Operation Manual

You can use a CF card and an SD card with this camera. Images can

be recorded when at least one card is installed in the camera.

If cards are inserted in both slots, you can select which card to record images

to or can record the same images simultaneously on both cards (p.166-168).

Open the cover.

 Slide the cover as shown by the

arrows to open it.

Insert the card.

 The camera-front side slot is for a CF

card, and the camera-back side slot

is for an SD card.

 The CF card is [f] (Card 1) and the

SD card is [g] (Card 2).

 With the CF card’s label side facing

you, insert the end with the small

holes into the camera. If the card is

inserted in the wrong way, it may

damage the camera.

 The CF card eject button (gray) will

stick out.

 With the SD card’s label facing

you, push in the card until it clicks

in place.

Installing and Removing the Card

Installing the Card

If you use an SD card, make sure the card’s write-protect switch is set

upward to enable writing/erasing.

Write-protect switch

SD card (Card 2)

CF card (Card 1)