Wireless File Transmitter WFT-E6
Table Of Contents
- Cover
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
91
Using the Transmitter with WFT Server
1
Set up the slave cameras.
Perform steps 1 to 6 on page 84 for
the cameras to use as slaves. When
the next screen is displayed, the
slave cameras are ready.
2
Set up the master camera.
Perform steps 1 to 5 on page 84 for
the camera to use as the master, then
select [Master].
Select [OK] and press <0> to go to
the next screen.
3
Select [Manual connect].
Select [OK] and press <0> to go to
the next screen.
4
Select connection method.
Select the wireless LAN ad hoc mode
supported by the computer.
Select [OK] and press <0> to go to
the next screen.
5
Specify the channel.
When selecting [Manual setting],
specify the same channel on the
master camera, slave cameras, and
computer.
Select [OK] and press <0> to go to
the next screen.
Connecting the Master and Slave Cameras