Picture Style Editor Ver.1.16 for Windows Instruction Manual

Introduction

Preparing

a Sample

Basic

Windows

Pre-adjustments

Image

Characteristics

Saving

Preferences

Reference

Contents

Drag each slider.

The settings are applied to the image.

Setting Sharpness, Contrast, Color Saturation and Color Tone

[Fineness] or [Threshold] in [Sharpness] cannot be set for the

images shot with a camera which does not have [Fine Detail] as a

preset Picture Style.

You can use the tone curve to adjust brightness and contrast under

RGB.

Use the tone curve in this tab sheet before adjusting with the [Six Color-

Axes] tab sheet or [Specific Colors] tab sheet.

Adjust the brightness and contrast.

The brightness and contrast of the image change.

 The horizontal axis shows the input level and the vertical axis

shows the output level.

 The maximum number of [ ] is 10.

 To delete a [ ], select the [ ] and then either press the <Del>

key on the keyboard or double-click on the [ ].

Adjusting the Gamma Characteristic for RGB

The value of the

selected point (you can

also enter numerical

values)

Click to add a [ ]

(adjustment point) and

adjust by dragging

Note that if you adjust the tone curve in the [Basic] tab after making

adjustments with the [Six Color-Axes] tab sheet or [Specific Colors]

tab sheet, the color characteristic will be further adjusted and

intended image characteristics may not be achieved. To further

adjust brightness and contrast after adjusting with the [Six Color-

Axes] tab sheet or [Specific Colors] tab sheet, use the tone curve for

adjusting luminosity in the [Specific Colors] tab sheet.