Instruction Manual
Table Of Contents
- Cover
- Introduction
- Getting Started
- Charging the Battery
- Installing and Removing the Battery
- Installing and Removing the Card
- Turning on the Power
- Setting the Date, Time, and Zone
- Selecting the Interface Language
- Attaching and Detaching a Lens
- Basic Operation
- Quick Control for Shooting Functions
- Menu Operations
- Before You Start
- Displaying the Grid
- Displaying the Electronic Level
- Setting the Viewfinder Information Display
- Help
- Basic Shooting
- Setting the AF and Drive Modes
- Image Settings
- Selecting the Card for Recording and Playback
- Setting the Image-Recording Quality
- Setting Crop/Aspect Ratio
- Setting the ISO Speed
- Selecting a Picture Style
- Customizing a Picture Style
- Registering a Picture Style
- Setting the White Balance
- White Balance Correction
- Auto Correction of Brightness and Contrast
- Setting Noise Reduction
- Highlight Tone Priority
- Correction of Lens Peripheral Illumination and Aberration
- Reducing Flicker
- Setting the Color Space
- Creating and Selecting a Folder
- Changing the File Name
- File Numbering Methods
- Setting Copyright Information
- Advanced Operations
- Program AE
- Shutter-Priority AE
- Aperture-Priority AE
- Manual Exposure
- Selecting the Metering Mode
- Setting Exposure Compensation
- Auto Exposure Bracketing (AEB)
- AE Lock
- Bulb Exposures
- HDR (High Dynamic Range) Shooting
- Multiple Exposures
- Mirror Lockup
- Using the Eyepiece Cover
- Using a Remote Switch
- Remote Control Shooting
- Interval Timer Shooting
- Flash Photography
- Shooting with the LCD Monitor (Live View Shooting)
- Shooting Movies
- Image Playback
- Image Playback
- Shooting Information Display
- Searching for Images Quickly
- Magnifying Images
- Comparing Images (Two-Image Display)
- Rotating the Image
- Protecting Images
- Setting Ratings
- Quick Control for Playback
- Enjoying Movies
- Playing Back Movies
- Editing a Movie’s First and Last Scenes
- Slide Show (Auto Playback)
- Viewing Images on a TV Set
- Copying Images
- Erasing Images
- Changing Image Playback Settings
- Post-Processing Images
- Sensor Cleaning
- Printing Images and Transferring Images to a Computer
- Customizing the Camera
- Reference
- Viewing the CD-ROM Instruction Manuals / Downloading Images to Your Computer
153
3 Setting the Image-Recording Quality
With Custom Controls, you can assign the image-recording quality to
the <B> button or depth-of-field preview button so you can switch
to it momentarily. If you assign [One-touch image quality setting] or
[One-touch image quality (hold)] to the <B> button or depth-of-
field preview button, you can quickly switch to the desired image-
recording quality and shoot.
For details, see Custom Controls (p.413).
The approximate maximum burst is
displayed in the viewfinder, Quick
Control screen, and on the bottom right
of the Custom Quick Control screen.
If the maximum burst for continuous
shooting is 99 or higher, “99” will be
displayed.
One-touch Image Quality Setting
Maximum Burst for Continuous Shooting
Under [51: Record func+card/folder sel.], if [Record func.] is set to [Rec.
separately], you cannot switch to the One-touch image quality setting.
The maximum burst is displayed even when a card is not inserted in the
camera. Make sure that a card is inserted before taking a picture.
If the maximum burst is displayed as “99”, it indicates that you can shoot 99
or more shots continuously. If the maximum burst decreases to 98 or lower
and the internal buffer memory becomes full, “buSY” will be displayed in the
viewfinder and on the LCD panel. Shooting will then be disabled temporarily.
If you stop continuous shooting, the maximum burst will increase. After all
the captured images are written to the card, you can resume continuous
shooting and shoot up to the maximum burst listed on page 151.