Operation Manual

461
3 Appending Dust Delete DataN
3
Shoot a solid-white object.
 At a distance of 20 cm - 30 cm (0.7 ft.
- 1.0 ft.), fill the viewfinder with a
patternless, solid-white object and
take a picture.
 The picture will be taken in aperture-
priority AE mode at an aperture of
f/22.
 Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
 When the picture is taken, the camera
will start collecting the Dust Delete
Data. When the Dust Delete Data is
obtained, a message will appear.
 If the data is not obtained
successfully, an error message will
appear. Follow the “Preparation”
procedure on the preceding page,
then select [OK]. Take the picture
again.