User manual
Video Scopes
108
8 Open the waveform monitor [Y Position] submenu.
[ Assistance Functions] > [WFM] > [Waveform Monitor] > [Y Position]
9 Select the desired percentage and then press SET.
Options
[Line]: Sets the waveform monitor to line display mode.
[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode
waveform.
[Select Line]: The selected horizontal line will be displayed along with its waveform.
[Field]: Sets the waveform monitor to field display mode.
[RGB]: Functions like an RGB parade scope.
[YPbPr]: Functions like a YPbPr parade scope.
NOTESNOTES
• You can choose to display the waveform monitor on the LCD screen or viewfinder or output it to the MON. and
HDMI OUT terminals (together) with the [ Assistance Functions] > [WFM] > [Output] setting.
• The waveform monitor will not be affected even if a LUT is applied to the LCD screen and viewfinder.