press <0>.
k Playing Movies Function Exit Playback Description Returns to the single-image display. 7 Play Pressing <0> toggles between play and stop. 8 Slow motion Adjust the slow motion speed by turning the <5> dial. The slow-motion speed is indicated on the upper right. 5 First frame Displays the movie’s first frame. Each time you press <0>, a single previous frame is 3 Previous frame displayed. When you hold down <0>, it will rewind the movie.
X Editing the Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in 1-sec. increments. 1 On the movie playback screen, select [X]. X The editing screen will be displayed. the parts to be edited out. 2 Specify Select either [ ] (Cut beginning) or [ ] (Cut end), then press <0>. Tilt <9> to the left or right to see the previous or next frames. Holding it down will fast forward the frames. Turn the <5> dial to browse frame-by-frame.
3 Slide Show (Auto Playback) You can playback the images in the card as an automatic slide show. 1 Number of images to be played Select [Slide show]. Under the [4] tab, select [Slide show], then press <0>. the images to be played 2 Select back. Turn the <5> dial to select the item shown on the left, then press <0>. [All images/Movies/Stills] Y P O Turn the <5> dial to select one of the following: [jAll images/ kMovies/zStills]. Then press <0>.
3 Slide Show (Auto Playback) the play time and repeat option. 3 SetTurn the <5> dial to select [Set up], then press <0>. For still photos, set the [Play time] and [Repeat] options, then press the button. [Play time] [Repeat] Y P O show. 4 StartTurnthetheslide <5> dial to select [Start], then press <0>. X After [Loading image...] is displayed for a few seconds, the slide show will start. C slide show. 5 QuitTo the quit the slide show and return to the setting screen, press the button.
Viewing the Images on TV You can view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. To playback movies, see page 165. * Depending on the TV set, part of the image displayed might be cut off. Viewing on Non-HD (High-Definition) TV Sets 1 Connect the provided AV cable to the camera. Connect the stereo AV cable to the camera’s terminal.
Viewing the Images on TV Viewing on HD (High-Definition) TV Sets The HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera. Connect the HDMI cable to the camera’s terminal. With the plug’s logo facing the back of the camera, insert it into the terminal. the HDMI cable to the TV set. 2 Connect Connect the HDMI cable to the TV’s HDMI IN port. Y P O Turn on the TV and switch the TV’s video input to select the connected port.
J Protecting Images Protecting the image prevents it from being erased accidentally. Protecting a Single Image 1 Select the image to be protected. Press the button to playback images, then turn the <5> dial to select an image. the image. 2 Protect During image playback, press the button. X When an image is protected, the icon will appear on the top of the screen. To cancel the image protection, press the button again. The icon will disappear.
J Protecting Images If you format the card (p.50), the protected images will also be erased. To protect an image, press and quickly let go of the button. If you hold down the button for approx. 2 sec., a voice memo will be recorded. Images can also be protected individually when the [3 Protect images] menu option is set to [Select images]. Press <0> to protect or unprotect the image. Once an image is protected, it cannot be erased by the camera’s erase function.
K Recording and Playing Voice Memos You can append a voice memo to a captured image. The voice memo will be saved as a WAV sound file having the same file number as the image. The sound can be played back with the camera or provided software. Recording a Voice Memo 1 Select the image to which you want to append a voice memo. Press the button to playback images, then turn the <5> dial to select the image. a voice memo.
K Recording and Playing Voice Memos Playing a Voice Memo When [8C.Fn IV -9: H button function] is set to [2: Play memo (hold: Record memo)] (p.231), the voice memo appended to the image can be played back. 1 Set [8C.Fn IV -9: H button function] to [2: Play memo (hold: Record memo)]. Set this function while referring to page 231. For details on setting a Custom Function, see page 204. the image whose voice 2 Select memo you want to playback.
a Copying Images The images recorded in a card can be copied to the other card. 3 Copying Individual Images 1 Select [Image copy]. Under the [3] tab, select [Image copy], then press <0>. [Sel.Image]. 2 Select Check the copy source and target card’s capacity. Turn the <5> dial to select [Sel.Image], then press <0>. Lowest file number Number of images in folder C Y P O the folder. 3 Select Turn the <5> dial to select the folder containing the image to be copied, then press <0>.
a Copying Images Total images selected the image. 4 Select Turn the <5> dial to select the image to be copied, then press <0>. X The icon will appear on the upper left of the screen. Press the button to display the three-image view. To return to the singleimage display, press the button. To select another image to be copied, repeat step 4. the button. 5 Press After selecting all the images to be copied, press the button. Y P O [OK]. 6 Select Check the target card and press C <0>.
a Copying Images X The copying will start and the progress will be displayed. When the copying is completed, the result will be displayed. Select [OK] to return to the screen in step 2. 3 Copying All Images in a Folder In step 2, select [Sel.n]. Select the source folder to be copied, then the target folder. 3 Copying All Images in a Card Y P O In step 2, select [All image]. All the folders and images in the source card will be copied to the target card.
L Erasing Images You can either select and erase images one by one or erase them in one batch. Protected images (p.172) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased accidentally, protect them. Erasing a RAW+JPEG image will erase both the RAW and JPEG images. Erasing a Single Image 1 Playback the image to be erased. the button.
Changing Image Playback Settings 3 Adjusting the LCD Monitor Brightness You can adjust the brightness of the LCD monitor to make it easier to read. 1 Select [LCD brightness]. Under the [6] tab, select [LCD brightness], then press <0>. the brightness. 2 Adjust While referring to the gray chart, turn Y P O the <5> dial, then press <0>. C To check the image’s exposure, looking at the histogram is recommended (p.158).
Changing Image Playback Settings 3 Setting the Image Review Time You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off]. 1 Select [Review time]. Under the [2] tab, select [Review time], then press <0>. the desired time. 2 SetTurn the <5> dial to select the option, then press <0>. C Y P O If [Hold] is set, the image will be displayed until the auto power off time elapses.
Changing Image Playback Settings 3 Auto Rotation of Vertical Images Vertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer instead of horizontally. The setting of this feature can be changed. 1 Select [Auto rotate]. Under the [5] tab, select [Auto rotate], then press <0>. the auto rotation. 2 SetTurn the <5> dial to select the option, then press <0>.
Sensor Cleaning Y P O The camera has a Self Cleaning Sensor Unit attached to the image sensor’s front layer (low-pass filter) to shake off dust automatically. The Dust Delete Data can also be appended to the image so that the dust spots remaining can be erased automatically by Digital Photo Professional (provided software).
f Automatic Sensor Cleaning Whenever you set the power switch to <1/J> or <2>, the Self Cleaning Sensor Unit operates to automatically shake off any dust on the front of the sensor. Normally, you need not pay attention to this operation. However, you can execute the sensor cleaning at anytime as well as disable it. Cleaning the Sensor Now 1 Select [Sensor cleaning]. Under the [7] tab, select [Sensor cleaning], then press <0>. [Clean nowf].
3 Appending Dust Delete Data Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots. The Dust Delete Data is used by Digital Photo Professional (provided software) to erase the dust spots automatically. Preparation Get a solid-white object (paper, etc.). Set the lens focal length to 50mm or longer.
3 Appending Dust Delete Data a solid-white object. 3 Photograph At a distance of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperturepriority AE mode with an aperture of f/22. Since the image will not be saved, the data can still be obtained even if there is no card in the camera. X When the picture is taken, the camera will start obtaining the Dust Delete Data.
3 Manual Sensor Cleaning Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended. Before cleaning the sensor, detach the lens from the camera. 1 Select [Sensor cleaning]. Under the [7] tab, select [Sensor cleaning], then press <0>. [Clean manually].
3 Manual Sensor Cleaning While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to <2>. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor. Do not insert the blower tip inside the camera beyond the lens mount.
Printing Images Y P O Printing (p.190) You can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “wPictBridge” which is the standard for direct printing. C Digital Print Order Format (DPOF) (p.199) DPOF (Digital Print Order Format) enables you to print images recorded in the card according to your printing instructions such as the image selection, quantity to print, etc.
Preparing to Print The direct printing procedure is done entirely with the camera while you look at the LCD monitor. Connecting the Camera to a Printer 1 Set the camera’s power switch to <2>. the printer. 2 SetForupdetails, see the printer’s instruction manual. Y P O the camera to a 3 Connecting printer Use the interface cable provided with the camera. When connecting the cable plug to the terminal, the cable plug’s icon must face the back of the camera.
Preparing to Print wPictBridge the image. 6 Playback Press the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. C Y P O Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer.
wPrinting The screen display and setting options will differ depending on the printer. Some settings might not be available. For details, see the printer’s instruction manual. Printer-connected icon 1 Select the image to be printed. Check that the icon is displayed on the upper left of the LCD monitor. Turn the <5> dial to select the image to be printed. <0>. 2 Press X The print setting screen will appear. Print setting screen Y P O Sets the printing effects (p.194).
wPrinting QSetting the Paper Size Turn the <5> dial to select the size of the paper loaded in the printer, then press <0>. X The paper type screen will appear. YSetting the Paper Type Turn the <5> dial to select the type of the paper loaded in the printer, then press <0>. When using a Canon printer and Canon paper, read the printer’s instruction manual to check what paper types can be used. X The page layout screen will appear.
wPrinting effects. 4 SetSettheasprinting necessary. If you need not set any printing effects, go to step 5. Turn the <5> dial to select the item on the upper right, then press <0>. If the icon is displayed next to , you can also adjust the printing effect (p.196). Next, turn the <5> dial to select the desired printing effect, then press <0>. Printing Effect Description Y P O EOn The image will be printed according to the printer’s standard colors.
wPrinting the date and file number 5 Set imprinting. Set as necessary. Turn the <5> dial to select , then press <0>. Turn the <5> dial to select the desired setting, then press <0>. of copies. 6 SetSettheasnumber necessary. Turn the <5> dial to select , then press <0>. Turn the <5> dial to select the number of copies, then press <0>. Y P O 7 StartTurnprinting. the <5> dial to select [Print], C then press <0>. X The printing will start. For details on trimming, see page 197.
wPrinting e Adjustment of Printing Effects In step 4 on page 194, select the printing effect. When the icon is displayed next to , press the button. You can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4. Brightness The image brightness can be adjusted. Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast.
wPrinting Trimming the Image Tilt correction You can crop the image and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [Trimming]. 2 Set the trimming frame size, position, and aspect ratio. Y P O The image area within the trimming frame will be printed.
wPrinting Depending on the printer, the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the print. While trimming the image, look at the camera’s LCD monitor. If you look at the image on a TV screen, the trimming frame might not be displayed accurately. Handling Printer Errors If you resolve a printer error (no ink, no paper, etc.
W Digital Print Order Format (DPOF) You can set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) Setting the Printing Options 1 Select [Print order]. Under the [3] tab, select [Print order], then press <0>. [Set up]. 2 Select Turn the <5> dial to select [Set up], Y P O then press <0>. C3 Set the option as desired. [Print type] Set the [Print type], [Date], and [File No.].
W Digital Print Order Format (DPOF) Option Print type Description K L K L Standard Prints one image on one sheet. Index Multiple, thumbnail images are printed on one sheet. Both Prints both the standard and index prints. On Date Off File number On Off [On] imprints the recorded date on the print. [On] imprints the file No. on the print. the setting. 4 ExitPress the <7> button. Y P O X The print order screen will reappear. Next, select [Sel.
W Digital Print Order Format (DPOF) Print Ordering Sel.Image Select and order images one by one. Press the button to display the three-image view. To return to the singleimage display, press the button. After completing the print order, press the button to save the print order to the card. Quantity [Standard] [Both] Press <0> and a print order for 1 copy of the displayed image will be placed. Then turn the <5> dial to set the number of copies (up to 99) to be printed for that image.
W Direct Printing with DPOF With a PictBridge printer, you can easily print images with DPOF. 1 Prepare to print. See page 190. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [3] tab, select [Print order]. 3 Select [Print]. Y P O [Print] will be displayed only if the camera is connected to the printer and printing is possible. 4 Set the [Paper settings]. (p.192) C Set the printing effects (p.194) if necessary. 5 Select [OK].
Customizing the Camera Y P O To suit your shooting preferences, you can fine-tune the camera’s functions, save the camera settings to a card or register them to the camera.
3 Setting Custom Functions [8]. 1 Select Turn the <6> dial to select the [8] tab. the group. 2 Select Turn the <5> dial to select C.Fn I IV, then press <0>. Custom Function No. the Custom Function 3 Select number. Turn the <5> dial to select the Custom Function No., then press <0>. the setting as desired. 4 Change Turn the <5> dial to select the Y P O setting (number), then press <0>. Repeat steps 2 to 4 if you want to set other Custom Functions.
3 Custom Functions k Movie shooting z LV shooting C.Fn I: Exposure 1 Exposure level increments 2 ISO speed setting increments 3 Set ISO speed range 4 Bracketing auto cancel 5 Bracketing sequence 6 Number of bracketed shots 7 Spot metering link to AF point k p.208 In M movie mode k In M movie mode k p.
3 Custom Functions C.Fn II: Image/Flash exposure/Display 1 Long exposure noise reduction 2 High ISO speed noise reduction 3 Highlight tone priority 4 Auto Lighting Optimizer 5 E-TTL II flash metering 6 Shutter curtain sync. 7 Flash firing 8 Viewfinder info. during exposure 9 LCD panel illumination during Bulb 10 INFO. button when shooting C.Fn III: Autofocus/Drive z LV shooting k Movie shooting k (Still photo) p.214 k (Still photo) k k p.215 k k k p.
3 Custom Functions 13 AF point display during focus 14 AF point brightness 15 AF-assist beam firing 16 Orientation linked AF point 17 Mirror lockup 18 Continuous shooting speed 19 Limit continuous shot count With f With f p.225 With f With f p.226 k p.227 Shutter button/AF-ON button 2 AF-ON/AE lock button switch k p.
3 Custom Function Settings Custom Functions are organized in four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image/Flash exp (exposure)/Disp (Display), C.Fn III: Autofocus/Drive, and C.Fn IV: Operation/Others. Note that some Custom Function numbers differ from the EOS-1D Mark III’s Custom Functions. C.Fn I: Exposure C.Fn I -1 Exposure level increments 0: 1/3-stop set 1/3-stop compensation 1: 1-stop set 1/3-stop compensation Sets full-stop increments for the shutter speed and aperture.
3 Custom Function Settings C.Fn I -4 Bracketing auto cancel 0: On The AEB and WB-BKT settings will be canceled if you set the power switch to <2> or clear the camera settings. AEB will also be canceled when bulb exposure is set or the flash is ready to fire. 1: Off The AEB and WB-BKT settings will be retained even when the power switch is set to <2>. (When the flash is ready, AEB will be canceled. However, the AEB amount will be retained in memory.) C.
3 Custom Function Settings C.Fn I -7 Spot metering link to AF point 0: Disable (use center AF point) 1: Enable (use active AF point) If [8C.Fn III -10: Selectable AF point] (p.223) is set to [1: 19 points], [2: 11points], [3: Inner 9 points] or [4: Outer 9 points], spot metering linked to the selected AF point is possible. With automatic AF point selection, spot metering will be at the viewfinder center. If C.Fn III -10 is set to [0: 45 points], spot metering at the center will be set even if C.
3 Custom Function Settings C.Fn I -10 Select usable metering modes Disable: All the metering modes (q: Evaluative, w: Partial, r: Spot, e: Center-weighted average) will be selectable. Enable: Only the metering modes set with [Register] will be selectable. Register: To make a metering mode unselectable, uncheck the checkmark . After entering the settings, select [Apply]. C.Fn I -11 Exposure mode in manual exposure You can set the metering mode to be used in the manual exposure mode.
3 Custom Function Settings C.Fn I -14 Apply shooting/metering mode While holding down the (AE lock) button, you can switch to the registered setting (shooting mode, metering mode, shutter speed, aperture, or exposure compensation). Disable: Pressing the button will lock the exposure (AE lock). Enable: By holding down the button, you can instantly switch to the registered setting.
3 Custom Function Settings C.Fn I -16 AE Microadjustment Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct exposure from being achieved. You can fine adjust the camera’s standard exposure level. The adjustment can help if the camera’s “standard exposure” always seems to be underexposed or overexposed. With setting 1 selected, press the button to display the adjustment screen.
3 Custom Function Settings C.Fn II: Image/Flash exposure/Display C.Fn II -1 Long exposure noise reduction 0: Off 1: Auto For 1 sec. or longer exposures, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases. 2: On Noise reduction is performed for all exposures of 1 sec. or longer. The [On] setting may be effective for noise that cannot be detected or reduced with the [Auto] setting.
3 Custom Function Settings C.Fn II -3 Highlight tone priority 0: Disable 1: Enable Improves the highlight detail. The dynamic range is expanded from the standard 18% gray to bright highlights. The gradation between the grays and highlights becomes smoother. With setting 1, noise may be slightly more pronounced than usual. With setting 1, the settable ISO speed range will be 200 - 12800. Also, will be displayed on the top LCD panel and in the viewfinder. C.
3 Custom Function Settings C.Fn II -6 Shutter curtain sync. 0: 1st-curtain synchronization 1: 2nd-curtain synchronization The flash fires immediately before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night. This Custom Function can be used to obtain 2nd-curtain sync effects even with EX-series Speedlites which do not have this feature (except Speedlite 270EX).
3 Custom Function Settings C.Fn II -9 LCD panel illumination during Bulb 0: Off 1: On during Bulb If the LCD panel illumination is on (p.116) and you take a bulb exposure, the illumination will continue until the bulb exposure ends. This is convenient when you are taking a bulb exposure in low light and want to check the exposure time. C.Fn II -10 INFO. button when shooting You can change what is displayed on the LCD monitor when you press the button while the camera is ready to shoot.
3 Custom Function Settings C.Fn III: Autofocus/Drive C.Fn III -1 USM lens electronic MF The USM lens electronic MF can be enabled or disabled when you use any of the following lenses. EF50mm f/1.0L USM, EF85mm f/1.2L USM, EF85mm f/1.2L II USM, EF200mm f/1.8L USM, EF300mm f/2.8L USM, EF400mm f/2.8L USM, EF400mm f/2.8L II USM, EF500mm f/4.5L USM, EF600mm f/4L USM, EF1200mm f/5.6L USM, EF28-80mm f/2.8-4L USM 0: Enable after One-Shot AF After focus is achieved in One-Shot AF, electronic MF is enabled. If C.
3 Custom Function Settings 2: Release/Drive speed priority For the first shot, shutter release is given priority over focusing the subject. During continuous shooting, the continuous shooting speed is given priority more than with setting 1. 3: Release/Tracking priority For the first shot, shutter release is given priority over focusing the subject. For the second and following shots during continuous shooting, focus-tracking of the subject is given priority. C.
3 Custom Function Settings C.Fn III -6 Lens AF stop button function * The AF stop button is provided only on super telephoto IS lenses. 0: AF stop 1: AF start AF operates only while the button is pressed. While you hold down the button, AF will not work on the camera. 2: AE lock When the button is pressed, AE lock is applied. Convenient when you want to focus and meter at different parts of the picture.
3 Custom Function Settings C.Fn III -7 AF Microadjustment Normally, this adjustment is not required. Do this adjustment only if necessary. Note that doing this adjustment may prevent correct focusing from being achieved. You can make fine adjustments for the AF’s point of focus. It can be adjusted in ±20 steps (-: Forward / +: Backward). The adjustment amount of one step varies depending on the maximum aperture of the lens.
3 Custom Function Settings C.Fn III -8 AF expansion with selected point During manual AF point selection, it is possible to activate the AF points surrounding the selected AF point for AF. This function works in both the One-Shot AF and AI Servo AF modes. Convenient when it is difficult to track a moving subject with just one manually-selected AF point. If the manually-selected AF point cannot focus, focusing will be done with the expanded AF points.
3 Custom Function Settings C.Fn III -9 Multi-controller while metering 0: Off 1: AF point selection During viewfinder shooting while the metering is active, you can select the AF point directly with <9> instead of pressing the button first. C.Fn III -10 Selectable AF point You can change the number of manually-selectable AF points. During automatic AF point selection, all 45 AF points will be selectable regardless of the setting below.
3 Custom Function Settings C.Fn III -11 Switch to registered AF point You can instantly switch to the registered AF point with <9> or the button while the metering timer is active. The AF will operate when the switch is made. 0: Disable 1: Switch with <9> By pressing <9>, you can switch to the registered AF point. Press it again to switch to the previous AF point. 2: Only while is pressed You can switch to the registered AF point only while you hold down the button.
3 Custom Function Settings C.Fn III -13 AF point display during focus 0: On 1: Off The AF point will not light in red other than during AF point selection. 2: On (when focus achieved) During AF, the manually-selected AF point will no longer light faintly. After AF starts, the AF point will light only when it achieves focus. C.Fn III -14 AF point brightness 0: Normal 1: Brighter Makes the AF point light up brighter in red. C.
3 Custom Function Settings C.Fn III -16 Orientation linked AF point You can either use the same AF point or a different AF point for vertical and horizontal shooting. 0: Same for both vertical/horizontal The same AF point is used for both vertical and horizontal shooting. 1: Select different AF points A different AF point can be set separately for vertical and horizontal shooting. The camera’s orientation is detected automatically and the set AF point switches automatically.
3 Custom Function Settings C.Fn III -19 Limit continuous shot count Disable: Continuous shooting is not limited to any number of shots. Continuous shooting will be possible up to the current maximum burst displayed. Enable: The continuous shooting will be limited to the number of shots set with [Register] after which the shooting will stop automatically. Register: The continuous shot count can be limited between 2 to 99. After entering the settings, select [Apply]. C.Fn IV: Operation/Others C.
3 Custom Function Settings C.Fn IV -3 Quick Control Dial in metering The Quick Control Dial’s function while the metering is active can be changed. 0: Exposure compensation/Aperture 1: AF point selection You can select the AF point directly with the <5> dial without first pressing the button. While metering is active, turning the <5> dial will select a horizontal AF point. Automatic selection cannot be selected. However, if C.Fn III -12-2 has also been set, automatic selection can be selected.
3 Custom Function Settings C.Fn IV -4 Assign SET button You can assign a frequently-used function to <0>. Press <0> when the camera is shooting-ready. 0: Normal (disabled) 1: White balance While looking at the rear LCD panel, you can change the white balance. 2: Image size While looking at the rear LCD panel, you can change the card and image size. 3: ISO speed While looking at the top LCD panel or in the viewfinder, you can change the ISO speed. 4: Picture Style The Picture Style screen will appear.
3 Custom Function Settings C.Fn IV -6 Dial direction during Tv/Av 0: Normal 1: Reverse direction The dial’s turning direction for setting the shutter speed and aperture can be reversed. In the manual exposure mode, the direction of the <6> and <5> dials will be reversed. In other shooting modes, the <6> dial will be reversed. The <5> dial’s turning direction will be the same for the manual exposure mode and exposure compensation. C.
3 Custom Function Settings C.Fn IV -9 H button function 0: Protect (hold: Record memo) When you hold down the button for 2 sec., you can start recording a voice memo. When you let go of the button, the voice memo recording will stop. 1: Record memo (Protect: Disabled) When you press the button, you can start recording a voice memo immediately. When you let go of the button, the voice memo recording will stop. To protect an image, use the [3 Protect images] menu option.
3 Custom Function Settings C.Fn IV -11 Start movie shooting 0: Default (from LV) 1: Quick start ( button) If the [6 Live View/Movie func. set.] menu option has been set to enable movie shooting (p.142), press the button to start shooting a movie immediately while the camera is ready to shoot. C.Fn IV -12 Focusing Screen If you change the focusing screen, change this setting to match the focusing screen type. This is to obtain the correct exposure.
3 Custom Function Settings C.Fn IV -13 Timer length for timer How long the function setting remains in effect after you let go of the respective button can be changed. Disable: The timer length is set to the default. Enable: The timer length is set to the time set with [Register]. Register: You can set the 6-sec. and 16-sec. timer length and the timer length after the shutter release. The timer length can be set to 0 sec. to 59 sec. or 1 min. to 60 min. After entering the settings, select [Apply].
3 Custom Function Settings C.Fn IV -15 Add aspect ratio information During Live View and movie shooting, vertical lines corresponding to the aspect ratio will be displayed. You can thereby simulate still photo framing for medium- and large-format film sizes such as 6x6 cm, 6x4.5 cm, and 4x5 in. This aspect ratio information will be appended automatically to the captured image. (The image will not be saved to the card as a cropped image.
3 Registering and Applying Custom Function Settings You can register up to three sets of Custom Function settings. You can register a different set of Custom Function settings for different shooting situations such as sports, snapshots, and landscapes. You can then instantly apply a registered set of Custom Function settings. Registering Custom Function Settings 1 Select [C.Fn setting register/ apply]. Under the [8] tab, select [C.Fn setting register/apply], then press <0>. Y P O [Register].
3 Registering and Applying Custom Function Settings The settings for [8C.Fn I -16: AE Microadjustment], [8C.Fn I -17: FE Microadjustment], [8C.Fn III -7: AF Microadjustment], and [8C.Fn IV 12: Focusing Screen] will not be included in the registered Custom Function settings. To view the registered Custom Function settings, select [Confirm settings]. The numbers of options changed from the default setting are displayed in blue. Also, non-numerical settings are displayed by a blue [*].
3 Registering My Menu Under the My Menu tab, you can register up to six menu options and Custom Functions whose settings you change frequently. 1 Select [My Menu settings]. Under the [9] tab, select [My Menu settings], then press <0>. [Register]. 2 Select Turn the <5> dial to select [Register], then press <0>. the desired items. 3 Register Turn the <5> dial to select the item, C Y P O then press <0>. On the confirmation dialog, select [OK] and press <0> to register the item.
3 Saving and Loading Camera Settings The camera’s shooting modes, menus, Custom Functions, and other camera settings can be saved in the card as a camera settings file. When this file is loaded by the camera, the saved camera settings will be applied. Convenient when you want to load the camera settings from a different EOS-1D Mark IV body and set the camera in the same way. Or you can save and load different camera settings for different shooting situations.
3 Saving and Loading Camera Settings Saved Settings Shooting functions Shooting mode + setting, ISO speed, AF mode, AF point, Metering mode, Drive mode, Exposure compensation amount, Flash exposure compensation amount Menu functions [1] White balance, Custom WB registration, WB SHIFT/BKT, Color space, Picture Style, Peripheral illumination correction [2] JPEG quality, Image size, Review time, Beep, Release shutter without card, External Speedlite control (Flash function settings) [4] Highlight alert, AF po
3 Registering and Applying Basic Camera Settings You can set the basic settings of major functions such as the shooting mode, AF mode, metering mode, and drive mode and register them in the camera. This is convenient when you want to instantly switch to frequently-used shooting settings. Registering Basic Settings 1 Select [Regist/apply basic settings]. Under the [7] tab, select [Regist/apply basic settings], then press <0>. [Register]. 2 Select Turn the <5> dial to select [Register], then press <0>.
Reference Y P O This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
Function Availability Table o: Set automatically k: User selectable Function Image size ISO speed Viewfinder Shooting : Not selectable/Disabled z LV Shooting k Movie Shooting d s f a Bulb JPEG k k k k k k RAW k k k k k k RAW+JPEG k k k k k k Auto k k k k k k k (Still photo) Manual k k k k k k Enabled in M movie mode Standard k k k k k k k Portrait k k k k k k k Landscape k k k k k k k Neutral k k k k k k Faithful k k k k k
Function Availability Table o: Set automatically k: User selectable Viewfinder Shooting Function AF d s f a Bulb One-Shot k k k k k AI Servo k k k k k Auto k k k k k Manual k k k k k AF point selection Exposure Drive z LV Shooting k Movie Shooting With f With f Live mode k u Live mode k k k Before shooting starts o With c Quick mode Metering : Not selectable/Invalid Evaluative k k Partial k k Spot k k Center-weighted average k k Program shift k
System Map ST-E2 270EX 430EX II 580EX II Macro Ring Lite MR-14EX Macro Twin Lite MT-24EX Bundled Accessories Dioptric Adjustment Lenses Eg Anti-Fog Eyepiece Eg Eyecup Eg Wide Strap L6 C Y P O Cable protector CR2025 lithium battery Angle Finder C Hand Strap E1 EOS DIGITAL Software Instruction Solution Disk Manual Battery Pack LP-E4 Focusing Screen Ec 244 AC Adapter Kit ACK-E4 Battery Charger LC-E4 Car Battery Cable CB-570
System Map Wireless Controller LC-5 Remote Switch RS-80N3 Timer Remote Controller TC-80N3 EF lenses External microphone Y P O HDMI Cable HTC-100 Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A* Stereo AV Cable AVC-DC400ST Interface Cable IFC-200U C Interface Cable IFC-500U TV/Video USB external media USB GPS unit Wireless LAN access point Wireless LAN adapter Ethernet port Original Data Security Kit OSK-E3 CF card USB port Personal computer PC card slot Windows Vista Windows XP
B Checking Camera Settings With [8C.Fn II -10: INFO. button when shooting] (p.217) set to [1: Displays camera settings], pressing the button while the camera is ready to shoot will display image-related function settings. Display the camera settings. While the camera is ready to shoot, press the button. Picture Style (p.66) Picture Style parameters (p.67) Color space (p.92) WB correction (p.79)/ BKT setting (p.80) Y P O Transfer of images failed* C FE Microadjustment (p.
3 Checking the Battery Information You can check the battery’s condition on a menu screen. Select [Battery info.]. Under the [6] tab, select [Battery info.], then press <0>. The model of the battery or household power source (sold separately) being used is displayed. Next to the battery check (p.35), the remaining battery capacity is displayed in 1% increments. Y P O Shots taken with the current battery. The number is reset when the battery is recharged.
Replacing the Date/Time Battery The date/time (back-up) battery’s service life is approx. 5 years. If the date/time is reset when camera is turned on, replace the back-up battery with a new CR2025 lithium battery as described below. The date/time setting will also be reset, so be sure to set the correct date/time (p.49). 1 Set the power switch to <2> and remove the battery pack. The back-up battery is on the ceiling of the battery compartment. the back-up battery 2 Remove cover.
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide on pages 249 to 255. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power-Related Problems The battery cannot be recharged with the battery charger provided. Do not recharge any battery pack other than a genuine Canon Battery Pack LP-E4. The battery charger’s lamp blinks in red. The charger’s lamp blinks three times. See pages 30 and 31.
Troubleshooting Guide The camera turns off by itself. Auto power off is in effect. If you do not want auto power off to take effect, set [5 Auto power off] to [Off]. Shooting-Related Problems The lens cannot be attached. The camera cannot be used with EF-S lenses (p.39). The card cannot be used. If a card error message is displayed, see page 38 or 256. Y P O No images can be shot or recorded. The card is not properly inserted (p.36). If you are using an SD card, set the write-protect switch upward (p.
Troubleshooting Guide A darker exposure was set with exposure compensation, but the image looks bright. Set [8C.Fn II -4: Auto Lighting Optimizer] to [3: Disable]. If it is set to [Standard/Low/Strong], the image might still come out bright even if you set a darker exposure with manual exposure, exposure compensation, or flash exposure compensation (p.81, 215). The maximum burst during continuous shooting is lower. Set [8C.
Troubleshooting Guide The flash always fires at full output. If you use a flash unit other than an EX-series Speedlite, the flash will always be fired at full output (p.120). When the [Flash metering mode] flash Custom Function is set to [TTL (autoflash)], the flash will always be fired at full output (p.124). Flash exposure compensation cannot be set. If flash exposure compensation has already been set with the Speedlite, flash exposure compensation cannot be set with the camera.
Troubleshooting Guide Movies cannot be shot with manual exposure. Set [LV z/k set.] to [Movies] and set the shooting mode to (manual exposure) (p.142, 144). The movie shooting terminates by itself. If the card’s writing speed is slow, movie shooting may stop automatically. If you use a CF card, use one with a read/write speed of at least 8 MB per sec. If you use an SD card, use one with SD Speed Class 6 “ ” or higher. To find out the card’s read/write speed, see the card manufacturer’s Web site, etc.
Troubleshooting Guide When the movie is played, camera operation noise can be heard. If you operate the camera’s dial or lens during movie shooting, the respective operation noise will also be recorded. Using an external microphone (commercially available) is recommended (p.153). Display & Operation Problems The LCD monitor does not display a clear image. If the LCD monitor is dirty, use a soft cloth to clean it. In low or high temperatures, the LCD monitor display may seem slow or might look black.
Troubleshooting Guide The file numbering does not start from 0001. If you use a card which already has images recorded, the file numbering might start from the last image in the card (p.88). The shooting date and time displayed is incorrect. The correct date and time has not been set (p.49). No image appears on the TV screen. Make sure the stereo AV cable or HDMI cable’s plug is connected all the way in (p.170, 171). Set the video OUT format (NTSC/PAL) to the same video format as the TV (p.170).
Error Codes Error No. If there is a problem with the camera, an error message will appear. Follow the onscreen instructions. Countermeasures No. 01 02 Error Message & Solution Communications between the camera and lens is faulty. Clean the lens contacts. Y P O Î Clean the electrical contacts on the camera and lens and use a Canon lens. (p.13, 16) Card * cannot be accessed. Reinsert/change card * or format card * with camera.
Specifications • Type Type: Recording media: Image sensor size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera CF card (Type I or II, UDMA-compatible), SD memory card, SDHC memory card * With Wireless File Transmitter WFT-E2 II A/B/C/D or WFT-E2/E2A (with firmware Ver. 2.0.0 or higher), recording to USB external media possible 27.9 x 18.6 mm Canon EF lenses (except EF-S lenses) (35mm-equivalent focal length is approx.1.
Specifications • Image Processing Picture Style: White balance: Noise reduction: Automatic image brightness correction: Highlight tone priority: Lens peripheral illumination correction: Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Def.
Specifications • Exposure Control Metering modes: 63-zone TTL full-aperture metering • Evaluative metering (linkable to any AF point) • Partial metering (approx. 13.5% of viewfinder at center) • Spot metering (approx. 3.8% of viewfinder at center) • Center-weighted average metering Metering range: EV 0 - 20 (at 23°C/73°F with EF50mm f/1.
Specifications • External Speedlite Compatible flash: Flash metering: Flash exposure compensation: FE lock: PC terminal: Standard flash exposure level adjustment: EX-series Speedlite (Functions settable with the camera) E-TTL II autoflash ±3 stops in 1/3- or 1/2-stop increments Provided Provided FE Microadjustment possible • Live View Shooting Focusing: Metering modes: Metering range: Grid display: Live mode, Face detection Live mode (Contrast detection), Quick mode (Phase-difference detection) Manual
Specifications ISO speed: Sound recording: Grid display: During autoexposure shooting: Automatically set During manual exposure shooting: Auto (ISO Auto), manual setting within ISO 100 - 12800 (1/3- or whole-stop increments) and expandable to H1 (ISO 25600), H2 (ISO 51200), H3 (ISO 102400) Built-in monaural microphone External stereo microphone terminal provided Two types • LCD Monitor Type: Monitor size and dots: Coverage: Brightness adjustment: Interface language: TFT color liquid-crystal monitor 3-i
Specifications • Custom Functions Custom Functions: C.Fn setting registration: Save camera settings: Register basic camera settings: My Menu registration: Copyright information: 62 under C.
Specifications • Dimensions and Weight Dimensions (W x H x D): 156 x 156.6 x 79.9 mm / 6.1 x 6.2 x 3.1 in. Weight: Approx. 1180 g / 41.6 oz. (body only) • Operation Environment Working temperature range: 0°C - 45°C / 32°F - 113°F Working humidity: 85% or less • Battery Pack LP-E4 Type: Rated voltage: Battery capacity: Dimensions (W x H x D): Weight: Rechargeable lithium ion battery 11.1 V DC 2300 mAh 68.4 x 34.2 x 92.8 mm / 2.7 x 1.3 x 3.7 in. Approx. 180 g / 6.3 oz.
Trademarks Adobe is a trademark of Adobe Systems Incorporated. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other countries. CompactFlash is a trademark of SanDisk Corporation. The SDHC logo is a trademark. HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or registered trademark of HDMI Licensing LLC.
Use of genuine Canon accessories is recommended This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of nongenuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Safety Warnings Follow these safeguards and use the equipment properly to prevent injury, death, and material damage. Preventing Serious Injury or Death • To prevent fire, excessive heat, chemical leakage, and explosions, follow the safeguards below: - Do not use any batteries, power sources, and accessories not specified in this booklet. Do not use any home-made or modified batteries. - Do not short-circuit, disassemble, or modify the battery pack or back-up battery.
• If you drop the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disassemble or modify the equipment. High-voltage internal parts can cause electrical shock. • Do not look at the sun or an extremely bright light source through the camera or lens. Doing so may damage your vision. • Keep the camera from the reach of small children. The neck strap can accidentally choke the child.
Digital Camera Model DS126211 Systems This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital devices, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS — This manual contains important safety and operating instructions for Battery Charger LC-E4. 2. Before using the charger, read all instructions and cautionary remarks on (1) the charger, (2) the battery pack, and (3) the product using the battery pack. 3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E4. Other types of batteries may burst, causing personal injury and other damage. 4. Do not expose the charger to rain or snow. 5.
Index Index 10-sec. or 2-sec. delay .................102 1280x720 ......................................151 1920x1080 ....................................151 1st-curtain sync.............................122 2nd-curtain sync ...........................122 4- or 9-image index display...........159 640x480 ........................................151 A About servicing .............................265 AC Adapter Kit ................................33 AC power ........................................
Index Color temperature setting ...............78 Color tone ...............................68, 196 Compression rate............................63 Continuous......................................88 Continuous shooting .....................101 Contrast ..................................68, 196 Cool tone (printing) .......................194 Copyright information......................90 Cord ..........................3, 163, 170, 171 Cross-type focusing ........................99 Custom Functions ...........
Index Focusing AF mode.....................................94 AF point display........................158 AF point selection.......................97 AF-assist beam ........................225 Beeper........................................52 Difficult-to-focus subjects....100, 135 Live View shooting ...........131, 138 Manual focusing ...............100, 138 Out of focus ......................100, 135 Recompose ................................95 Focusing screen ...........................
Index LCD monitor..............................13, 17 Brightness adjustment ..............180 Image playback ........................156 Menu screen.........................44, 46 Shooting settings display....23, 217 LCD panel .................................21, 22 Illumination ...............................116 Lens Attaching/Detaching ...................39 Peripheral illumination correction....................................82 Live View shooting ........................125 Exposure simulation .........
Index NTSC ....................................151, 170 Number of AF points.....................223 O ONE SHOT (One-Shot AF).............95 One-Shot AF...................................95 P P (Program AE) ............................106 PAL .......................................151, 170 Paper settings (printing)................192 Partial metering.............................104 PC terminal ...................................120 Peripheral illumination correction....82 Personal white balance...........
Index 0 button ........................................44 Sharpness.......................................68 Shooting information display...........................128, 148, 157 Shooting mode................................21 Aperture-priority AE ..................110 Bulb ..........................................116 Manual exposure ......................112 Program AE ..............................106 Shutter-priority AE ....................108 Shooting settings display ........
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada CANON CANADA INC. CALGARY OFFICE 2828, 16th Street, N.E.