User Manual

Using the Transmitter with WFT Server

Select [Confirm settings].

 The settings are displayed.

Check the settings.

 Turn the <5> dial to display other

screens.

 Write down the IP address and SSID.

 The SSID is the same for all the

cameras.

 After checking the settings, press the

<M> button to exit the

confirmation dialog.

 Check settings on the master camera and all slave cameras in the

same way.

IP addresses assigned to cameras end in 1 - 11, as in 192.168.1.1 -

192.168.1.11.

For this reason, assign computer IP addresses that end in a number

higher than 11, as in 192.168.1.12.

IP Addresses Assigned to Computers