Wireless File Transmitter WFT-E6
Table Of Contents
- Cover
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
99
Synchronizing the Time
5
Select [Wireless].
Select [OK] and press <0> to go to
the next screen.
6
Set up the master camera.
Select [Master], then press <0>.
Select [OK] and press <0> to go to
the next screen.
When the next screen is displayed,
the master camera is ready. Go to
step 7 to set up the slave cameras.
7
Set up the slave cameras.
After configuring the slave camera
settings following steps 1 to 5 on the
preceding page, select [Slave].
Select [OK] and press <0> to go to
the next screen.
Select [OK] on the displayed screen.
To set the time on multiple slave
cameras, follow these steps on all
slave cameras.
On the master camera’s LCD monitor,
the number of slave cameras
detected is displayed.