Operation Manual

97
AF Area Selection ModesN
The Area AF frame (entire AF area) is used to focus. This mode is set
automatically in the <A> mode.
The AF point(s) achieving focus is displayed as <S>.
With One-Shot AF, pressing the shutter button
halfway will display the AF point(s) <S> that
achieved focus. If multiple AF points are displayed,
it means they all have achieved focus. This mode
tends to focus on the nearest subject.
With AI Servo AF, you can set the AI Servo AF’s
starting position with [Initial AF pt, AI Servo
AF] (p.128). As long as the Area AF frame can
track the subject during shooting, focusing will
continue.
61-point automatic selection AF