Instruction Manual

Video Scopes

The camcorder can display a simplified waveform monitor or vectorscope. It can also display an edge monitor to

help you focus. The video scopes appear only on the OLED screen. They do not appear in the viewfinder or on

an external monitor.

Displaying a Video Scope

Press the WFM button.

• The waveform monitor will appear in a window on the lower right of

the screen.

• You can press the WFM button repeatedly to activate the video

scopes in the following sequence.

Waveform monitor  Vectorscope  Edge monitor  Off

• Alternatively, you can display the video scopes using [w Other

Functions] > [WFM (OLED)] > [Setting]. Select [WFM] for the

waveform monitor, [VS] for the vectorscope or [Edge Mon.] for the

edge monitor.

Configuring the Waveform Monitor

The camcorder’s waveform monitor function offers 5 modes. You can also

change the gain.

1 Open the waveform monitor [Type] submenu.

[w Other Functions] > [WFM (OLED)] > [Waveform Monitor] >

[Type]

2 Select the desired option and then press the joystick.

• If you do not need to change the gain, you do not need to perform

steps 3 and 4.

3 Open the waveform monitor [Gain] submenu.

[w Other Functions] > [WFM (OLED)] > [Waveform Monitor] > [Gain]

4 Select [1x] or [2x] and then press the joystick.

Options

Operating modes:

[Line]: Sets the waveform monitor to line display mode.

[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode waveform.

[Field]: Sets the waveform monitor to field display mode.

[RGB]: Functions like an RGB parade scope.

[YPbPr]: Functions like a YPbPr parade scope.

[w Other Functions]

[WFM (OLED)]

[Waveform Monitor]

[Type]

[Line]

COPY