User manual

ManualsBrandsCanon ManualsCinema EOS CamerasEOS C300 Mark II PL

121

122

123

124

125

126

127

128

129

130

129

Browser Remote: Controlling the Camera via Wi-Fi

To adjust the focus and use focus-related functions

Touch/click the [Focus] tab in the detailed camera settings panel. To use the

following functions, make sure that the AF mode switch on the lens is set to AF.

• If the focus mode switch on the EF lens is set to MF, you will not be able to

use Browser Remote to control the focus. Depending on the lens used,

remote operation may not work correctly.

1 AF mode button

2 AF frame position button

Touch/click the button to select the position of the AF frame. Select

[Center] for a fixed AF frame at the center of the live view screen, or

[Selectable] to be able to touch/click the live view screen to select where to

focus (A 130).

3 Face AF mode button

Touch/click the button to select how the camera will focus when the Face

AF function is activated and no face is detected (A 87).

4 [AF Speed] button

Touch/click the button to select the adjustment speed of applicable lenses when using autofocus functions

(A 85).

5 [Face Det. & Tracking] button

6 [Focus Guide] (Dual Pixel Focus Guide function) button

7 [ONE-SHOT AF] button (A 129) / [AF Lock] button (A 130)

8 Tracking buttons

9 Manual focus buttons

Manual focus

1 Touch/click the AF mode button and select [One Shot].

2 Touch/click one of the manual focus buttons on the [Near] side to focus closer or one of the controls on the

[Far] side to focus farther away. There are three levels of adjustment - [ ]/[ ] is the smallest and [ ]/[ ] the

largest.

Focus Guide

1 Touch the [Focus Guide] button.

2 Touch [On] to display the focus guide (A 82).

One-shot AF

1 Touch/click the AF mode button and select [One Shot].

2 Touch click the [ONE-SHOT AF] button.

• A white AF frame will appear on the live view screen and the camera will focus automatically.

• When correct focus has been achieved, the AF frame turns green. If the camera cannot focus automatically,

the AF frame will turn red.

• When the AF frame position is set to [Selectable], you can touch/click the live view screen to select where to

focus (A 130).