Operation Manual

95
Reviewing a Recording
Reviewing a Recording
When the camcorder is in mode, you can review the last clip that
was recorded.
1 Open the [Review Recording] submenu to set the review length.
[w Other Functions] > [Review Recording]
2 Select the desired option and then press the joystick.
3 After you finish recording, press the
u button.
• The last clip that was recorded is played back without audio for
the selected duration. [Ð REVIEW] appears at the top of the
screen.
• Press the CANCEL button to stop reviewing the clip and change
the camcorder back to record pause mode.
• After the clip finishes playing back, the camcorder returns to
record pause mode.
Options
NOTES
• During a special recording mode, you cannot review a clip.
• If the camcorder switched SD cards during a recording, the camcorder will play back the clip on the SD card
most recently recorded on.
Operating modes:
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
[w Other Functions]
[Review Recording]
[Entire Clip]