PUB. DIE-0520-000 Digital Cinema Camera Firmware ver. 1.0.1.1.
Color Grading with the ACES Workflow Post-production RAW data CFast card Cinema RAW Development Input Transform MP4 data SDI terminal OpenEXR (ACES 1.0) Color grading ASCCDL Input Transform SD card ACESproxy Output Transform Inverse log ASC-CDL Output Transform On-set Color Grading ACESproxy: ACESproxy video data that is output from the SDI terminal when performing on-set color grading. Select the [LUT: ACESproxy] option for the LUT setting, depending on where the video is to be output (A 3).
Applying a LUT to Screens/Video Outputs While recording using special gamma curves, you can apply a LUT to video output from the SDI terminal, VIDEO terminal or viewfinder (k only). When a LUT is applied, the displayed image will look as if a standard gamma curve were used, making it easier to check the image on the display device used. To check the image on an external monitor, you will need a monitor that is compatible with the video’s color space.
Options Applied LUT 1 2 Output Settings with LUT applied Description Gamma curve Color space [LUT: BT.709] Wide DR BT.709 LUT for viewing on the screen or external monitors compatible with BT.709 specifications. [LUT: HDR Assist. (1600%)]1, [LUT: HDR Assist. (400%)]1 Original gamma curve BT.709 LUT for viewing HDR (high dynamic range) images on monitoring devices connected to the VIDEO terminal. The LUT follows the BT.