Instruction Manual

Logging the Route Traveled
G-14
5
Set [Log GPS position] to
[Enable].
Location information is recorded at regular intervals along the route the
camera traveled, as shown in [Position update timing] in the table
below. Daily logs are saved on the camera’s internal memory. The
number of days for which you can store logs depends on the positioning
interval you specify in [Position update timing] (p.G-11).
Log File Capacity, by Positioning Interval
* Capacity when logging eight hours per day
Log file names consist of date and number (e.g.2012103100). Files
are created per day. When the time zone is changed, a different file
is created.
Log files stored on the internal memory can be transferred to a card
(p.G-15).
When the camera’s internal memory becomes full, the oldest log
files are overwritten with new information, one by one.
Location Information Logs
Position update
timing
Log Files (Approx.)
Position update
timing
Log Files (Approx.)
Every 1 sec. 4.4 days Every 30 sec. 100 days
Every 5 sec. 22 days Every 1 min. 100 days
Every 10 sec. 44 days Every 2 min. 100 days
Every 15 sec. 67 days Every 5 min. 100 days
When the GPS logging function is enabled, the <x> icon is displayed on
the camera LCD panel and LCD monitor.
COPY