Operation Manual

357
3 Setting the Movie Recording Quality
Records the movie at a frame rate of 24.00 fps.
When [Enable] is set, you can select the
movie-recording quality as follows:
HBJ, LBW, or
LBX.
If you have set [Movie rec. size] and
then set [24.00p] to [Enable], set the
[Movie rec. size] again.
24.00p
 To optimize the use of the card, formatting the card with the camera
before shooting movies is recommended (p.73).
 To check the card’s reading/writing speed, refer to the card
manufacturer’s website.
 For bit rates, see page 580.
Cautions for [24.00p: Enable]
 When [MP4] is set, [Movie rec. size] cannot be set. LBX will be
set.
 [High Frame Rate] (p.358) cannot be set.
 [53: Video system] cannot be set.
 [54: HDMI frame rate] (p.390) cannot be set. The movie image will be
output at 1080/24.00p via HDMI. If you connect the camera to a TV set
etc. not compatible with the 1080/24.00p signal via HDMI, the movie
image may not be displayed.
 If you set it back to [Disable], [54: HDMI frame rate] will be set to
[Auto].
 Even if you set it back to [Disable], the movie recording size will not
revert to the original setting. Set the movie recording size again.