EOS Utility Ver.3.4 for Macintosh Instruction Manual

44
1
2
3
4
Introduction
Contents
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Focusing Using FlexiZone-Multi
This AF mode allows focus to be easily achieved on moving subjects.
You can adjust focus over a wide area, and also divide the area into
zones for focusing.
1
Select [FlexiZone-Multi] from the [Focus] list box.
 An AF point appears.
 You can click in the window to select an AF zone.
To cancel a selected zone, select [FlexiZone-Multi] again from
the [Focus] list box.
 You can set continuous AF to on/off with the [Continuous AF]
checkbox on cameras other than . When shooting
movies, the [Continuous AF] checkbox changes to the [Movie
servo AF] on/off checkbox. With , the [Movie servo AF]
checkbox is displayed when shooting movies, allowing movie
servo AF on/off to be selected.
 You can switch between showing and hiding the AF point by
clicking the [ ] button.
2
Click the [ON] button on the [Focus] list box.
 AF is executed.
 When focus is achieved, the camera makes a beeping sound
and the AF point turns green.
 If focus is not achieved, the AF point turns red.
 The number of AF points and zones depend on the selected
aspect ratio and the image being shot (still image/movie).
7D Mk II
80D
REBEL T6S
760D
REBEL T6i
750D
80D
80D
You can check the depth of field and exposure in the [Remote Live View
window].
Click the [ON] button.
 The aperture is stopped down (exposure simulation) to the
aperture set in the capture window (p.86).
Checking the Depth of Field and Exposure