EOS C200, EOS C200B Instruction Manual

141

Playback

Playing Back Clips

After you select a clip to play back from the index screen, you can control

the playback with the buttons on the camera (play/pause/stop only) or

with the joystick and onscreen joystick guide (A 143).

1 Move the orange selection frame to the clip you want to play

back.

2 Press the

button to start playback.

• The selected clip will be played back.

• Press the

button again or press the joystick to pause/resume

the playback.

• Press the

button to stop the playback and return to the index

screen.

IMPORTANT

• Observe the following precautions while an access indicator is illuminated in red. Failure to do so may result in

permanent data loss.

- Do not disconnect the power source or turn off the camera.

- Do not open the card slot cover of the card being accessed and do not remove the card.

Onscreen Displays

Custom picture settings of RAW clips during playback

RAW clips are played back with the following custom picture settings.

[Gamma]: [Wide DR]

[Color Space]: [BT.709]

[Color Matrix]: [Neutral]

Other picture settings are the same as those when [Activate Other Settings] is set to [Off].

5 6 7 8 9

1816 17 2019