Operation Manual

Using AF to Focus (AF Method)
128
You can also tap on the LCD monitor
screen to select the face or subject. If
the subject is not a face, <z> will be
displayed.
If no faces can be detected, or if you
tap on the LCD monitor but do not
select any face or subject, the camera
will switch to [
FlexiZone - Multi ] with
automatic selection (p.128).
3
Focus on the subject.
Press the shutter button halfway to
focus.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn orange.
4
Take the picture.
Check the focus and exposure, then
press the shutter button completely to
take the picture (p.124).
You can use up to 49 AF points for wide-area focusing (automatic selection).
This wide area can also be divided into 9 zones for focusing (zone selection).
1
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
FlexiZone - Multi:
o
Area frame