EOS 760D (W) A Wi-Fi/NFC funkció kezelési kézikönyve MAGYAR KEZELÉSI KÉZIKÖNYV
Bevezetés A vezeték nélküli hálózati funkciókkal elvégezhető feladatok A fényképezőgép vezeték nélküli hálózati funkcióinak használatával számos feladatot elvégezhet vezeték nélkül; a képek webszolgáltatásokba és más fényképezőgépekre küldésétől a fényképezőgép távvezérléséig. Ehhez csak csatlakoznia kell egy Wi-Fihálózathoz vagy a fényképezőgép vezeték nélküli funkcióit támogató másik eszközhöz.
Bevezetés (1) q Csatlakoztatás okostelefonhoz (25. és 83. oldal) A mentett képek megjelenítése és a fényképezőgép működtetése Wi-Fi funkcióval rendelkező okostelefonról vagy táblagépről. E funkciók használatához telepítse az erre szolgáló Camera Connect alkalmazást. A jelen útmutatóban, valamint a fényképezőgép LCD-monitorának üzeneteiben az „okostelefon” szó egyaránt vonatkozik az okostelefonokra és a táblagépekre. (2) z Képek átvitele fényképezőgépek között (43.
A kézikönyv felépítése Jelen kézikönyv a következő fejezetekből épül fel: „Az első lépések”, „Egyszerű csatlakozás” és „Speciális csatlakozás”. Az első lépések (19. oldal) fejezetben ismertetett Becenév regisztrálása művelet elvégzését követően igény szerint tekintse meg a következő oldalakat. z/Connect Station: „Egyszerű csatlakozás” (23. oldal) o/m: „Speciális csatlakozás” (65. oldal) q/l: Igényei szerint „Egyszerű csatlakozás” vagy „Speciális csatlakozás” Az első lépések (11.
Fejezetek Bevezetés 2 Az első lépések 1 2 Alapvető műveletek és beállítások 13 Becenév regisztrálása 19 3 4 5 6 Egyszerű csatlakoztatás okostelefonhoz 25 Képek átvitele fényképezőgépek között 43 Egyszerű csatlakoztatás Wi-Fi-nyomtatóhoz 53 Egyszerű csatlakoztatás Connect Station 61 7 8 9 10 11 12 13 14 15 Wi-Fi hozzáférési pont használata 69 Wi-Fi csatlakoztatás okostelefonhoz 83 Wi-Fi csatlakoztatás Wi-Fi-nyomtatóhoz 93 Egyszerű csatlakozás Speciális csatlakozás Képek megtekintése
Tartalom Bevezetés 2 A vezeték nélküli hálózati funkciókkal elvégezhető feladatok .......... 2 A kézikönyv felépítése...................................................................... 4 Fejezetek.......................................................................................... 5 Tartalom ........................................................................................... 6 A kézikönyvben használt jelölések.................................................
Tartalom 4 Képek átvitele fényképezőgépek között 43 A csatlakozás céljának kiválasztása ...............................................44 Képek küldése ................................................................................ 46 Újracsatlakozás...............................................................................50 Több kapcsolat beállításainak regisztrálása ...................................
Tartalom 9 Wi-Fi csatlakoztatás Wi-Fi nyomtatóval 93 Infrastruktúra mód használata kapcsolat létesítéséhez ................. 94 Nyomtatás ...................................................................................... 95 Újracsatlakozás .............................................................................. 98 Több kapcsolat beállításainak regisztrálása................................... 99 10 Képek megtekintése médialejátszóval 101 A képek megtekintése tévékészüléken .................
Tartalom 14 Hibaelhárítási útmutató 139 Hibaüzenetek kezelése................................................................. 140 Hibaelhárítási útmutató ................................................................. 153 Vezeték nélküli LAN hálózattal kapcsolatos megjegyzések ......... 154 Hálózati beállítások ellenőrzése ................................................... 156 15 Referencia 157 A hálózat kézi beállítása ...............................................................
A kézikönyvben használt jelölések A kézikönyvben a „vezeték nélküli hálózat” kifejezést általánosan használjuk a Wi-Fi funkcióra és a Canon eredeti vezeték nélküli kommunikációs funkcióira. A „hozzáférési pont” kifejezést olyan vezeték nélküli LAN-terminálra (vezeték nélküli LAN hozzáférési pontokra, vezeték nélküli hálózati útválasztókra stb.) használjuk, amely a vezeték nélküli hálózati kapcsolatokat közvetíti.
Az első lépések 11
Műveleti folyamatábra Ez a fejezet a vezeték nélküli LAN funkciók alapvető műveleteit, illetve az (azonosításra szolgáló) becenév regisztrálásának módját ismerteti. Kövesse az alábbi műveletsort. Állítsa a [Wi-Fi/NFC] beállítást az [Enged] lehetőségre. (1. és 2. lépés a 14. oldalon) A beállítás első kiválasztásakor megjelenik a becenév regisztrálására szolgáló képernyő. Becenév regisztrálása. (20. oldal) Állítsa be a fényképezőgép becenevét. Írjon be 1-14 tetszőleges karakterből álló becenevet, pl.
1 Alapvető műveletek és beállítások Ez a fejezet a fényképezőgép vezeték nélküli hálózati funkcióinak használatához szükséges alapvető műveleteket és beállításokat írja le.
Alapvető műveletek és beállítások A fényképezőgép vezeték nélküli hálózati funkcióinak használatához szükséges alapvető műveleteket itt ismertetjük. Kövesse az alábbi műveletsort. 1 Válassza ki a [Wi-Fi/NFC] beállítást. A [51] lapon válassza a [Wi-Fi/NFC] lehetőséget, majd nyomja meg a <0> gombot. az [Enged] parancsot. 2 Válassza A gombbal válassza ki az [Enged] lehetőséget, majd nyomja meg a <0> gombot.
Alapvető műveletek és beállítások ki azt a Wi-Fi funkciót, 4 Válassza amelyikhez kapcsolódni szeretne. A vagy gombokkal válasszon egy lehetőséget. A fényképezőgép vezeték nélküli LAN-beállításai erről a képernyőről adhatók meg. További csatlakozási beállításokért tekintse meg az „Egyszerű csatlakozás” vagy a „Speciális csatlakozás” lehetőséget. [Wi-Fi/NFC] Ha beállítása [Tilt], a [Wi-Fi funkció] nem választható ki a [51] lapon.
Alapvető műveletek és beállítások Automatikus kikapcsolás Ha szükséges, az [Autom. kikapcs.] számára a [52] lapon adja meg a [Letiltás] beállítást. Ha a fényképezőgép automatikus kikapcsolási funkciója aktiválódik a vezeték nélküli hálózati kapcsolat használata közben, a kapcsolat megszakad. A vezeték nélküli LAN-csatlakozás állapota A vezeték nélküli LAN-csatlakozás állapota az LCD-panelen ellenőrizhető.
Alapvető műveletek és beállítások Érintésvezérlés A vezeték nélküli LAN funkcióit a képernyő érintésével is vezérelheti. Az NFC funkcióval elvégezhető feladatok A fényképezőgép NFC funkciójával a következőket teheti: NFC funkcióval rendelkező okostelefont a fényképezőgéphez érintve egyszerűen csatlakoztathatja a két eszközt vezeték nélküli LAN-kapcsolaton keresztül (28. oldal).
Alapvető műveletek és beállítások Kábel csatlakoztatásával kapcsolatos figyelmeztetések Ha a [51: Wi-Fi/NFC] beállítás értéke [Enged], az interfészkábelen, sztereó AV-kábelen és HDMI-kábelen keresztüli csatlakoztatás le van tiltva. A kábelek csatlakoztatása előtt állítsa a [51: Wi-Fi/NFC] funkciót [Tilt] beállításra. Ha a fényképezőgép interfészkábellel Connect Station-höz, számítógéphez, nyomtatóhoz, GPS-vevőhöz, tévéhez vagy más eszközhöz csatlakozik, a [Wi-Fi/NFC] beállítása nem módosítható.
2 Becenév regisztrálása Ez a fejezet a fényképezőgép becenevének beállítását ismerteti (a későbbi azonosításhoz).
Becenév regisztrálása Csatlakozás beállítása előtt adja meg a fényképezőgép becenevét (az azonosításhoz). Amikor a fényképezőgépet másik eszközhöz csatlakoztatja vezeték nélküli hálózaton keresztül, a becenév látható az eszközön. Mindenképp adjon meg becenevet, máskülönben nem tud a vezeték nélküli LAN beállítási képernyőjére lépni. 1 Válassza ki a [Wi-Fi/NFC] beállítást. A [51] lapon válassza a [Wi-Fi/NFC] lehetőséget, majd nyomja meg a <0> gombot. az [Enged] parancsot.
Becenév regisztrálása be becenevet. 3 Írjon A karakterek beírásával kapcsolatos útmutatásokért tekintse meg a következő oldalon „A virtuális billentyűzet használata” című részt. Írjon be 1-14 tetszőleges karakterből álló becenevet. ki a beállításból. 4 Lépjen A befejezés után nyomja meg a gombot. A megerősítést kérő párbeszédpanelen válassza az [OK] lehetőséget, majd nyomja meg a <0> gombot a menüképernyőre való visszatéréshez. A becenév később az [Ált. beáll.] képernyőről módosítható (138.
Csatlakoztatás az NFC funkcióval Csatlakoztatás okostelefonhoz 1 Érintse az okostelefont a fényképezőgéphez. Ha a fényképezőgépen képet jelenít meg, állítsa le a megjelenítést. Érintse az okostelefon p jelzését a fényképezőgép hasonló jelzéséhez. Amikor a fényképezőgép LCD-monitorán megjelenik a csatlakozásról szóló tájékoztató üzenet, vegye el az okostelefont a fényképezőgéptől. Az okostelefonon elindul a Camera Connect alkalmazás, és beállítja a csatlakozást.
Csatlakoztatás az NFC funkcióval fényképezőgépet a Camera 3 AConnect használatával működtetheti. További műveleteket a Camera Connect használatával végezhet. A működtetési eljárásról a 35. oldalon olvashat. Az okostelefonnal való kommunikációhoz szükséges beállítások megadása befejeződött. Figyelmeztetések az NFC funkcióval kapcsolatban Az okostelefon fényképezőgéphez érintésekor vigyázzon, nehogy elejtse a fényképezőgépet vagy az okostelefont. Az okostelefont ne üsse erősen a fényképezőgéphez.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez Az NFC funkcióval nem rendelkező okostelefonok a fényképezőgép hozzáférési pont módjában csatlakoztathatók. A kapcsolat létrehozásához az okostelefonon is végre kell hajtani a megfelelő műveleteket. A részletekért tekintse meg az okostelefon kezelési kézikönyvét. Műveletek a fényképezőgépen – 1. 1 Válassza ki a [Wi-Fi funkció] beállítást.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez az [Egyszerű 4 Válassza csatlakozás] lehetőséget. A gombokkal válassza ki az [Egyszerű csatlakozás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. A kézi csatlakoztatással kapcsolatban lásd: 158. oldal. Műveletek az okostelefonon – 1.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez el a Camera Connect 6 Indítsa alkalmazást az okostelefonon. Az okostelefon Wi-Fi beállításainak megadása után indítsa el a Camera Connect alkalmazást. ki az okostelefonhoz 7 Válassza csatlakoztatni kívánt fényképezőgépet. A Camera Connect alkalmazás [Cameras/Fényképezőgépek] listájában érintse meg azt a fényképezőgépet, amelyikhez csatlakozni szeretne. u Amikor a fényképezőgépen elvégezte a következő oldal 8.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez Műveletek a fényképezőgépen – 2. a fényképezőgéphez. 8 Csatlakozzon A csatlakozás létrejötte után a A Camera Connect alkalmazásban beállított eszköznév fényképezőgép LCD-monitorán megjelenik a bal oldalt látható képernyő. A megtekinthető képek megadásához nyomja meg a gombot. A beállítással kapcsolatos információkért tekintse meg a 90. oldal 5. lépését.
A fényképezőgép működtetése okostelefonnal A telepített Camera Connect alkalmazással rendelkező okostelefonok használatával megtekintheti a fényképezőgépen tárolt képeket, valamint távolról készíthet felvételeket a fényképezőgéppel. A Camera Connect főablaka A Camera Connect fő funkcióinak leírása alább olvasható. Érintse meg a képernyőt a kezelési eljárások megismeréséhez. [Images on camera/Képek a fényképezőgépen] Megjeleníthetők a fényképezőgépen tárolt képek.
A fényképezőgép működtetése okostelefonnal A kapcsolat bontása A kapcsolat bontásához végezze el az alábbi műveletek egyikét. Érintse meg a [t] ikont a Camera Connect képernyőjén. Állítsa a fényképezőgép főkapcsolóját <2> állásba. Ha meghatározza a megtekinthető képek körét (89. oldal), a Camera Connect alkalmazás funkcióinak köre is korlátozott lesz. Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel.
Újracsatlakozás A fényképezőgép olyan okostelefonokhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [q] lehetőséget. 2 Válassza Válassza ki a [q] (Csatlakozás okostelefonhoz) lehetőséget, és nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
Újracsatlakozás be az okostelefon Wi-Fi 4 Kapcsolja funkcióját. Ha a csatlakozás célja módosult, állítsa vissza a beállításokat a fényképezőgép csatlakoztatásához. el a Camera Connect 5 Indítsa alkalmazást az okostelefonon. Létrejön a kapcsolat. Ha újracsatlakozáskor nem ismeri a fényképezőgép SSID azonosítóját, akkor annak megtekintéséhez válassza a [Beáll.k megtek./ módosítása] lehetőséget a 3. lépésben (135. oldal).
Egyszerű képátvitel az NFC funkcióval A képek fényképezőgépen történő lejátszásakor egy NFC funkcióval rendelkező okostelefont a fényképezőgéphez érintve a rögzített képet az okostelefonra küldheti. Ha már van vezeték nélküli LAN hálózaton keresztül létrejött kapcsolat, zárja le azt, és jelenítse meg a képeket a fényképezőgépen. Állítsa be előre a fényképezőgépet és az okostelefont az NFC funkció használatára (28. oldal). A képek küldése egyenként 1 Jelenítse meg a képet.
Egyszerű képátvitel az NFC funkcióval Több kép küldése Ha a 39. oldal 1. lépésében az indexképes megjelenítést választotta, akkor a csatlakozás után a fényképezőgépen a képkiválasztó képernyő jelenik meg. 1 A fényképezőgép csatlakoztatása az okostelefonhoz. Jelenítse meg a képeket indexképes megjelenítéssel. Tekintse meg a 39. oldal 2. lépését az okostelefon és a fényképezőgép érintéssel történő csatlakoztatásával kapcsolatban. u Megjelenik a képválasztó képernyő.
Egyszerű képátvitel az NFC funkcióval Másik kép küldése A képküldési folyamatot befejező képernyőn nyomja meg a <0> gombot további kép küldéséhez. [Kijelölt küld.] A küldendő képeket a képválasztó képernyőn választhatja ki. [Láth.kép küld.] A megjelenített kép küldése. A küldendő kép előzetes megjelenítése. Ha szükséges, olvassa el a „Figyelmeztetések az NFC funkcióval kapcsolatban” című szakaszt is (30. oldal).
4 Képek átvitele fényképezőgépek között A beépített vezeték nélküli hálózati funkciók használatával a képek átvihetők Canon fényképezőgépek között. Csak a 2012-től értékesített, vezeték nélküli hálózati funkcióval rendelkező Canon fényképezőgépekkel lehet vezeték nélküli kapcsolatot létrehozni. Vegye figyelembe, hogy a fényképezőgép nem csatlakoztatható Canon videokamerákhoz, még akkor sem, ha azok rendelkeznek vezeték nélküli hálózati funkciókkal.
A csatlakozás céljának kiválasztása Regisztrálja a vezeték nélküli hálózati kapcsolattal csatlakoztatni kívánt célfényképezőgépet. A fényképezőgép egyszerre csak egy fényképezőgéphez csatlakoztatható. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [z] lehetőséget. 2 Válassza Válassza ki a [z] (Fényk.gépek közti képátvitel) lehetőséget, és nyomja meg a <0> gombot.
A csatlakozás céljának kiválasztása ki a küldeni kívánt 4 Válassza képeket. A fényképezőgépen válassza ki a képeket a képküldéshez (46. oldal). Ne működtesse a képeket fogadó fényképezőgépet. A GPS-adatok akkor sem jelennek meg a fényképezőgép megjelenítési képernyőjén, ha a fogadott képek tartalmaznak GPS-adatokat. A felvételkészítés helye a Map Utility (EOS-szoftver) segítségével jeleníthető meg virtuális térképen.
Képek küldése A képek küldése egyenként Válassza ki, és küldje el a képeket egyenként. 1 Válassza ki a küldeni kívánt képet. Forgassa el a <5> tárcsát a küldendő kép kiválasztásához, majd nyomja meg a <0> gombot. A gomb megnyomásával átválthat az indexképes megjelenítésre, és kiválaszthatja a képet. ki a [Láth.kép küld.] 2 Válassza lehetőséget. A küldött kép méretének kiválasztásához válassza a [Kép átméretez.] lehetőséget, és nyomja meg a <0> gombot. A gombokkal válassza ki a [Láth.
Képek küldése a képméretet. 4 Csökkentse Válassza ki a szükséges beállítást. A következő képernyőn a gombokkal válasszon képméretet, majd nyomja meg a <0> gombot. el a képeket. 5 Küldje A gombok megnyomásával válassza a [Küldés] lehetőséget, majd a képek küldéséhez nyomja meg a <0> gombot. u Megjelenik az átvitel előrehaladását jelző képernyő. Az átvitel befejezése után újra megjelenik a 1. lépés képernyője. Újabb kép kiválasztásához ismételje meg az 1–5. lépést. a kapcsolatot.
Képek küldése Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel. Ha bontani szeretné a kapcsolatot felvételkészítéshez vagy más művelet elvégzéséhez, akkor nyomja meg a gombot, majd bontsa a kapcsolatot a megjelenő képernyőn. A kapcsolat képátvitel közbeni megszakításához válassza a [Mégse] lehetőséget a fényképezőgépen, majd bontsa a kapcsolatot.
Újracsatlakozás A fényképezőgép csak olyan fényképezőgéphez tud újracsatlakozni, amelyhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [z] lehetőséget. 2 Válassza Válassza ki a [z] (Fényk.gépek közti képátvitel) lehetőséget, és nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
Több kapcsolat beállításainak regisztrálása Legfeljebb három kapcsolatbeállítást regisztrálhat fényképezőgépekhez. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [z] lehetőséget. 2 Válassza Válassza ki a [z] (Fényk.gépek közti képátvitel) lehetőséget, és nyomja meg a <0> gombot. a [Beáll.választ.] 3 Válassza lehetőséget. Válassza a [Beáll.választ.
52
5 Egyszerű csatlakoztatás Wi-Fi nyomtatóhoz A képeket közvetlenül kinyomtathatja, ha a fényképezőgépet vezeték nélküli helyi hálózat használatára és a PictBridge (vezeték nélküli LAN hálózat) vezeték nélküli LAN hálózaton keresztüli használatára alkalmas nyomtatóhoz csatlakoztatja. A vagy módban, vagy a Többfelvételes zajcsökkentés beállítása esetén a fényképezőgép nem csatlakoztatható a nyomtatóhoz.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez A fényképezőgép és a nyomtató vezeték nélküli hálózaton keresztül közvetlenül csatlakoztatható egymáshoz. Mivel a fényképezőgép hozzáférési pontként működik, nincs szükség más hozzáférési pontra, így a képek egyszerűen nyomtathatók. A kapcsolat létrehozásához a nyomtatón is végre kell hajtani a megfelelő műveleteket. A részleteket lásd a nyomtató kezelési kézikönyvében. 1 Válassza ki a [Wi-Fi funkció] beállítást.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez az [Egyszerű 4 Válassza csatlakozás] lehetőséget. A gombokkal válassza ki az [Egyszerű csatlakozás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. A kézi csatlakoztatással kapcsolatban lásd: 158. oldal. SSID (hálózatnév) meg a nyomtató Wi-Fi5 Adja beállításait a fényképezőgéphez való csatlakozáshoz.
A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez ki azt a nyomtatót, 6 Válassza amelyikhez kapcsolódni szeretne. Amikor megjelenik az észlelt nyomtatók listája, válassza ki azt a nyomtatót, amelyikhez kapcsolódni szeretne, majd nyomja meg a <0> gombot. u Néhány nyomtató esetében hangjelzés hallható. Ha a készülék 16 vagy több nyomtatót észlelt, vagy a keresés 3 percnél tovább tart, választhatja a [Keresés ismét] lehetőséget.
Nyomtatás A képek nyomtatása egyenként Válassza ki, majd nyomtassa ki egyenként a képeket. 1 Válasszon ki egy nyomtatni kívánt képet. A <5> tárcsa elforgatásával válassza ki a nyomtatni kívánt képet, majd nyomja meg a <0> gombot. A gomb megnyomásával átválthat az indexképes megjelenítésre, és kiválaszthatja a képet. ki a [Kép nyomtatása] 2 Válassza lehetőséget. A gombokkal válassza ki a [Kép nyomtatása] lehetőséget, majd nyomja meg a <0> gombot.
Nyomtatás Nyomtatás az opciók beállításával Nyomtatás a nyomtatási beállítások megadásával. 1 Nyomja meg a <0> gombot. ki a [Kijel.nyomt.ra] 2 Válassza lehetőséget. A gombokkal válassza ki a [Kijel.nyomt.ra] lehetőséget, majd nyomja meg a <0> gombot. u Megjelenik a [Kijel.nyomt.ra] képernyő. be a nyomtatási 3 Állítsa beállításokat. A beállítási eljárásokkal kapcsolatos további információkért tekintse meg a fényképezőgép kezelési kézikönyvének „Képek nyomtatása” című fejezetét.
Nyomtatás a kapcsolatot. 5 Bontsa Nyomja meg a gombot az 1. lépésben látható képernyőre való visszatéréshez . A megerősítést kérő képernyő megjelenítéséhez ismételten nyomja meg a gombot. A gombbal válassza ki az [OK] lehetőséget, majd a kapcsolat bontásához nyomja meg a <0> gombot. u Újra megjelenik a [Wi-Fi funkció] képernyő. Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel.
Újracsatlakozás A fényképezőgép olyan nyomtatókhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [l] lehetőséget. 2 Válassza Válassza ki a [l] (Nyomtatás Wi-Fi nyomtatóról) lehetőséget, majd nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
6 Egyszerű csatlakoztatás Connect Station készülékhez A (külön kapható) Connect Station olyan eszköz, amely lehetővé teszi a készített állóképek és videók importálását tévén, okostelefonon vagy más készüléken történő megtekintéshez, illetve hálózaton keresztüli megosztáshoz. Az állóképek és a videók egyszerűen menthetők a Connect Station készülékre: elég a fényképezőgépet a Connect Station készülékhez közel tartania.
Képek mentése Ez a fejezet a fényképezőgép és a (külön kapható) Connect Station vezeték nélküli LAN hálózaton keresztüli csatlakoztatását ismerteti. A képek más módon történő mentéséhez tekintse meg a Connect Station kezelési kézikönyvét. Állítsa be a fényképezőgépet az NFC funkció használatára (28. oldal). Állítsa be előre a fényképezőgépet az 1 NFC funkció használatára (28. oldal). a fényképezőgépet közel a 2 Tartsa Connect Station készülékhez.
Képek mentése A fényképezőgépet ne ejtse a Connect Station állomásra, valamint ne üsse ahhoz erősen. Ellenkező esetben a Connect Station belső merevlemeze károsodhat. Mivel előfordulhat, hogy a fényképezőgépet a készülék nem ismeri fel azonnal, a fényképezőgépet gondosan a Connect Station közelében tartva módosítsa annak helyzetét és szögét. Előfordulhat, hogy nem elég csupán közel tartani a fényképezőgépet a Connect Station készülékhez.
64
Speciális csatlakozás 65
A vezeték nélküli LAN funkció folyamatábrája (Speciális csatlakozás) q l o m Okostelefon Nyomtató Médialejátszó Webszolgáltatás Beállítás Becenév regisztrálása (20. oldal) Telepítse a Camera Connect alkalmazást az okostelefonra (68. oldal) Csatlakoztassa az egyes eszközöket egy Wi-Fi hozzáférési ponthoz* • Regisztráljon a CANON iMAGE GATEWAY webszolgáltatásra (108. oldal) • Regisztrálja a fényképezőgép webszolgáltatásait (108.
A z (Képek átvitele fényképezőgépek között) vagy a Connect Station készülékhez történő csatlakozás esetén tekintse meg az „Egyszerű csatlakozás” című fejezetet (23. oldal). *Ezeket a műveleteket az egyes eszközök (pl. okostelefon) Wi-Fi hozzáférési ponthoz történő csatlakoztatását követően kell elvégezni.
Felkészülés okostelefon csatlakoztatására A [q] (Csatlakozás okostelefonhoz) használatához az erre a célra szolgáló (ingyenes) Camera Connect alkalmazást előre telepíteni kell az okostelefonra. A Camera Connect letölthető az App Store vagy a Google Play áruházból. A Camera Connect használatához iOS vagy Android rendszert futtató okostelefonra van szükség. A támogatott operációs rendszerekkel kapcsolatos információkért tekintse meg a Camera Connect letöltési oldalát.
7 Wi-Fi hozzáférési pont használata Ha vezeték nélküli Wi-Fi hozzáférési ponthoz csatlakozik, a következő funkciókat érheti el: • • • • Csatlakoztatás okostelefonhoz Képek nyomtatása Wi-Fi nyomtatóval Képek megtekintése médialejátszóval Képek küldése webszolgáltatásba* *Képek webszolgáltatásba küldéséhez ugorja át az ebben a fejezetben található magyarázatot, és tekintse meg a 107. oldalt.
A hozzáférési pont típusának ellenőrzése Első lépésként ellenőrizze, hogy a hozzáférési pont támogatja-e a Wi-Fi készülékek egyszerű csatlakoztatását lehetővé tevő Wi-Fi Protected Setup (WPS) funkciót. Ha nem tudja, hogy az Ön által használt hozzáférési pont támogatja-e a WPS funkciót, akkor tekintse meg a hozzáférési pont kezelési kézikönyvét vagy más dokumentációját. Ha a WPS támogatott Ebben az esetben a következő két csatlakoztatási mód érhető el.
Csatlakozás WPS használatával (PBC mód) Ez a csatlakozási mód akkor érhető el, ha WPS funkcióval rendelkező hozzáférési pontot használ. Nyomógombos csatlakozási módban (PBC mód) a fényképezőgép és a hozzáférési pont egyszerűen csatlakoztatható a hozzáférési pont WPS gombjának megnyomásával. Ha a közelben több hozzáférési pont is működik, akkor a kapcsolat létesítése nehezebb lehet. Ebben az esetben próbálja a [WPS (PIN mód)] használatával létrehozni a kapcsolatot.
Csatlakozás WPS használatával (PBC mód) a [WPS (PBC mód)] menüpontot. 4 Válassza A gombokkal válassza ki a [WPS (PBC mód)] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. a hozzáférési ponthoz. 5 Csatlakozzon Nyomja meg a hozzáférési pont WPS gombját. A gomb helyével és nyomva tartási idejével kapcsolatos információkért tekintse meg a hozzáférési pont kezelési kézikönyvét.
Csatlakozás WPS használatával (PBC mód) A Wi-Fi funkció beállításainak elvégzése Ebben a fejezetben a Wi-Fi funkció képernyőinek beállítását ismertetjük. Olvassa el a kiválasztott Wi-Fi funkciót bemutató oldalt. Csatlakoztatás okostelefonhoz: 8. fejezet (83. oldal) Képek nyomtatása Wi-Fi nyomtatóval: 9. fejezet (93. oldal) Képek megtekintése médialejátszóval: 10. fejezet (101. oldal) A médialejátszóhoz való hálózati kapcsolódáshoz szükséges beállítások megadása befejeződött.
Csatlakozás WPS használatával (PIN mód) Ez a csatlakozási mód akkor érhető el, ha WPS funkcióval rendelkező hozzáférési pontot használ. PIN kódot használó csatlakozási módban (PIN mód) a kapcsolat létrehozásához a fényképezőgépen megadott 8 számjegyű azonosítószámot kell megadni a hozzáférési ponton. Ezzel a megosztott azonosítószámmal még sok hozzáférési pont esetén is viszonylag megbízhatóan hozható létre a kapcsolat. A kapcsolat létrehozásához körülbelül egy percre van szükség.
Csatlakozás WPS használatával (PIN mód) a [WPS (PIN mód)] 4 Válassza menüpontot. A gombokkal válassza ki a [WPS (PIN mód)] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. meg a PIN kódot a 5 Adja hozzáférési ponton. A hozzáférési ponton adja meg a fényképezőgép LCD-monitorán megjelenő 8 számjegyű PIN kódot.
Csatlakozás WPS használatával (PIN mód) az [Automatikus 7 Válassza beállítás] menüpontot. A gombokkal válassza ki az [Automatikus beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot a 2. lépésben kiválasztott Wi-Fi funkció beállítási képernyőjének megjelenítéséhez (77. oldal). Amennyiben az [Automatikus beállítás] hibát eredményez, vagy, ha manuálisan szeretné elvégezni a beállításokat, lásd: 160.
Csatlakozás WPS használatával (PIN mód) A Wi-Fi funkció beállításainak elvégzése Ebben a fejezetben a Wi-Fi funkció képernyőinek beállítását ismertetjük. Olvassa el a kiválasztott Wi-Fi funkciót bemutató oldalt. Csatlakoztatás okostelefonhoz: 8. fejezet (83. oldal) Képek nyomtatása Wi-Fi nyomtatóval: 9. fejezet (93. oldal) Képek megtekintése médialejátszóval: 10. fejezet (101. oldal) A médialejátszóhoz való hálózati kapcsolódáshoz szükséges beállítások megadása befejeződött.
Kézi csatlakozás a hálózatok keresésével Ha a [Hálózat keresése] menüpontot választja, megjelenik a közelben lévő aktív hozzáférési pontok listája, mely az egyes hozzáférési pontok adatait is tartalmazza. Válassza ki azon hozzáférési pont SSID (vagy ESS-ID) azonosítóját, amelyikhez kapcsolódni szeretne. A vezeték nélküli hálózat kiválasztása 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget.
Kézi csatlakozás a hálózatok keresésével a [Hálózat keresése] menüpontot. 4 Válassza A gombokkal válassza ki a [Hálózat keresése] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. (1) (2) (3) hozzáférési pontot. 5 Válasszon A <0> gomb megnyomásával engedélyezze a hozzáférési pont választását. A gombokkal válasszon egy hozzáférési pontot, majd nyomja meg a <0> gombot.
Kézi csatlakozás a hálózatok keresésével A vezeték nélküli hálózat titkosítókulcsának beírása Állítsa be a hozzáférési pont számára megadott titkosítókulcsot. A megadott titkosítási kulccsal kapcsolatos részletes információkért tekintse meg a hozzáférési pont kezelési kézikönyvét. A hozzáférési ponton megadott hitelesítési és titkosítási módszertől függően az alábbi 6-8. lépésben megjelenő képernyők eltérhetnek. Amennyiben a 6-8. lépés képernyői helyett az [IP-cím beáll.
Kézi csatlakozás a hálózatok keresésével Az IP-cím beállítása az [Automatikus 9 Válassza beállítás] menüpontot. A gombokkal válassza ki az [Automatikus beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot a 2. lépésben kiválasztott Wi-Fi funkció beállítási képernyőjének megjelenítéséhez (82. oldal). Amennyiben az [Automatikus beállítás] hibát eredményez, vagy, ha manuálisan szeretné elvégezni a beállításokat, lásd: 160.
Kézi csatlakozás a hálózatok keresésével A Wi-Fi funkció beállításainak elvégzése Ebben a fejezetben a Wi-Fi funkció képernyőinek beállítását ismertetjük. Olvassa el a kiválasztott Wi-Fi funkciót bemutató oldalt. Csatlakoztatás okostelefonhoz: 8. fejezet (83. oldal) Képek nyomtatása Wi-Fi nyomtatóval: 9. fejezet (93. oldal) Képek megtekintése médialejátszóval: 10. fejezet (101. oldal) A médialejátszóhoz való hálózati kapcsolódáshoz szükséges beállítások megadása befejeződött.
8 Wi-Fi csatlakoztatás okostelefonhoz A fényképezőgép okostelefonhoz való csatlakoztatása után a következőket teheti: • Megtekintheti és kezelheti a fényképezőgépen tárolt képeket az okostelefonról. • Az okostelefonra másolhatja a fényképezőgépen tárolt képeket. • Működtetheti a fényképezőgépet az okostelefonról, és képeket készíthet. Az itt szereplő útmutatásokat csak az okostelefon hozzáférési ponthoz csatlakoztatása után kövesse.
Infrastruktúra mód használata kapcsolat létesítéséhez Ezeket az utasításokat a 7. fejezetben leírt lépések után kell végrehajtani. A kapcsolat létrehozásához az okostelefonon is végre kell hajtani a megfelelő műveleteket. A részletekért tekintse meg az okostelefon kezelési kézikönyvét. Az NFC funkció használatával vagy a fényképezőgép hozzáférési pont módban történő csatlakoztatásával kapcsolatos információkért lásd az „Egyszerű csatlakoztatás okostelefonhoz” című fejezetet (25. oldal).
Infrastruktúra mód használata kapcsolat létesítéséhez Műveletek a fényképezőgépen a fényképezőgéphez. 3 Csatlakozzon A csatlakozás létrejötte után a A Camera Connect alkalmazásban beállított eszköznév fényképezőgép LCD-monitorán megjelenik a bal oldalt látható képernyő. A megtekinthető képek megadásához nyomja meg a gombot. A beállítással kapcsolatos információkért tekintse meg a 90. oldal 5. lépését. A gombbal válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot.
A fényképezőgép működtetése okostelefonnal A telepített Camera Connect alkalmazással rendelkező okostelefonok használatával megtekintheti a fényképezőgépen tárolt képeket, valamint távolról készíthet felvételeket a fényképezőgéppel. A Camera Connect főablaka A Camera Connect fő funkcióinak leírása alább olvasható. Érintse meg a képernyőt a kezelési eljárások megismeréséhez. [Images on camera/Képek a fényképezőgépen] Megjeleníthetők a fényképezőgépen tárolt képek.
A fényképezőgép működtetése okostelefonnal A kapcsolat bontása A kapcsolat bontásához végezze el az alábbi műveletek egyikét. Érintse meg a [t] ikont a Camera Connect képernyőjén. Állítsa a fényképezőgép főkapcsolóját <2> állásba. Ha meghatározza a megtekinthető képek körét (89. oldal), a Camera Connect alkalmazás funkcióinak köre is korlátozott lesz. Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel.
Újracsatlakozás A fényképezőgép olyan okostelefonokhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [q] lehetőséget. 2 Válassza Válassza ki a [q] (Csatlakozás okostelefonhoz) lehetőséget, és nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
Megtekinthető képek megadása A fényképezőgépen beállíthatja, hogy mely képeket lehessen megtekinteni okostelefonról. A képek megadhatók a kapcsolat beállítása során vagy a kapcsolat befejeződése után. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [q] lehetőséget. 2 Válassza Válassza ki a [q] (Csatlakozás okostelefonhoz) lehetőséget, és nyomja meg a <0> gombot. a [Beáll.k megtek.
Megtekinthető képek megadása [Fájl számtartománya] (Tartomány kijelölése) Első kép Utolsó kép A fájlszám szerint rendezett képek közül megadhatja a megtekinthető képek tartományának első és utolsó tagját. 1 A gombok segítségével válassza ki az első megtekinthető képet. 2 A <0> gomb megnyomásával jelenítheti meg a képválasztó képernyőt. A gombok segítségével vagy a <5> tárcsa elforgatásával válasszon egy képet.
Több kapcsolat beállításainak regisztrálása Legfeljebb három kapcsolatbeállítást regisztrálhat az okostelefonokhoz. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [q] lehetőséget. 2 Válassza Válassza ki a [q] (Csatlakozás okostelefonhoz) lehetőséget, és nyomja meg a <0> gombot. a [Beáll.választ.] lehetőséget. 3 Válassza Válassza a [Beáll.választ.
9 Wi-Fi csatlakoztatás Wi-Fi nyomtatóval A képeket közvetlenül kinyomtathatja, ha a fényképezőgépet vezeték nélküli helyi hálózat használatára és a PictBridge (vezeték nélküli LAN hálózat) vezeték nélküli LAN hálózaton keresztüli használatára alkalmas nyomtatóhoz csatlakoztatja. Az itt szereplő útmutatásokat csak a nyomtató hozzáférési ponthoz csatlakoztatása után kövesse.
Infrastruktúra mód használata kapcsolat létesítéséhez Ezeket az utasításokat a 7. fejezetben leírt lépések után kell végrehajtani. A fényképezőgép hozzáférési pont módjával történő csatlakoztatáshoz lásd: „A fényképezőgép hozzáférési pont módjának használata kapcsolat létesítéséhez” (54. oldal). 1 Válassza ki azt a nyomtatót, amelyikhez kapcsolódni szeretne. Amikor megjelenik az észlelt nyomtatók listája, válassza ki azt a nyomtatót, amelyikhez kapcsolódni szeretne, majd nyomja meg a <0> gombot.
Nyomtatás A képek nyomtatása egyenként Válassza ki, majd nyomtassa ki egyenként a képeket. 1 Válasszon ki egy nyomtatni kívánt képet. A <5> tárcsa elforgatásával válassza ki a nyomtatni kívánt képet, majd nyomja meg a <0> gombot. A gomb megnyomásával átválthat az indexképes megjelenítésre, és kiválaszthatja a képet. ki a [Kép nyomtatása] 2 Válassza lehetőséget. A gombokkal válassza ki a [Kép nyomtatása] lehetőséget, majd nyomja meg a <0> gombot.
Nyomtatás Nyomtatás az opciók beállításával Nyomtatás a nyomtatási beállítások megadásával. 1 Nyomja meg a <0> gombot. ki a [Kijel.nyomt.ra] 2 Válassza lehetőséget. A gombokkal válassza ki a [Kijel.nyomt.ra] lehetőséget, majd nyomja meg a <0> gombot. u Megjelenik a [Kijel.nyomt.ra] képernyő. be a nyomtatási 3 Állítsa beállításokat. A beállítási eljárásokkal kapcsolatos további információkért tekintse meg a Fényképezőgép Kezelési kézikönyvének „Képek nyomtatása” című fejezetét.
Nyomtatás a kapcsolatot. 5 Bontsa Nyomja meg a gombot az 1. lépésben látható képernyőre való visszatéréshez . A megerősítést kérő képernyő megjelenítéséhez ismételten nyomja meg a gombot. A gombbal válassza ki az [OK] lehetőséget, majd a kapcsolat bontásához nyomja meg a <0> gombot. u Újra megjelenik a [Wi-Fi funkció] képernyő. Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel.
Újracsatlakozás A fényképezőgép olyan nyomtatókhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [l] lehetőséget. 2 Válassza Válassza ki a [l] (Nyomtatás Wi-Fi nyomtatóról) lehetőséget, majd nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
Több kapcsolat beállításainak regisztrálása Legfeljebb három kapcsolatbeállítást regisztrálhat a nyomtatókhoz. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. a [l] lehetőséget. 2 Válassza Válassza ki a [l] (Nyomtatás Wi-Fi nyomtatóról) lehetőséget, majd nyomja meg a <0> gombot. a [Beáll.választ.] 3 Válassza lehetőséget. Válassza a [Beáll.választ.
100
10 Képek megtekintése médialejátszóval A fényképezőgépbe helyezett memóriakártyán található képeket vezeték nélküli hálózaton keresztül megtekintheti televíziókészüléken. A funkció használatához DLNA*-kompatibilis televízió, játékkonzol, okostelefon vagy hasonló médialejátszó szükséges. A kézikönyvben a „médialejátszó” az ilyen eszközökre utal.
A képek megtekintése tévékészüléken A fényképezőgépben lévő memóriakártyán található képeket médialejátszó használatával megtekintheti tévékészüléken. RAW-képek és videók nem jeleníthetők meg. A megtekintési műveleteket a médialejátszón kell elvégezni. A részleteket lásd a médialejátszó kezelési kézikönyvében. 1 Jelenítse meg a médialejátszó beállító-képernyőjét a tévén.
A képek megtekintése tévékészüléken A kapcsolat bontása 1 Válassza ki a [Bont, kilép.] lehetőséget. Válassza ki a [Bont, kilép.] lehetőséget, majd nyomja meg a <0> gombot. ki az [OK] lehetőséget. 2 Válassza A gombbal válassza ki az [OK] lehetőséget, majd a kapcsolat bontásához nyomja meg a <0> gombot. Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel.
Újracsatlakozás A fényképezőgép olyan médialejátszókhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. ki a [o] lehetőséget. 2 Válassza Válassza ki a [o] (Képek megtek. DLNA eszközökön) lehetőséget, majd nyomja meg a <0> gombot. létre a kapcsolatot. 3 Hozza Válassza ki a [Kapcsolód.
Több kapcsolat beállításainak regisztrálása Legfeljebb három kapcsolatbeállítást regisztrálhat a médialejátszókhoz. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. ki a [o] lehetőséget. 2 Válassza Válassza ki a [o] (Képek megtek. DLNA eszközökön) lehetőséget, majd nyomja meg a <0> gombot. a [Beáll.választ.] 3 Válassza lehetőséget. Válassza a [Beáll.választ.
106
11 Wi-Fi csatlakoztatás webszolgáltatáshoz A fényképezőgépen különböző webszolgáltatásokat regisztrálhat, és a fényképezőgépen tárolt képeket elküldheti azokba. Egyes területeken és országokban a CANON iMAGE GATEWAY webszolgáltatás nem támogatott. Arra vonatkozóan, hogy a CANON iMAGE GATEWAY szolgáltatásai mely országokban és területeken támogatottak, a Canon webhelyén (http://canon.com/cig) tájékozódhat.
Előkészítés Regisztráció a CANON iMAGE GATEWAY szolgáltatásba Képek webszolgáltatásba küldéséhez regisztrálnia kell a CANON iMAGE GATEWAY szolgáltatásba (ingyenes). Miután a CANON iMAGE GATEWAY felhasználójává válik, közzéteheti készített képeit online, és különböző szolgáltatásokat vehet igénybe. Ez a weboldal a képek regisztrált webszolgáltatásokon történő megosztásra is használható. Számítógépről vagy más eszközről csatlakozzon az internethez, nyissa meg a Canon weboldalát (http://www.canon.
Előkészítés A képek webszolgáltatásba küldésének általános eljárása a következő. 1 Az EOS Utility szoftvert futtató számítógép előkészítése. Az EOS szoftver CD-ROM segítségével telepítse az EOS Utility alkalmazást. 2 Nyissa meg a Canon webhelyét a számítógépről, és regisztráljon a CANON iMAGE GATEWAY webszolgáltatásra (ingyenes). Ha már regisztrált, folytassa a 3. lépéssel. 3 Csatlakoztassa a fényképezőgépet és a számítógépet interfészkábellel.
A hozzáférési pont típusának ellenőrzése Első lépésként ellenőrizze, hogy a hozzáférési pont támogatja-e a Wi-Fi készülékek egyszerű csatlakoztatását lehetővé tevő Wi-Fi Protected Setup (WPS) funkciót. Ha nem tudja, hogy az Ön által használt hozzáférési pont támogatja-e a WPS funkciót, akkor tekintse meg a hozzáférési pont kezelési kézikönyvét vagy más dokumentációját. Ha a WPS támogatott Ebben az esetben a következő két csatlakoztatási mód érhető el.
Csatlakozás WPS használatával (PBC mód) Ez a csatlakozási mód akkor érhető el, ha WPS funkcióval rendelkező hozzáférési pontot használ. Nyomógombos csatlakozási módban (PBC mód) a fényképezőgép és a hozzáférési pont egyszerűen csatlakoztatható a hozzáférési pont WPS gombjának megnyomásával. Ha a közelben több hozzáférési pont is működik, akkor a kapcsolat létesítése nehezebb lehet. Ebben az esetben próbálja a [WPS (PIN mód)] használatával létrehozni a kapcsolatot.
Csatlakozás WPS használatával (PBC mód) ki a webszolgáltatást. 3 Válassza Válassza ki a használni kívánt webszolgáltatást, és nyomja meg a <0> gombot. A lista tartalma és a lista elemeinek sorrendje a beállításoktól függően eltérhet. A használt webszolgáltatás később módosítható (126. oldal). u Amikor megjelenik a [Küldés ide] képernyő (125. oldal), válassza ki a célhelyet, és folytassa a 4. lépéssel. a [WPS (PBC mód)] 4 Válassza menüpontot.
Csatlakozás WPS használatával (PBC mód) az [Automatikus 6 Válassza beállítás] menüpontot. A gombokkal válassza ki az [Automatikus beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. A beállítások mentése automatikusan megtörténik, és megjelenik a kártyán található valamelyik kép. Amennyiben az [Automatikus beállítás] hibát eredményez, vagy, ha manuálisan szeretné elvégezni a beállításokat, lásd: 160.
Csatlakozás WPS használatával (PIN mód) Ez a csatlakozási mód akkor érhető el, ha WPS funkcióval rendelkező hozzáférési pontot használ. PIN kódot használó csatlakozási módban (PIN mód) a kapcsolat létrehozásához a fényképezőgépen megadott 8 számjegyű azonosítószámot kell megadni a hozzáférési ponton. Ezzel a megosztott azonosítószámmal még sok hozzáférési pont esetén is viszonylag megbízhatóan hozható létre a kapcsolat. A kapcsolat létrehozásához körülbelül egy percre van szükség.
Csatlakozás WPS használatával (PIN mód) a [WPS (PIN mód)] 4 Válassza menüpontot. A gombokkal válassza ki a [WPS (PIN mód)] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. meg a PIN kódot a 5 Adja hozzáférési ponton. A hozzáférési ponton adja meg a fényképezőgép LCD-monitorán megjelenő 8 számjegyű PIN kódot.
Csatlakozás WPS használatával (PIN mód) az [Automatikus 7 Válassza beállítás] menüpontot. A gombokkal válassza ki az [Automatikus beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. A beállítások mentése automatikusan megtörténik, és megjelenik a kártyán található valamelyik kép. Amennyiben az [Automatikus beállítás] hibát eredményez, vagy, ha manuálisan szeretné elvégezni a beállításokat, lásd: 160.
Kézi csatlakozás a hálózatok keresésével Ha a [Hálózat keresése] menüpontot választja, megjelenik a közelben lévő aktív hozzáférési pontok listája, mely az egyes hozzáférési pontok adatait is tartalmazza. Válassza ki azon hozzáférési pont SSID (vagy ESS-ID) azonosítóját, amelyikhez kapcsolódni szeretne. A vezeték nélküli hálózat kiválasztása 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget.
Kézi csatlakozás a hálózatok keresésével a [Hálózat keresése] 4 Válassza menüpontot. A gombokkal válassza ki a [Hálózat keresése] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. (1) (2) (3) hozzáférési pontot. 5 Válasszon A <0> gomb megnyomásával engedélyezze a hozzáférési pont választását. A gombokkal válasszon egy hozzáférési pontot, majd nyomja meg a <0> gombot.
Kézi csatlakozás a hálózatok keresésével A vezeték nélküli hálózat titkosítókulcsának beírása Állítsa be a hozzáférési pont számára megadott titkosítókulcsának. A megadott titkosítási kulccsal kapcsolatos részletes információkért tekintse meg a hozzáférési pont kezelési kézikönyvét. A hozzáférési ponton megadott hitelesítési és titkosítási módszertől függően az alábbi 6-8. lépésben megjelenő képernyők eltérhetnek. Amennyiben a 6-8. lépés képernyői helyett az [IP-cím beáll.
Kézi csatlakozás a hálózatok keresésével Az IP-cím beállítása az [Automatikus 9 Válassza beállítás] menüpontot. A gombokkal válassza ki az [Automatikus beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. A beállítások mentése automatikusan megtörténik, és megjelenik a kártyán található valamelyik kép. Amennyiben az [Automatikus beállítás] hibát eredményez, vagy, ha manuálisan szeretné elvégezni a beállításokat, lásd: 160.
Képek küldése webszolgáltatásba Ha meg szeretné osztani másokkal az elkészült videókat vagy fényképeket, küldje el azokat a fényképezőgépen regisztrált valamely webszolgáltatásba (például a CANON iMAGE GATEWAY szolgáltatásba). Az elküldött képek online albumba kerülnek a CANON iMAGE GATEWAY szolgáltatásban, és az albumra mutató hivatkozást küldi el a rendszer az egyes webszolgáltatásoknak. A kiválasztott webszolgáltatástól és beállításoktól függően a képek közvetlenül is elküldhetők a webszolgáltatásoknak.
Képek küldése webszolgáltatásba Ha a készüléken megjelenik a [Használati feltételek] képernyő, alaposan olvassa el az üzenetet, majd az [Elfogadom] lehetőség kiválasztásához nyomja meg a gombot. A képernyő a gombokkal görgethető. Több kép küldése Több kép kiválasztása és elküldése egyszerre. 1 Nyomja meg a <0> gombot. a [Kijelölt küld.] lehetőséget. 2 Válassza A küldött képek méretének kiválasztásához válassza a [Kép átméretez.] lehetőséget, és nyomja meg a <0> gombot.
Képek küldése webszolgáltatásba a képméretet. 4 Csökkentse Válassza ki a szükséges beállítást. Ha célként a YouTube szolgáltatást választotta, nem jelenik meg a [Kép átméretez.] képernyő. A következő képernyőn a gombokkal válasszon képméretet, majd nyomja meg a <0> gombot. el a képeket. 5 Küldje A gombokkal válassza ki a u [Küldés] lehetőséget, majd nyomja meg a <0> gombot. Megjelenik az átviteli folyamat képernyője.
Képek küldése webszolgáltatásba Csatlakoztatott állapotban a fényképezőgép exponálógombját lenyomva sem készíthető felvétel. RAW-képek nem küldhetők.
Képek küldése webszolgáltatásba Cél választása A fényképezőgépen tárolt képeket, illetve a megosztott képekre mutató hivatkozásokat a regisztrált célhelyekre is elküldheti. E-mail célhelyek és e-mail küldési beállítások csak a számítógépen adhatók meg. További információkért tekintse meg az EOS Utility kezelési kézikönyvét (PDF). Ha a [Feltöltés webszolg.-hoz] képernyőn a [w] (E-mail) lehetőséget választja, megjelenik a [Küldés ide] képernyő.
Újracsatlakozás A fényképezőgép olyan webszolgáltatásokhoz tud újracsatlakozni, amelyekhez már regisztrálva vannak a kapcsolat beállításai. A hozzáférési ponttal csak egyszer kell létrehozni a kapcsolatot. Nem kell minden webszolgáltatáshoz külön kapcsolatot létrehozni. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. ki a [m] menüpontot. 2 Válassza Válassza ki a [m] (Feltöltés webszolg.
Több kapcsolat beállításainak regisztrálása Legfeljebb három kapcsolatbeállítást regisztrálhat a webszolgáltatásokhoz. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. ki a [m] menüpontot. 2 Válassza Válassza ki a [m] (Feltöltés webszolg.-hoz) menüpontot, majd nyomja meg a <0> gombot. ki a webszolgáltatást. 3 Válassza Válassza ki a webszolgáltatást, és nyomja meg a <0> gombot.
128
12 Csatlakozás egy vezeték nélküli LAN hálózathoz megjelenítési képernyőről A Gyorsvezérlés funkció lejátszás közbeni megjelenítése lehetővé teszi, hogy a regisztrált kapcsolatcél-beállítások használatával csatlakozzon egy vezeték nélküli hálózathoz. A kapcsolatcél-beállítások nem állíthatók be a megjelenítési képernyőről. A kapcsolatcélok beállításait a menüképernyőn adhatja meg.
Kapcsolódás megjelenítési képernyőről A kapcsolatcél-beállítások regisztrációját követően a vezeték nélküli LAN funkciókat a lejátszás közben megjelenített Gyorsvezérlés képernyőről érheti el. A lejátszás közben megjelenített Gyorsvezérlés képernyő segítségével a következő kapcsolatok hozhatók létre a következő két funkcióhoz: [z] (Képek átvitele fényképezőgépek között) és [m] (Feltöltés webszolg.-hoz). 1 Jelenítse meg a Gyorsvezérlés képernyőt. Képmegjelenítés közben nyomja meg a gombot.
Kapcsolódás megjelenítési képernyőről létre a kapcsolatot. 4 Hozza Válassza ki a [Kapcsolód.] elemet, és nyomja meg a <0> gombot. u Megjelennek a kártyán lévő képek, és kiválaszthatja a küldeni kívánt képeket. Ha több csatlakozási cél beállításai is regisztrálva vannak, válassza a [Beáll.választ.] lehetőséget, válassza ki a kapcsolat célját, majd csatlakozzon ahhoz.
132
13 Beállítások kezelése 133
Beállítások ellenőrzése, módosítása vagy törlése Ellenőrizheti, módosíthatja vagy törölheti a fényképezőgépen elmentett kapcsolati beállításokat. A beállítások módosításához vagy törléséhez első lépésként bontsa a kapcsolatot. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. ki azt az elemet, 2 Válassza melynek beállításait ellenőrizni szeretné.
Beállítások ellenőrzése, módosítása vagy törlése beállítások ellenőrzése vagy 4 Amódosítása. Válasszon ki egy elemet, nyomja meg a <0> gombot, majd ellenőrizze vagy módosítsa a képernyőn megjelenő módosításokat. [Beáll.módosít.] A beállítások módosítása. A [Beáll.módosít.] lehetőség kiválasztása esetén a kapcsolat beállításainak konfigurálására szolgáló képernyő jelenik meg. A megjelenő utasításokat követve konfigurálja újra a beállításokat. [Beáll. nevének. módos.] A beállítások nevének módosítása.
Beállítások ellenőrzése, módosítása vagy törlése Beállítások törlése A fényképezőgépen elmentett csatlakozási beállítások törléséhez a 134. oldal 3. lépésében válassza a [Beállítások törlése] lehetőséget. 1 Válassza ki a [Beállítások törlése] lehetőséget. ki a törölni kívánt 2 Válassza beállítást. Válassza ki a törölni kívánt beállítást, majd nyomja meg a <0> gombot. A beállítás törléséhez a megerősítő párbeszédablakban válassza az [OK] lehetőséget.
Vezeték nélküli LAN hálózat beállításainak törlése Minden vezeték nélküli LAN beállítás törölhető. A vezeték nélküli hálózat beállításainak törlésével megakadályozhatja azok illetéktelenek kezébe kerülését a fényképezőgép kölcsönadásakor vagy átadásakor. 1 Válassza ki a [Wi-Fi funkció] beállítást. A [51] lapon adja meg a [Wi-Fi/NFC] beállítás számára az [Enged] értéket, majd válassza a [Wi-Fi funkció] lehetőséget. meg az gombot. 2 Nyomja u Megjelenik az általános beállítóképernyő.
Vezeték nélküli LAN hálózat beállításainak törlése Általános beállítások képernyő Az előző oldalon látható 3. lépésben megjelenített [Ált. beáll.] képernyőn lehetősége van módosítani és ellenőrizni a vezeték nélküli LAN beállításait. [Becenév módosítása] Módosíthatja a becenevet. Válassza ki a [Becenév módosítása] lehetőséget, majd a virtuális billentyűzet segítségével írja be a becenevet (22. oldal). [Hiba részletei] Ez a menüpont csatlakozási hiba esetén választható ki.
14 Hibaelhárítási útmutató 139
Hibaüzenetek kezelése Kapcsolódási hiba esetén a következő eljárások valamelyikének elvégzésével jelenítheti meg a hiba részleteit. Ezt követően a hiba oka az ebben a fejezetben bemutatott példák szerint szüntethető meg. Válassza ki a [51: Wi-Fi funkció] 9 [Ált. beáll.] 9 [Hiba részletei] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki a [Hiba részletei] lehetőséget a [Csatlakozás] képernyőn, majd nyomja meg a <0> gombot.
Hibaüzenetek kezelése 11: A csatlakozási hely nem található A [q] esetén fut a Camera Connect alkalmazás? u Létesítsen kapcsolatot a Camera Connect használatával (33. és 84. oldal). A [l] esetén be van kapcsolva a nyomtató? u Kapcsolja be a nyomtatót. Azonos titkosítókulcs használatára van beállítva a fényképezőgép és a hozzáférési pont hitelesítése? u Ez a hiba akkor fordul elő, ha a titkosítókulcsok nem egyeznek, amikor a titkosítás hitelesítése [Nyílt rendszer] lehetőségre van állítva.
Hibaüzenetek kezelése 21: A DHCP-szerver nem rendelt hozzá címet Mit ellenőrizzen a fényképezőgépen? A fényképezőgépen az IP-cím az [Auto hozzárend.] lehetőségre van állítva. Ez a helyes beállítás? u Ha nem használ DHCP-kiszolgálót, adja meg a beállításokat az IP-cím [Kézi beállítás] értékre állítása után a fényképezőgépen (160. oldal). Mit ellenőrizzen a DHCP-kiszolgálón? Be van kapcsolva a DHCP-kiszolgáló? u Kapcsolja be a DHCP-kiszolgálót.
Hibaüzenetek kezelése 22: Nincs válasz a DNS-szervertől Mit ellenőrizzen a fényképezőgépen? A fényképezőgépen a DNS-kiszolgáló IP-cím beállítása megegyezik a kiszolgáló aktuális címével? u Állítsa az IP-címet [Kézi beállítás] módra. Majd a fényképezőgépen állítsa be a használt DNS-szerver IP-címét (156. és 160. oldal). Mit ellenőrizzen a DNS-kiszolgálón? Be van kapcsolva a DNS-kiszolgáló? u Kapcsolja be a DNS-kiszolgálót.
Hibaüzenetek kezelése 23: A kiválasztott hálózaton azonos IP-című eszköz van jelen Mit ellenőrizzen a fényképezőgépen? A fényképezőgép hálózatában szerepel olyan eszköz, amely ugyanazt az IP-címet használja, mint a fényképezőgép? u Módosítsa a fényképezőgép IP-címét, hogy ne használja ugyanazt a címet, mint a hálózatba kapcsolt másik eszköz. Egyéb esetben pedig módosítsa annak az eszköznek az IP-címét, amelynek a fényképezőgéppel azonos címet használ.
Hibaüzenetek kezelése 61: Nem található a kiválasztott SSID azonosítóhoz tartozó vezeték nélküli LAN hálózat Van bármilyen akadály a fényképezőgép és a hozzáférési pont antennája között? u Helyezze a hozzáférési pont antennáját a fényképezőgép által látható helyzetbe (154. oldal).
Hibaüzenetek kezelése 63: Sikertelen vezeték nélküli LAN hitelesítés Azonos hitelesítési módszer használatára van beállítva a fényképezőgép és a hozzáférési pont? A fényképezőgép a következő hitelesítési módszereket támogatja: [Nyílt rendszer], [Megosztott kulcs] és [WPA/WPA2-PSK] (79. és 118. oldal). Azonos titkosítókulcs használatára van beállítva a fényképezőgép és a hozzáférési pont hitelesítése? A beállításnál a készülék megkülönbözteti a kis- és nagybetűket, ezért ügyeljen a helyes írásmódra.
Hibaüzenetek kezelése 65: Megszakadt a vezeték nélküli LAN-kapcsolat Van bármilyen akadály a fényképezőgép és a hozzáférési pont antennája között? u Helyezze a hozzáférési pont antennáját a fényképezőgép által látható helyzetbe (154. oldal). A vezeték nélküli hálózati kapcsolat valamilyen okból megszakadt, és a kapcsolat nem állítható helyre. u Ennek lehetséges okai: más eszköz túlságosan leterheli a hozzáférési pontot, a közelben mikrohullámú sütő vagy más hasonló eszköz működik (zavarva az IEEE 802.
Hibaüzenetek kezelése 68: Nem lehet csatlakozni a vezeték nélküli LAN-terminálhoz. Próbálja meg újra elölről. Lenyomva tartotta a hozzáférési pont WPS (Wi-Fi Protected Setup) gombját a megadott ideig? u Tartsa nyomva a hozzáférési pont WPS gombját a hozzáférési pont kezelési kézikönyvében jelzett ideig. A hozzáférési pont közelében próbálja meg létrehozni a kapcsolatot? u Akkor próbálja meg létrehozni a kapcsolatot, amikor a két eszköz egymás közelében van.
Hibaüzenetek kezelése 102: Nem lehetett fájlokat küldeni Elegendő hely áll rendelkezésre az adatokat fogadó fényképezőgép memóriakártyáján? u Ellenőrizze az adatokat fogadó fényképezőgép kártyáját. Cserélje ki a kártyát, vagy szabadítson fel rajta elegendő helyet, majd próbálkozzon újra az adatok küldésével. Nincs zárolva az adatokat fogadó fényképezőgép memóriakártyája? u Ellenőrizze az adatokat fogadó fényképezőgép kártyáját. Oldja fel a zárolást, majd próbálkozzon újra az adatok küldésével.
Hibaüzenetek kezelése 105: Nem lehetett fájlokat fogadni. A kártya írásvédelmi kapcsolója lezárt állapotban van Nincs zárolva az adatokat fogadó fényképezőgép memóriakártyája? u Ellenőrizze az adatokat fogadó fényképezőgép kártyáját. Oldja fel a zárolást, majd próbálkozzon újra az adatok küldésével. 106: Nem lehetett fájlokat fogadni. A mappa- és a fájlszám elérte a maximális értéket Ellenőrizze, hogy az adatokat fogadó fényképezőgépen a mappaszám nem érte-e el a 999-et, a fájlszám pedig a 9999-et.
Hibaüzenetek kezelése 122: Csatlakoztassa számítógéphez, és javítsa ki a webszolgáltatás beállításait az EOS szoftverrel. Előfordulhat, hogy nem sikerült beállítani a webszolgáltatást. u Csatlakoztassa a fényképezőgépet és a számítógépet interfészkábellel, és konfigurálja újra a webszolgáltatás beállításait az EOS Utility programmal (109. oldal). 123: Nem lehet bejelentkezni a webszolgáltatásba. Csatlakoztassa számítógéphez a fényképezőgépet, és javítsa ki a beállításokat az EOS szoftverrel.
Hibaüzenetek kezelése 127: Hiba történt A webszolgáltatáshoz való csatlakozás során a 121–126 közötti tartományon kívüli hiba történt. u Próbálkozzon újra a webszolgáltatáshoz való csatlakozással. 141: A nyomtató foglalt. Próbáljon meg ismét csatlakozni. A nyomtató éppen nyomtat? u Csatlakozzon a nyomtatóhoz a nyomtatás befejezése után. Másik fényképezőgép csatlakozik a nyomtatóhoz? u Akkor csatlakozzon újra a nyomtatóhoz, ha a másik fényképezőgép és a nyomtató közötti kapcsolatot már megszüntették.
Hibaelhárítási útmutató Ha probléma merül fel a fényképezőgéppel, előbb tanulmányozza ezt a hibaelhárítási útmutatót. Ha a hibaelhárítási útmutatóval nem oldható meg a probléma, forduljon az eladóhoz vagy a legközelebbi Canon szervizközponthoz. Egy kábellel csatlakoztatott eszköz nem használható. Állítsa a [51: Wi-Fi/NFC] beállítást [Tilt] lehetőségre.
Vezeték nélküli LAN hálózattal kapcsolatos megjegyzések Ha az átviteli sebesség lecsökken, a kapcsolat megszakad, illetve más probléma jelentkezik a fényképezőgép vezeték nélküli hálózattal történő használatakor, próbálkozzon az alábbi javítóműveletekkel. Hozzáférési pont és antennájának telepítési helye Beltéren történő használat esetén abban a helyiségben helyezze üzembe a készüléket, ahol a fényképezőgépet használja. Az eszközt a fényképezőgépnél magasabbra helyezze el.
Vezeték nélküli LAN hálózattal kapcsolatos megjegyzések Biztonság Ha a biztonsági beállítások nem lettek megfelelően beállítva, a következő problémák merülhetnek fel. Adatátvitel figyelése Ártó szándékú harmadik felek figyelhetik a vezeték nélküli helyi hálózat (LAN) adatforgalmát, és megpróbálhatják megszerezni küldött adatait.
Hálózati beállítások ellenőrzése Windows Indítsa el a Windows [Parancssort]. Írja be az ipconfig/all parancsot, majd nyomja meg az billentyűt. Megjelenik a számítógéphez rendelt IP-cím, valamint az alhálózati maszk, az átjáró és a DNS-kiszolgáló adatai. Annak érdekében, hogy a fényképezőgéphez társítandó IP-cím megadásakor nehogy a számítógép vagy a hálózathoz kapcsolt egyéb eszközök IP-címét használja, módosítsa az IP-cím jobb szélén található számokat a 160. oldalon leírt eljárásokat követve.
15 Referencia 157
A hálózat kézi beállítása A fényképezőgép hozzáférési pont mód hálózati beállításainak kézi megadása. A megjelenő képernyőkön adja meg az [SSID], a [Csatornabeállítás] és a [Titkosítás beállításai] értékeit. 1 Válassza a [Kézi csatlakozás] lehetőséget. A gombok segítségével válassza ki a [Kézi csatlakozás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd a <0> gomb megnyomásával lépjen a következő képernyőre. be egy SSID azonosítót 2 Írjon (hálózati nevet).
A hálózat kézi beállítása ki a kívánt titkosítási 4 Válassza beállítást. Válasszon ki egy elemet, majd nyomja meg a <0> gombot. Titkosításként válassza az [AES] lehetőséget. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. Az [AES] lehetőség kiválasztásakor megjelenik a virtuális billentyűzet (22. oldal). Írjon be egy tetszőleges karakterekből álló titkosítókulcsot, majd a beállításhoz nyomja meg a gombot. u Ekkor megjelenik a beállított SSID és titkosítókulcs.
Az IP-cím kézi beállítása Az infrastruktúra mód IP-cím beállításainak manuális megadása. A megjelenő elemek a Wi-Fi funkciótól függően eltérőek. 1 Válassza a [Kézi beállítás] lehetőséget. A gombokkal válassza ki a [Kézi beállítás] lehetőséget, majd nyomja meg a <0> gombot. Válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. ki a beállítani kívánt elemet. 2 Válassza A gombokkal válasszon ki egy elemet, majd nyomja meg a <0> gombot. Megjelenik a számbeviteli képernyő.
Az IP-cím kézi beállítása ki az [OK] lehetőséget. 4 Válassza A szükséges elemek beállítását követően a gombok segítségével válassza ki az [OK] lehetőséget, majd nyomja meg a <0> gombot. u Megjelenik a Wi-Fi funkció beállítására szolgáló képernyő. Ha nem biztos abban, hogy mit kell beírnia, tekintse meg a „Hálózati beállítások ellenőrzése” részt (156. oldal), vagy forduljon a hálózati rendszergazdához, illetve a hálózatot ismerő más személyhez.
Műszaki adatok 9Vezeték nélküli helyi hálózat Szabványoknak való megfelelőség:IEEE 802.11b/g/n Átviteli módszer: DS-SS moduláció (IEEE 802.11b) OFDM moduláció (IEEE 802.11g/n) Átviteli távolság: Kb. 15 m *Okostelefonhoz történő csatlakoztatás esetén *Az adó és a vevő antennái közötti akadályok, illetve rádióinterferencia nélkül Átviteli frekvencia (központi frekvencia): Csatlakozási mód: Biztonság: NFC-kapcsolat: Frekvencia Csatorna 2412–2462 MHz 1–11.
A Wi-Fi (vezeték nélküli LAN) használatával kapcsolatos óvintézkedések 9A vezeték nélküli LAN használatát engedélyező térségek és országok A vezeték nélküli LAN használata bizonyos országokban és térségekben korlátozva van, jogtalan használata pedig a nemzeti vagy helyi jogszabályoknak megfelelően büntethető. A vezeték nélküli LAN hálózatokra vonatkozó szabályozások betartása érdekében keresse fel a Canon webhelyét, és ellenőrizze, hol engedélyezett annak használata.
164
Tárgymutató A A képméret csökkentése.........48, 123 Android................................26, 27, 68 Automatikus kikapcsolás.................16 B Beállítások ....................................134 Ellenőrzés.................................135 Módosítás .................................135 Nevek módosítása....................135 Regisztráció....51, 92, 99, 105, 127 Törlés........................................136 Becenév ..........................................20 Billentyűzet.........................
Tárgymutató P PictBridge .................................53, 93 PIN kódot használó csatlakozási mód ....................74, 114 R Rejtőzködő funkciók................70, 110 T Távoli felvételkészítés...............35, 86 Ú Újracsatlakozás .................37, 50, 60, 88, 98, 104, 126 V Vezeték nélküli hálózat beállításainak törlése ....................137 Vezeték nélküli hozzáférési pont ...110 Vezeték nélküli LAN hálózattal kapcsolatos megjegyzések...........154 W Wi-Fi nyomtató......................
167
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japán Európa, Afrika és a Közel-Kelet CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, Hollandia A helyi Canon-iroda elérhetőségét lásd a garancialevélen vagy a www.canon-europe.com/Support címen A terméket és a kapcsolódó garanciát az európai országokban a Canon Europa N.V. biztosítja. CEL-SV8SA2F1 © CANON INC.