Operation Manual

119
Set exposure compensation if the exposure (without flash) does not
come out as desired. This feature can be used in Creative Zone modes
(except <a>). You can set the exposure compensation up to ±5 stops
in 1/3-stop increments.
1
Check the exposure level indicator.
Press the shutter button halfway
(0) and check the exposure level
indicator in the viewfinder or on the
LCD monitor.
2
Set the compensation amount.
If the exposure is too dark, hold down
the <
g > button and turn the < 6 >
dial to the right (for increased exposure).
If the exposure is too bright, hold down
the <
g > button and turn the < 6 >
dial to the left (for decreased exposure).
3
Take the picture.
To cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
Setting Exposure CompensationK
Increased exposure
for a brighter image
Decreased exposure
for a darker image