User Manual

Transferring Images Individually

If transfer fails, the <Y> lamp on the

camera blinks in red. In this case, press the

<M> button, select [Communication

settings] under the [53] tab, and press

<0>. When the screen shown on the left is

displayed, check the error code number and

see page 118 to eliminate the cause of the

error.

Once the cause of the error is eliminated, the images whose transfer

previously failed will be re-transferred automatically. With this option

activated, transfer is attempted again automatically after failure,

whether automatic transfer is used or captured images are transferred

via FTP. Note that when you cancel image transfer, or turn off the

camera, the image will not be re-transferred automatically. See page 48

and transfer the image.

Auto Retry if Transfer Fails

By setting the power saving function on the [Function settings] screen

(p.114), you can log off the transmitter from the FTP server after transfer

and stop the LAN connection.