EOS C200, EOS C200B Instruction Manual

Preparing Recording Media

Recovering Clips

Some actions, such as suddenly turning off the camera or removing the recording media while data is being

recorded, can cause data errors in the recorded clip.

1 Open the index screen with the clip you wish to recover (A 139).

2 Select the desired clip (a clip with the icon instead of a thumbnail image) and then press the

joystick.

3 Select [Recover Clip] and then press the joystick.

4 Select [OK] and then press the joystick.

• The camera will attempt to recover the corrupted data.

5 When the confirmation message appears, press the joystick.

NOTES

• In the RAW clip or MP4 clip index screen, recovered clips appear with a

icon instead of the usual

thumbnail.

• This procedure may delete clips shorter than 0.5 seconds in length.

• In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted

or the recording media is physically damaged.

• Only clips recorded with this camera can be recovered. Photos cannot be recovered.

Operating modes: