Instruction Manual

Assignable Buttons
108
4 Navigate the menus to find the menu setting you want to register and then press the joystick.
• The selected menu setting will be registered to the customizable slot and to the assignable button.
• The name of the selected menu setting will be listed instead of [User Setting (NONE)] and the customizable
slot will be marked by a .
NOTES
• You can check the two [Assignable Buttons] status screens (A 177) to see what functions are set for the
assignable buttons.
• You can reset only the functions assigned to the assignable buttons, without affecting other camera settings,
with the [w Other Functions] > [Reset] > [Assignable Buttons] function. All the assignable buttons will return
to their default function.
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function. For some functions,
an options menu may appear. In such case, select the desired option and then press the joystick.
Assignable Functions
Functions can be set separately in mode and mode. Refer to the following table for assignable
functions and available modes.
Function name Description A
[ONE-SHOT AF] The camcorder focuses automatically one time only (One-shot AF function). Ü – 74
[AF LOCK] Locks the focus when using continuous AF and face AF. Ü – 75
[Face AF]
Activates the autofocus mode in the following sequence:
Face priority J Face only J Off
Ü – 76
[PUSH AUTO IRIS] The camcorder automatically adjusts the aperture (f/stop). Ü – 65
[Iris Mode] Switches the aperture mode. Ü – 63
[Iris +] Opens up the aperture. Ü –
63
[Iris -] Closes the aperture. Ü –
[AE Shift +] Compensates the exposure toward the bright side. Ü –
66
[AE Shift -] Compensates the exposure toward the dark side. Ü –
[Backlight] Turns the [Backlight] light metering option on/off. Ü –
67
[Spotlight] Turns the [Spotlight] light metering option on/off. Ü –
[ISO/GAIN] Highlights the ISO speed or gain value so it can be adjusted. Ü – 60
[SHUTTER] Highlights the shutter speed so it can be adjusted. Ü – 57
[View Assist.] Turns view assistance on/off. Ü – 53
[HDMI LUT] Applies a LUT to the video signal output from the HDMI OUT terminal. Ü – 138
[PEAKING] Turns peaking on/off. Ü – 72
[ZEBRA] Turns zebra patterns on/off. Ü – 79
[WFM]
Activates video scopes in the following sequence:
Waveform monitor J Vectorscope J Edge monitor ( mode only) J Off
Ü Ü 92
[MAGN.] Turns magnification on/off. Ü – 73
[DISP.] Switches the onscreen displays. Ü Ü 52
[Color Bars] Turns color bars on/off. Ü – 91
[Markers] Turns onscreen markers on/off. Ü – 78
[OLED Setup] Opens the [OLED Setup] submenu. Ü Ü
37
[Viewfinder Setup] Opens the [Viewfinder Setup] submenu. Ü Ü
[OLED/VF B&W] Turns the B&W mode of the OLED screen and viewfinder on/off. Ü Ü 37
COPY