Instruction Manual

395
Troubleshooting Guide
 If the number of images recorded on the card exceeds the number the
camera can display, [###] will be displayed (p.299).
 If the LCD monitor is dirty, use a soft cloth to clean it.
 In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
 [Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card’s connection
status or disable Eye-Fi transmission (p.368).
 It is the highlight alert (p.324). Overexposed areas with clipped
highlight will blink.
 If the image is protected, it cannot be erased (p.316).
 Movies edited with a computer cannot be played back with the camera.
[###] is displayed.
The LCD monitor does not display a clear image.
[Eye-Fi settings] does not appear.
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.