Specifications

For more customization, many of Canon’s EOS cameras are compatible
with a vast choice of eyecups, diopter lenses and more for greater
versatility in a number of shooting situations.
EOS SYSTEM ACCESSORIESEOS SYSTEM ACCESSORIES
Shooting Accessories
4140
Compatibility
Compatibility
Compatibility
Eyecups, Rubber Frames and Dioptric Adjustment Lenses
Eyecup Eb
EOS ELAN, Rebel
series**, 700, 750,
850, 5D, 30D, 20D,
20Da, 10D, D60, D30
Eyecup Ec-II
EOS-1Ds Mark II, 1Ds,
1D Mark II
N,1D Mark
II, 1D, D2000, 1
V HS,
1
V, 1N RS, 1N, 1
Eyecup Ed
EOS-3, A2/ A2
E,
ELAN 7 series,
ELAN II/ II
E
Eyecup Ef
EOS Digital Rebel
XTi, Digital Rebel XT,
EOS Digital Rebel,
Rebel T2, Ti, K2
Anti-Fog Eyepiece Ec
EOS-1Ds Mark II, 1Ds,
1D Mark II
N, 1D Mark
II, 1D, D2000, 1
V HS,
1
V, 1N RS, 1N, 1
Anti-Fog Eyepiece Ed
EOS-3, A2/ A2
E,
ELAN 7 series,
ELAN II/ II
E
Rubber Frame Eb*
EOS 10S, ELAN, 5D,
30D, 20D, 20Da,
10D, D60, D30,
Rebel series**
Rubber Frame Ec*
EOS-1Ds Mark II, 1Ds,
1D Mark II
N, 1D Mark
II, 1D, D2000, 1
V HS,
1
V, 1N RS, 1N, 1
Rubber Frame Ef*
EOS Digital Rebel,
Rebel T2, Ti, K2
Dioptric Adjustment
Lens E
All EOS SLRs except:
EOS-3, A2/ A2
E,
ELAN 7 series, ELAN
II/II
E, IX, IX Lite
Dioptric Adjustment
Lens Ed
EOS-3, A2/ A2
E,
ELAN 7 series,
ELAN II/ II
E
Eyecup Ed-E
EOS-3, A2/ A2
E,
ELAN 7 series,
ELAN II/ II
E
Eyepiece Extender
EP-EX15
All EOS SLRs except:
EOS-3, A2/ A2
E,
ELAN 7 series, ELAN
II/II
E, IX, IX Lite
Angle Finder C
All EOS SLRs
Dioptric Adjustment Lens
These Dioptric Adjustment lenses
provide near- and far-sighted users
a clear viewfinder image without
the use of eyeglasses. Available in
ten types from +3 to -4 dpt to match
many types of eyesight, each
Dioptric Adjustment Lens fits into the
eyepiece holders of the appropriate
EOS model for convenient use and
a comfortable fit.
Eyecup Ed-E
This large eyecup, designed for the
EOS-3, A2/A2E, ELAN 7 series, and
ELAN II/IIE, keeps out most sunlight
and other external light, substantially
enhancing viewfinder visibility. It
is especially helpful for eyeglass
wearers when photographing out-
doors. The mount can be rotated
for vertical shots.
Anti-Fog Eyepiece
These eyecups use specially treated
advanced-process glass, which
prevents condensation, or fogging.
The eyecups are useful in warm,
humid and cold weather, when
fogging is most likely to occur.
Eyepiece Extender EP-EX15
Extends the eyepiece
5
/8" (15mm)
from the camera body and reduces
viewfinder magnification by 30%.
Useful for eyeglass wearers and
others to keep the tip of the nose
from touching the camera body.
Angle Finder C
Angle Finder C lets users adjust the
viewing angle while providing a 2.5x
magnification for critical focusing,
or a full-screen image (1.25x) that
includes exposure data. Provided
with built-in dioptric adjustment
for variations in eyesight, Angle
Finder C includes Adapter Ec-C and
Ed-C to fit any EOS camera.
Must be slid up when opening/closing
camera’s back cover.
* Used with Dioptric Adjustment Lens E. ** Except Digital Rebel, Rebel T2, Ti and Rebel K2
EF 180mm f/3.5L Macro USM •f/4.5 •1/200 sec.
Focusing Screens Ee Series
Compatibility EOS 5D
Description
Ee-A: Precision Matte
Replacement standard
focus screen exclusively
for the EOS 5D. Matte
surface with nine AF
points etched on screen.
For general photography
with all lenses.
Ee-D: Precision Matte
with Grid Lines
Similar to standard Ee-A
screen for EOS 5D, but
with horizontal and
vertical lines for precise
subject placement or
alignment. Overall matte
surface gives viewing
and focusing very simlar
to standard Ee-A screen.
EOS 5D must be set to
Custom Function 00-1
for accurate exposure
metering.
Ee-S: Super-Precision
Matte
An all-matte focus
screen for the EOS 5D
with finer microlens
structure than the stan-
dard screens. Out-of-
focus areas show more
vividly than with Ee-A
and Ee-D screens. It's
ideally suited for use
with f/2.8 and faster
lenses, especially for
manual focusing. EOS
5D must be set to
Custom Function 00-2
for accurate exposure
metering.
Focusing Screen Sets for 4x5 and Square Fomats
Compatibility EOS-1Ds Mark II, EOS-1D Mark II N, EOS 5D
Description
Ec-1Ds/Ec-1D/Ee:
Crop Lines
Ideal for the portrait and wedding photographer, the set
“Crop Lines” includes two focus screens—one with 4x5
(or 8x10) crop lines etched on the screen, and a second
screen with lines for square composition. All exposure
metering can be performed normally in camera, and
red focus point illumination remains fully active. The
other sets “Black Mask” have and opaque black mask
outside the picture area. One screen of the set shows
the area for 4x5 (or 8x10) cropping, the other shows the
area for square cropping. Partial or spot metering is
recommended for these screens. E-TTL II flash expo-
sure will definitely require significant compensation.
FEL (Flash Exposure Lock) in conjunction with either
partial or spot metering is recommended.
3 types are available for both sets respectively, according
to the size of the CMOS sensor and viewfinder optics:
for full frame 1Ds series*, 1D series and for 5D.
*can also be attached to 35mm EOS-1 series and
EOS-3 cameras.
Ec-1Ds/Ec-1D/Ee:
Black Mask
Focusing Screens Ec Series
Compatibility EOS-1Ds Mark II, 1Ds, 1D Mark II N, 1D Mark II, 1D, D2000, 1V HS, 1V, 1N RS, 1N, 1 and 3
Description
Ec-A: Microprism
This matte field screen
with microprism
focusing spot in the
center is used for
general photography
with all lenses.
It achieves best results
when using a lens of
f/ 5.6 or faster.
Ec-B: New Split
This matte field screen
with split-image
focusing spot in the
center is good for
general photography
with all lenses.
Ec-CIII: Laser-Matte
Standard on the EOS-1D
series, EOS-1
V HS/
EOS-1
V , and compatible
with all EF lenses, this
screen includes an Area
AF ellipse and spot-
metering circle. Manual
focus can be checked
anywhere on the screen.
Ec-D: Laser-Matte
with Sections
This is a matte field
screen with sections.
Grid lines assist in
determining accurate
picture composition. It
is especially well suited
for close-up photogra-
phy or for copy work
using EF macro lenses,
it can also be used for
general photography
with all lenses.
Ec-H: Laser-Matte
with Scale
A matte field screen with
vertical and horizontal
scales marked in milli-
meters, this screen is
effective for close-up
photography and photo-
micrography. Useful in
determining magnification
ratios and composition,
this screen can be used
with all lenses.
Ec-l: Laser-Matte with
Double Cross-Hair Reticle
This is a matte field
screen with a clear center
spot containing a double
cross-hair reticule.
Focusing is possible
using the floating image
of the central cross hair.
This screen is particularly
useful for photomicrog-
raphy and astrophotog-
raphy. Surrounding
matte field can be used
with all lenses.
Ec-L: Cross-Split Image
This matte field screen
has a cross-split image
in the center, which
divides the subject in
half both vertically and
horizontally for accurate
manual focusing. Used
for general photography
with all lenses, best
results are obtained
when using a lens of
f/ 5.6 or faster.
Ec-N: New Laser-Matte
This is the standard screen
for the EOS-3. The outer
oval-shaped area defines
the coverage of the 45 AF
points; the inner circle is
for spot and FEL metering.
When shooting, the focus-
ing points will be indicated
in red LCD markings.
Along with the Ec-R screen,
it is approximately 1/ 2
stop brighter than the
Laser-Matte series screens.
Note: All focusing screens include
a special tool for removing original
screen and installing new screen.
EOS-1Ds, EOS-1D Mark II, EOS-1D,
EOS-1v HS and EOS-1v—If using
New Laser Matte Focus Screens
Ec-N or Ec-R, be sure to set
camera’s Custom Function C.Fn-
0 to “0”. EOS-3—If using Laser
Matte Ec-A, Ec-B, Ec-C II, Ec-C III,
Ec-D, Ec-I or Ec-L focus screens,
be sure to set camera’s Custom
Function C.Fn-0 to “1”. Exposure
compensation is required when
combining the focusing screen
Ec-R with the EOS-1 or EOS-1n,
and when combining the focusing
screens Ec-A, B, Cll, D, H, I and
L with the EOS-1n RS. Refer to
each focusing screen’s instruc-
tions for detailed information.
Compatibility EOS-1Ds Mark II, 1Ds, 1D Mark II N, 1D Mark II, 1D, D2000, 1V HS, 1V, 1N RS, 1N, 1 and 3 EOS-1D Mark II N
Description
Ec-R: New Laser-Matte
This is the standard
screen provided with the
EOS-1n RS. It compen-
sates for decreased
viewfinder brightness
due to the low reflection
factor of the pellicle mir-
ror. It is about 1/2-stop
brighter but otherwise
similar to Focusing Screen
Ec-CII. It can be used in
all EOS-1 series cameras,
as well as the EOS-3.
Ec-S: Super Precision
Matte*
An all-matte focus
screen for the EOS-1D
Mark II
N with finer
microlens structure than
the standard screens.
Out-of-focus areas show
more vividly than with
the other Ec type screens.
It’s ideally suited for use
with f/2.8 and faster
lenses, especially for
manual focusing.
*EOS-1D Mark II N must be set to
Custom Function 00-2 for accu-
rate exposure metering when
this screen is installed. Manual
exposure is required for use with
other EOS-1 series cameras.