Instruction Manual

121
Customizing Functions and Onscreen Displays
Customizing Functions and Onscreen Displays
Customize the camcorder to match your shooting style and needs. Use the [w Other Functions] > [Custom
Function] setting to adjust how some of the camcorder’s controls and functions operate in mode.
Similarly, use the [£ OLED/VF Setup] > [Custom Display 1] or [Custom Display 2] setting to customize the
onscreen displays that appear during recording. You can save these preferences along with other menu settings
to an SD card and use them again later (A 123).
Customizing Functions
The following table describes which functions can be customized using
[Custom Function].
1 Open the [Custom Function] submenu.
[w Other Functions] > [Custom Function]
2 Select the desired function.
3 Change the setting option and then press the joystick.
Operating modes:
[w Other Functions]
[Custom Function]
Customizable functions with [Custom Function]
Menu item Description
[Shockless WB] When this function is set to [On], it creates a softer transition when the white balance is changed.
[AE Response] Controls the camcorder’s response ([Fast], [Normal] or [Slow]) when you change the automatic exposure setting.
[Grip Ctrl Dial Dir.] Changes the direction of the adjustment ([Normal] or [Reverse]) when operating the control dial.
[Retract Lens]
When an optional Canon EF40mm f/2.8 STM lens is attached to the camcorder, the lens will fully retract when the
camcorder is turned off.
[Focus Assistance
B&W]
Automatically switches the screen to B&W while the focus assist functions (peaking and magnification) are activated. You
can have the screen switch to B&W only when peaking is activated ([Peaking]), only when the magnification is activated
([Magnify]) or when either function is activated ([Both]).
[Magn. Add. Disp.]
Simultaneously activates peaking ([Peaking]) or displays the edge monitor ([Edge Monitor]) whenever the magnification
function is used.
[Scan Reverse Rec] Inverts the recorded image horizontally ([Horizontal]), vertically ([Vertical]) or both ([Both]).
[C START/STOP]
Selects whether the START/STOP button will be active or locked too when the Q switch is set to C (key lock)
(A 49).
COPY